/* arminit.c -- ARMulator initialization: ARM6 Instruction Emulator.
Copyright (C) 1994 Advanced RISC Machines Ltd.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "common/platform.h"
#if EMU_PLATFORM == PLATFORM_LINUX
#include <unistd.h>
#endif
#include <math.h>
#include "core/arm/interpreter/armdefs.h"
#include "core/arm/interpreter/armemu.h"
/***************************************************************************\
* Definitions for the emulator architecture *
\***************************************************************************/
void ARMul_EmulateInit (void);
ARMul_State *ARMul_NewState (ARMul_State * state);
void ARMul_Reset (ARMul_State * state);
ARMword ARMul_DoCycle (ARMul_State * state);
unsigned ARMul_DoCoPro (ARMul_State * state);
ARMword ARMul_DoProg (ARMul_State * state);
ARMword ARMul_DoInstr (ARMul_State * state);
void ARMul_Abort (ARMul_State * state, ARMword address);
unsigned ARMul_MultTable[32] =
{ 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9,
10, 10, 11, 11, 12, 12, 13, 13, 14, 14, 15, 15, 16, 16, 16
};
ARMword ARMul_ImmedTable[4096]; /* immediate DP LHS values */
char ARMul_BitList[256]; /* number of bits in a byte table */
//chy 2006-02-22 add test debugmode
extern int debugmode;
extern int remote_interrupt( void );
void arm_dyncom_Abort(ARMul_State * state, ARMword vector)
{
ARMul_Abort(state, vector);
}
/* ahe-ykl : the following code to initialize user mode
code is architecture dependent and probably model dependant. */
//#include "skyeye_arch.h"
//#include "skyeye_pref.h"
//#include "skyeye_exec_info.h"
//#include "bank_defs.h"
#include "armcpu.h"
//#include "skyeye_callback.h"
//void arm_user_mode_init(generic_arch_t * arch_instance)
//{
// sky_pref_t *pref = get_skyeye_pref();
//
// if (pref->user_mode_sim)
// {
// sky_exec_info_t *info = get_skyeye_exec_info();
// info->arch_page_size = 0x1000;
// info->arch_stack_top = 0x1ffffff0;// + 0x401fe7 - 0xff0; /* arbitrary value */
// /* stack initial address specific to architecture may be placed here */
//
// /* we need to mmap the stack space, if we are using skyeye space */
// if (info->mmap_access)
// {
// /* get system stack size */
// size_t stacksize = 0;
// pthread_attr_t attr;
// pthread_attr_init(&attr);
// pthread_attr_getstacksize(&attr, &stacksize);
// if (stacksize > info->arch_stack_top)
// {
// printf("arch_stack_top is too low\n");
// stacksize = info->arch_stack_top;
// }
//
// /* Note: Skyeye is occupating 0x400000 to 0x600000 */
// /* We do a mmap */
// void* ret = mmap( (info->arch_stack_top) - stacksize,
// stacksize + 0x1000 , PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
// if (ret == MAP_FAILED){
// /* ideally, we should find an empty space until it works */
// printf("mmap error, stack couldn't be mapped: errno %d\n", errno);
// exit(-1);
// } else {
// memset(ret, '\0', stacksize);
// //printf("stack top has been defined at %x size %x\n", (uint32_t) ret + stacksize, stacksize);
// //info->arch_stack_top = (uint32_t) ret + stacksize;
// }
// }
//
// exec_stack_init();
//
// ARM_CPU_State* cpu = get_current_cpu();
// arm_core_t* core = &cpu->core[0];
//
// uint32_t sp = info->initial_sp;
//
// core->Cpsr = 0x10; /* User mode */
// /* FIXME: may need to add thumb */
// core->Reg[13] = sp;
// core->Reg[10] = info->start_data;
// core->Reg[0] = 0;
// bus_read(32, sp + 4, &(core->Reg[1]));
// bus_read(32, sp + 8, &(core->Reg[2]));
// }
//
//}
/***************************************************************************\
* Call this routine once to set up the emulator's tables. *
\***************************************************************************/
void
ARMul_EmulateInit (void)
{
unsigned int i, j;
for (i = 0; i < 4096; i++) { /* the values of 12 bit dp rhs's */
ARMul_ImmedTable[i] = ROTATER (i & 0xffL, (i >> 7L) & 0x1eL);
}
for (i = 0; i < 256; ARMul_BitList[i++] = 0); /* how many bits in LSM */
for (j = 1; j < 256; j <<= 1)
for (i = 0; i < 256; i++)
if ((i & j) > 0)
ARMul_BitList[i]++;
for (i = 0; i < 256; i++)
ARMul_BitList[i] *= 4; /* you always need 4 times these values */
}
