From 854c933716f0f5e1dbf62157c5a76e65213b30b2 Mon Sep 17 00:00:00 2001 From: german77 Date: Mon, 20 Sep 2021 16:41:15 -0500 Subject: input_common: Create input poller and mapping --- src/input_common/input_poller.h | 189 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 src/input_common/input_poller.h (limited to 'src/input_common/input_poller.h') diff --git a/src/input_common/input_poller.h b/src/input_common/input_poller.h new file mode 100644 index 000000000..3c1e5b541 --- /dev/null +++ b/src/input_common/input_poller.h @@ -0,0 +1,189 @@ +// Copyright 2021 yuzu Emulator Project +// Licensed under GPLv2 or any later version +// Refer to the license.txt file included + +#pragma once + +namespace Input { +class InputDevice; + +template +class Factory; +}; // namespace Input + +namespace InputCommon { +class InputEngine; +/** + * An Input factory. It receives input events and forward them to all input devices it created. + */ +class InputFactory final : public Input::Factory { +public: + explicit InputFactory(std::shared_ptr input_engine_); + + /** + * Creates a input device from the parameters given. Identifies the type of input to be returned + * if it contains the following parameters: + * - button: Contains "button" or "code" + * - hat_button: Contains "hat" + * - analog: Contains "axis" + * - trigger: Contains "button" and "axis" + * - stick: Contains "axis_x" and "axis_y" + * - motion: Contains "axis_x", "axis_y" and "axis_z" + * - motion: Contains "motion" + * - touch: Contains "button", "axis_x" and "axis_y" + * - battery: Contains "battery" + * @param params contains parameters for creating the device: + * @param - "code": the code of the keyboard key to bind with the input + * @param - "button": same as "code" but for controller buttons + * @param - "hat": similar as "button" but it's a group of hat buttons from SDL + * @param - "axis": the axis number of the axis to bind with the input + * @param - "motion": the motion number of the motion to bind with the input + * @param - "axis_x": same as axis but specifing horizontal direction + * @param - "axis_y": same as axis but specifing vertical direction + * @param - "axis_z": same as axis but specifing forward direction + * @param - "battery": Only used as a placeholder to set the input type + * @return an unique input device with the parameters specified + */ + std::unique_ptr Create(const Common::ParamPackage& params) override; + +private: + /** + * Creates a button device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "code": the code of the keyboard key to bind with the input + * @param - "button": same as "code" but for controller buttons + * @param - "toggle": press once to enable, press again to disable + * @param - "inverted": inverts the output of the button + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateButtonDevice(const Common::ParamPackage& params); + + /** + * Creates a hat button device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "button": the controller hat id to bind with the input + * @param - "direction": the direction id to be detected + * @param - "toggle": press once to enable, press again to disable + * @param - "inverted": inverts the output of the button + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateHatButtonDevice(const Common::ParamPackage& params); + + /** + * Creates a stick device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "axis_x": the controller horizontal axis id to bind with the input + * @param - "axis_y": the controller vertical axis id to bind with the input + * @param - "deadzone": the mimimum required value to be detected + * @param - "range": the maximum value required to reach 100% + * @param - "threshold": the mimimum required value to considered pressed + * @param - "offset_x": the amount of offset in the x axis + * @param - "offset_y": the amount of offset in the y axis + * @param - "invert_x": inverts the sign of the horizontal axis + * @param - "invert_y": inverts the sign of the vertical axis + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateStickDevice(const Common::ParamPackage& params); + + /** + * Creates an analog device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "axis": the controller axis id to bind with the input + * @param - "deadzone": the mimimum required value to be detected + * @param - "range": the maximum value required to reach 100% + * @param - "threshold": the mimimum required value to considered pressed + * @param - "offset": the amount of offset in the axis + * @param - "invert": inverts the sign of the axis + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateAnalogDevice(const Common::ParamPackage& params); + + /** + * Creates a trigger device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "button": the controller hat id to bind with the input + * @param - "direction": the direction id to be detected + * @param - "toggle": press once to enable, press again to disable + * @param - "inverted": inverts the output of the button + * @param - "axis": the controller axis id to bind with the input + * @param - "deadzone": the mimimum required value to be detected + * @param - "range": the maximum value required to reach 100% + * @param - "threshold": the mimimum required value to considered pressed + * @param - "offset": the amount of offset in the axis + * @param - "invert": inverts the sign of the axis + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateTriggerDevice(const Common::ParamPackage& params); + + /** + * Creates a touch device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "button": the controller hat id to bind with the input + * @param - "direction": the direction id to be detected + * @param - "toggle": press once to enable, press again to disable + * @param - "inverted": inverts the output of the button + * @param - "axis_x": the controller horizontal axis id to bind with the input + * @param - "axis_y": the controller vertical axis id to bind with the input + * @param - "deadzone": the mimimum required value to be detected + * @param - "range": the maximum value required to reach 100% + * @param - "threshold": the mimimum required value to considered pressed + * @param - "offset_x": the amount of offset in the x axis + * @param - "offset_y": the amount of offset in the y axis + * @param - "invert_x": inverts the sign of the horizontal axis + * @param - "invert_y": inverts the sign of the vertical axis + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateTouchDevice(const Common::ParamPackage& params); + + /** + * Creates a battery device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateBatteryDevice(const Common::ParamPackage& params); + + /** + * Creates a motion device from the parameters given. + * @param params contains parameters for creating the device: + * @param - "axis_x": the controller horizontal axis id to bind with the input + * @param - "axis_y": the controller vertical axis id to bind with the input + * @param - "axis_z": the controller fordward axis id to bind with the input + * @param - "deadzone": the mimimum required value to be detected + * @param - "range": the maximum value required to reach 100% + * @param - "offset_x": the amount of offset in the x axis + * @param - "offset_y": the amount of offset in the y axis + * @param - "offset_z": the amount of offset in the z axis + * @param - "invert_x": inverts the sign of the horizontal axis + * @param - "invert_y": inverts the sign of the vertical axis + * @param - "invert_z": inverts the sign of the fordward axis + * @param - "guid": text string for identifing controllers + * @param - "port": port of the connected device + * @param - "pad": slot of the connected controller + * @return an unique input device with the parameters specified + */ + std::unique_ptr CreateMotionDevice(Common::ParamPackage params); + + std::shared_ptr input_engine; +}; +} // namespace InputCommon -- cgit v1.2.3