/***************************************************************************\
* Returns a new instantiation of the ARMulator's state *
\***************************************************************************/
ARMul_State *
ARMul_NewState (ARMul_State *state)
{
unsigned i, j;
memset (state, 0, sizeof (ARMul_State));
state->Emulate = RUN;
for (i = 0; i < 16; i++) {
state->Reg[i] = 0;
for (j = 0; j < 7; j++)
state->RegBank[j][i] = 0;
}
for (i = 0; i < 7; i++)
state->Spsr[i] = 0;
state->Mode = 0;
state->CallDebug = FALSE;
state->Debug = FALSE;
state->VectorCatch = 0;
state->Aborted = FALSE;
state->Reseted = FALSE;
state->Inted = 3;
state->LastInted = 3;
state->CommandLine = NULL;
state->EventSet = 0;
state->Now = 0;
state->EventPtr =
(struct EventNode **) malloc ((unsigned) EVENTLISTSIZE *
sizeof (struct EventNode *));
#if DIFF_STATE
state->state_log = fopen("/data/state.log", "w");
printf("create pc log file.\n");
#endif
if (state->EventPtr == NULL) {
printf ("SKYEYE: ARMul_NewState malloc state->EventPtr error\n");
exit(-1);
}
for (i = 0; i < EVENTLISTSIZE; i++)
*(state->EventPtr + i) = NULL;
#if SAVE_LOG
state->state_log = fopen("/tmp/state.log", "w");
printf("create pc log file.\n");
#else
#if DIFF_LOG
state->state_log = fopen("/tmp/state.log", "r");
printf("loaded pc log file.\n");
#endif
#endif
#ifdef ARM61
state->prog32Sig = LOW;
state->data32Sig = LOW;
#else
state->prog32Sig = HIGH;
state->data32Sig = HIGH;
#endif
state->lateabtSig = HIGH;
state->bigendSig = LOW;
//chy:2003-08-19
state->LastTime = 0;
state->CP14R0_CCD = -1;
/* ahe-ykl: common function for interpret and dyncom */
//sky_pref_t *pref = get_skyeye_pref();
//if (pref->user_mode_sim)
// register_callback(arm_user_mode_init, Bootmach_callback);
memset(&state->exclusive_tag_array[0], 0xFF, sizeof(state->exclusive_tag_array[0]) * 128);
state->exclusive_access_state = 0;
//state->cpu = (cpu_config_t *) malloc (sizeof (cpu_config_t));
//state->mem_bank = (mem_config_t *) malloc (sizeof (mem_config_t));
return (state);
}
/***************************************************************************\
* Call this routine to set ARMulator to model a certain processor *
\***************************************************************************/
void
ARMul_SelectProcessor (ARMul_State * state, unsigned properties)
{
if (properties & ARM_Fix26_Prop) {
state->prog32Sig = LOW;
state->data32Sig = LOW;
}
else {
state->prog32Sig = HIGH;
state->data32Sig = HIGH;
}
/* 2004-05-09 chy
below line sould be in skyeye_mach_XXX.c 's XXX_mach_init function
*/
// state->lateabtSig = HIGH;
state->is_v4 =
(properties & (ARM_v4_Prop | ARM_v5_Prop)) ? HIGH : LOW;
state->is_v5 = (properties & ARM_v5_Prop) ? HIGH : LOW;
state->is_v5e = (properties & ARM_v5e_Prop) ? HIGH : LOW;
state->is_XScale = (properties & ARM_XScale_Prop) ? HIGH : LOW;
state->is_iWMMXt = (properties & ARM_iWMMXt_Prop) ? HIGH : LOW;
/* state->is_v6 = LOW */;
/* jeff.du 2010-08-05 */
state->is_v6 = (properties & ARM_v6_Prop) ? HIGH : LOW;
state->is_ep9312 = (properties & ARM_ep9312_Prop) ? HIGH : LOW;
//chy 2005-09-19
state->is_pxa27x = (properties & ARM_PXA27X_Prop) ? HIGH : LOW;
/* shenoubang 2012-3-11 */
state->is_v7 = (properties & ARM_v7_Prop) ? HIGH : LOW;
/* Only initialse the coprocessor support once we
know what kind of chip we are dealing with. */
ARMul_CoProInit (state);
}
/***************************************************************************\
* Call this routine to set up the initial machine state (or perform a RESET *
\***************************************************************************/
void
ARMul_Reset (ARMul_State * state)
{
//fprintf(stderr,"armul_reset 0: state-> Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
state->NextInstr = 0;
if (state->prog32Sig) {
state->Reg[15] = 0;
state->Cpsr = INTBITS | SVC32MODE;
state->Mode = SVC32MODE;
}
else {
state->Reg[15] = R15INTBITS | SVC26MODE;
state->Cpsr = INTBITS | SVC26MODE;
state->Mode = SVC26MODE;
}
//fprintf(stderr,"armul_reset 1: state-> Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
ARMul_CPSRAltered (state);
state->Bank = SVCBANK;
FLUSHPIPE;
state->EndCondition = 0;
state->ErrorCode = 0;
//fprintf(stderr,"armul_reset 2: state-> Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
state->NresetSig = HIGH;
state->NfiqSig = HIGH;
state->NirqSig = HIGH;
state->NtransSig = (state->Mode & 3) ? HIGH : LOW;
state->abortSig = LOW;
state->AbortAddr = 1;
state->NumInstrs = 0;
state->NumNcycles = 0;
state->NumScycles = 0;
state->NumIcycles = 0;
state->NumCcycles = 0;
state->NumFcycles = 0;
//fprintf(stderr,"armul_reset 3: state-> Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
mmu_reset (state);
//fprintf(stderr,"armul_reset 4: state-> Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
//mem_reset (state); /* move to memory/ram.c */
//fprintf(stderr,"armul_reset 5: state-> Cpsr 0x%x, Mode %d\n",state->Cpsr,state->Mode);
/*remove later. walimis 03.7.17 */
//io_reset(state);
//lcd_disable(state);
/*ywc 2005-04-07 move from ARMul_NewState , because skyeye_config.no_dbct will
*be configured in skyeye_option_init and it is called after ARMul_NewState*/
state->tea_break_ok = 0;
state->tea_break_addr = 0;
state->tea_pc = 0;
#ifdef DBCT
if (!skyeye_config.no_dbct) {
//teawater add for arm2x86 2005.02.14-------------------------------------------
if (arm2x86_init (state)) {
printf ("SKYEYE: arm2x86_init error\n");
skyeye_exit (-1);
}
//AJ2D--------------------------------------------------------------------------
}
#endif
}
/***************************************************************************\
* Emulate the execution of an entire program. Start the correct emulator *
* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the *
* address of the last instruction that is executed. *
\***************************************************************************/
//teawater add DBCT_TEST_SPEED 2005.10.04---------------------------------------
#ifdef DBCT_TEST_SPEED
static ARMul_State *dbct_test_speed_state = NULL;
static void
dbct_test_speed_sig(int signo)
{
printf("\n0x%llx %llu\n", dbct_test_speed_state->instr_count, dbct_test_speed_state->instr_count);
skyeye_exit(0);
}
#endif //DBCT_TEST_SPEED
//AJ2D--------------------------------------------------------------------------
ARMword
ARMul_DoProg (ARMul_State * state)
{
ARMword pc = 0;
/*
* 2007-01-24 removed the term-io functions by Anthony Lee,
* moved to "device/uart/skyeye_uart_stdio.c".
*/
//teawater add DBCT_TEST_SPEED 2005.10.04---------------------------------------
#ifdef DBCT_TEST_SPEED
{
if (!dbct_test_speed_state) {
//init timer
struct itimerval value;
struct sigaction act;
dbct_test_speed_state = state;
state->instr_count = 0;
act.sa_handler = dbct_test_speed_sig;
act.sa_flags = SA_RESTART;
//cygwin don't support ITIMER_VIRTUAL or ITIMER_PROF
#ifndef __CYGWIN__
if (sigaction(SIGVTALRM, &act, NULL) == -1) {
#else
if (sigaction(SIGALRM, &act, NULL) == -1) {
#endif //__CYGWIN__
fprintf(stderr, "init timer error.\n");
skyeye_exit(-1);
}
if (skyeye_config.dbct_test_speed_sec) {
value.it_value.tv_sec = skyeye_config.dbct_test_speed_sec;
}
else {
value.it_value.tv_sec = DBCT_TEST_SPEED_SEC;
}
printf("dbct_test_speed_sec = %ld\n", value.it_value.tv_sec);
value.it_value.tv_usec = 0;
value.it_interval.tv_sec = 0;
value.it_interval.tv_usec = 0;
#ifndef __CYGWIN__
if (setitimer(ITIMER_VIRTUAL, &value, NULL) == -1) {
#else
if (setitimer(ITIMER_REAL, &value, NULL) == -1) {
#endif //__CYGWIN__
fprintf(stderr, "init timer error.\n");
skyeye_exit(-1);
}
}
}
#endif //DBCT_TEST_SPEED
//AJ2D--------------------------------------------------------------------------
state->Emulate = RUN;
while (state->Emulate != STOP) {
state->Emulate = RUN;
/*ywc 2005-03-31 */
if (state->prog32Sig && ARMul_MODE32BIT) {
#ifdef DBCT
if (skyeye_config.no_dbct) {
pc = ARMul_Emulate32 (state);
}
else {
pc = ARMul_Emulate32_dbct (state);
}
#else
pc = ARMul_Emulate32 (state);
#endif
}
else {
_dbg_assert_msg_(ARM11, false, "Unsupported ARM 26-bit Mode!");
}
//chy 2006-02-22, should test debugmode first
//chy 2006-04-14, put below codes in ARMul_Emulate
#if 0
if(debugmode)
if(remote_interrupt())
state->Emulate = STOP;
#endif
}
/*
* 2007-01-24 removed the term-io functions by Anthony Lee,
* moved to "device/uart/skyeye_uart_stdio.c".
*/
return (pc);
}
/***************************************************************************\
* Emulate the execution of one instruction. Start the correct emulator *
* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the *
* address of the instruction that is executed. *
\***************************************************************************/
ARMword
ARMul_DoInstr (ARMul_State * state)
{
ARMword pc = 0;
state->Emulate = ONCE;
/*ywc 2005-03-31 */
if (state->prog32Sig && ARMul_MODE32BIT) {
#ifdef DBCT
if (skyeye_config.no_dbct) {
pc = ARMul_Emulate32 (state);
}
else {
//teawater add compile switch for DBCT GDB RSP function 2005.10.21--------------
#ifndef DBCT_GDBRSP
printf("DBCT GDBRSP function switch is off.\n");
printf("To use this function, open \"#define DBCT_GDBRSP\" in arch/arm/common/armdefs.h & recompile skyeye.\n");
skyeye_exit(-1);
#endif //DBCT_GDBRSP
//AJ2D--------------------------------------------------------------------------
pc = ARMul_Emulate32_dbct (state);
}
#else
pc = ARMul_Emulate32 (state);
#endif
}
else {
_dbg_assert_msg_(ARM11, false, "Unsupported ARM 26-bit Mode!");
}
return (pc);
}
/***************************************************************************\
* This routine causes an Abort to occur, including selecting the correct *
* mode, register bank, and the saving of registers. Call with the *
* appropriate vector's memory address (0,4,8 ....) *
\***************************************************************************/
void
ARMul_Abort (ARMul_State * state, ARMword vector)
{
ARMword temp;
int isize = INSN_SIZE;
int esize = (TFLAG ? 0 : 4);
int e2size = (TFLAG ? -4 : 0);
state->Aborted = FALSE;
if (state->prog32Sig)
if (ARMul_MODE26BIT)
temp = R15PC;
else
temp = state->Reg[15];
else
temp = R15PC | ECC | ER15INT | EMODE;
switch (vector) {
case ARMul_ResetV: /* RESET */
SETABORT (INTBITS, state->prog32Sig ? SVC32MODE : SVC26MODE,
0);
break;
case ARMul_UndefinedInstrV: /* Undefined Instruction */
SETABORT (IBIT, state->prog32Sig ? UNDEF32MODE : SVC26MODE,
isize);
break;
case ARMul_SWIV: /* Software Interrupt */
// Modified SETABORT that doesn't branch to a SVC vector as we are implementing this in HLE
// Instead of doing normal routine, backup R15 by one instruction (this is what PC will get
// set to, making it the next instruction after the SVC call), and skip setting the LR.
SETABORT_SKIPBRANCH (IBIT, state->prog32Sig ? SVC32MODE : SVC26MODE,
isize);
state->Reg[15] -= 4;
return;
case ARMul_PrefetchAbortV: /* Prefetch Abort */
state->AbortAddr = 1;
SETABORT (IBIT, state->prog32Sig ? ABORT32MODE : SVC26MODE,
esize);
break;
case ARMul_DataAbortV: /* Data Abort */
SETABORT (IBIT, state->prog32Sig ? ABORT32MODE : SVC26MODE,
e2size);
break;
case ARMul_AddrExceptnV: /* Address Exception */
SETABORT (IBIT, SVC26MODE, isize);
break;
case ARMul_IRQV: /* IRQ */
//chy 2003-09-02 the if sentence seems no use
#if 0
if (!state->is_XScale || !state->CPRead[13] (state, 0, &temp)
|| (temp & ARMul_CP13_R0_IRQ))
#endif
SETABORT (IBIT,
state->prog32Sig ? IRQ32MODE : IRQ26MODE,
esize);
break;
case ARMul_FIQV: /* FIQ */
//chy 2003-09-02 the if sentence seems no use
#if 0
if (!state->is_XScale || !state->CPRead[13] (state, 0, &temp)
|| (temp & ARMul_CP13_R0_FIQ))
#endif
SETABORT (INTBITS,
state->prog32Sig ? FIQ32MODE : FIQ26MODE,
esize);
break;
}
if (ARMul_MODE32BIT) {
if (state->mmu.control & CONTROL_VECTOR)
vector += 0xffff0000; //for v4 high exception address
if (state->vector_remap_flag)
vector += state->vector_remap_addr; /* support some remap function in LPC processor */
ARMul_SetR15 (state, vector);
}
else
ARMul_SetR15 (state, R15CCINTMODE | vector);
}
