From 72b03025ac4ef0d8633c2f3e55b513cd149c59e5 Mon Sep 17 00:00:00 2001 From: bunnei Date: Thu, 12 Oct 2017 21:21:49 -0400 Subject: Remove lots more 3DS-specific code. --- src/core/hle/service/hid/hid.cpp | 425 +-------------------------------------- 1 file changed, 3 insertions(+), 422 deletions(-) (limited to 'src/core/hle/service/hid/hid.cpp') diff --git a/src/core/hle/service/hid/hid.cpp b/src/core/hle/service/hid/hid.cpp index 379fbd71c..f838713a3 100644 --- a/src/core/hle/service/hid/hid.cpp +++ b/src/core/hle/service/hid/hid.cpp @@ -2,437 +2,18 @@ // Licensed under GPLv2 or any later version // Refer to the license.txt file included. -#include -#include -#include -#include #include "common/logging/log.h" -#include "core/3ds.h" -#include "core/core.h" -#include "core/core_timing.h" -#include "core/frontend/input.h" -#include "core/hle/ipc.h" -#include "core/hle/kernel/event.h" -#include "core/hle/kernel/handle_table.h" -#include "core/hle/kernel/shared_memory.h" #include "core/hle/service/hid/hid.h" -#include "core/hle/service/hid/hid_spvr.h" -#include "core/hle/service/hid/hid_user.h" #include "core/hle/service/service.h" namespace Service { namespace HID { -// Handle to shared memory region designated to HID_User service -static Kernel::SharedPtr shared_mem; +void Init() {} -// Event handles -static Kernel::SharedPtr event_pad_or_touch_1; -static Kernel::SharedPtr event_pad_or_touch_2; -static Kernel::SharedPtr event_accelerometer; -static Kernel::SharedPtr event_gyroscope; -static Kernel::SharedPtr event_debug_pad; +void Shutdown() {} -static u32 next_pad_index; -static u32 next_touch_index; -static u32 next_accelerometer_index; -static u32 next_gyroscope_index; - -static int enable_accelerometer_count; // positive means enabled -static int enable_gyroscope_count; // positive means enabled - -static int pad_update_event; -static int accelerometer_update_event; -static int gyroscope_update_event; - -// Updating period for each HID device. These empirical values are measured from a 11.2 3DS. -constexpr u64 pad_update_ticks = BASE_CLOCK_RATE_ARM11 / 234; -constexpr u64 accelerometer_update_ticks = BASE_CLOCK_RATE_ARM11 / 104; -constexpr u64 gyroscope_update_ticks = BASE_CLOCK_RATE_ARM11 / 101; - -constexpr float accelerometer_coef = 512.0f; // measured from hw test result -constexpr float gyroscope_coef = 14.375f; // got from hwtest GetGyroscopeLowRawToDpsCoefficient call - -static std::atomic is_device_reload_pending; -static std::array, Settings::NativeButton::NUM_BUTTONS_HID> - buttons; -static std::unique_ptr circle_pad; -static std::unique_ptr motion_device; -static std::unique_ptr touch_device; - -DirectionState GetStickDirectionState(s16 circle_pad_x, s16 circle_pad_y) { - // 30 degree and 60 degree are angular thresholds for directions - constexpr float TAN30 = 0.577350269f; - constexpr float TAN60 = 1 / TAN30; - // a circle pad radius greater than 40 will trigger circle pad direction - constexpr int CIRCLE_PAD_THRESHOLD_SQUARE = 40 * 40; - DirectionState state{false, false, false, false}; - - if (circle_pad_x * circle_pad_x + circle_pad_y * circle_pad_y > CIRCLE_PAD_THRESHOLD_SQUARE) { - float t = std::abs(static_cast(circle_pad_y) / circle_pad_x); - - if (circle_pad_x != 0 && t < TAN60) { - if (circle_pad_x > 0) - state.right = true; - else - state.left = true; - } - - if (circle_pad_x == 0 || t > TAN30) { - if (circle_pad_y > 0) - state.up = true; - else - state.down = true; - } - } - - return state; -} - -static void LoadInputDevices() { - std::transform(Settings::values.buttons.begin() + Settings::NativeButton::BUTTON_HID_BEGIN, - Settings::values.buttons.begin() + Settings::NativeButton::BUTTON_HID_END, - buttons.begin(), Input::CreateDevice); - circle_pad = Input::CreateDevice( - Settings::values.analogs[Settings::NativeAnalog::CirclePad]); - motion_device = Input::CreateDevice(Settings::values.motion_device); - touch_device = Input::CreateDevice(Settings::values.touch_device); -} - -static void UnloadInputDevices() { - for (auto& button : buttons) { - button.reset(); - } - circle_pad.reset(); - motion_device.reset(); - touch_device.reset(); -} - -static void UpdatePadCallback(u64 userdata, int cycles_late) { - SharedMem* mem = reinterpret_cast(shared_mem->GetPointer()); - - if (is_device_reload_pending.exchange(false)) - LoadInputDevices(); - - PadState state; - using namespace Settings::NativeButton; - state.a.Assign(buttons[A - BUTTON_HID_BEGIN]->GetStatus()); - state.b.Assign(buttons[B - BUTTON_HID_BEGIN]->GetStatus()); - state.x.Assign(buttons[X - BUTTON_HID_BEGIN]->GetStatus()); - state.y.Assign(buttons[Y - BUTTON_HID_BEGIN]->GetStatus()); - state.right.Assign(buttons[Right - BUTTON_HID_BEGIN]->GetStatus()); - state.left.Assign(buttons[Left - BUTTON_HID_BEGIN]->GetStatus()); - state.up.Assign(buttons[Up - BUTTON_HID_BEGIN]->GetStatus()); - state.down.Assign(buttons[Down - BUTTON_HID_BEGIN]->GetStatus()); - state.l.Assign(buttons[L - BUTTON_HID_BEGIN]->GetStatus()); - state.r.Assign(buttons[R - BUTTON_HID_BEGIN]->GetStatus()); - state.start.Assign(buttons[Start - BUTTON_HID_BEGIN]->GetStatus()); - state.select.Assign(buttons[Select - BUTTON_HID_BEGIN]->GetStatus()); - - // Get current circle pad position and update circle pad direction - float circle_pad_x_f, circle_pad_y_f; - std::tie(circle_pad_x_f, circle_pad_y_f) = circle_pad->GetStatus(); - constexpr int MAX_CIRCLEPAD_POS = 0x9C; // Max value for a circle pad position - s16 circle_pad_x = static_cast(circle_pad_x_f * MAX_CIRCLEPAD_POS); - s16 circle_pad_y = static_cast(circle_pad_y_f * MAX_CIRCLEPAD_POS); - const DirectionState direction = GetStickDirectionState(circle_pad_x, circle_pad_y); - state.circle_up.Assign(direction.up); - state.circle_down.Assign(direction.down); - state.circle_left.Assign(direction.left); - state.circle_right.Assign(direction.right); - - mem->pad.current_state.hex = state.hex; - mem->pad.index = next_pad_index; - next_pad_index = (next_pad_index + 1) % mem->pad.entries.size(); - - // Get the previous Pad state - u32 last_entry_index = (mem->pad.index - 1) % mem->pad.entries.size(); - PadState old_state = mem->pad.entries[last_entry_index].current_state; - - // Compute bitmask with 1s for bits different from the old state - PadState changed = {{(state.hex ^ old_state.hex)}}; - - // Get the current Pad entry - PadDataEntry& pad_entry = mem->pad.entries[mem->pad.index]; - - // Update entry properties - pad_entry.current_state.hex = state.hex; - pad_entry.delta_additions.hex = changed.hex & state.hex; - pad_entry.delta_removals.hex = changed.hex & old_state.hex; - pad_entry.circle_pad_x = circle_pad_x; - pad_entry.circle_pad_y = circle_pad_y; - - // If we just updated index 0, provide a new timestamp - if (mem->pad.index == 0) { - mem->pad.index_reset_ticks_previous = mem->pad.index_reset_ticks; - mem->pad.index_reset_ticks = (s64)CoreTiming::GetTicks(); - } - - mem->touch.index = next_touch_index; - next_touch_index = (next_touch_index + 1) % mem->touch.entries.size(); - - // Get the current touch entry - TouchDataEntry& touch_entry = mem->touch.entries[mem->touch.index]; - bool pressed = false; - float x, y; - std::tie(x, y, pressed) = touch_device->GetStatus(); - touch_entry.x = static_cast(x * Core::kScreenBottomWidth); - touch_entry.y = static_cast(y * Core::kScreenBottomHeight); - touch_entry.valid.Assign(pressed ? 1 : 0); - - // TODO(bunnei): We're not doing anything with offset 0xA8 + 0x18 of HID SharedMemory, which - // supposedly is "Touch-screen entry, which contains the raw coordinate data prior to being - // converted to pixel coordinates." (http://3dbrew.org/wiki/HID_Shared_Memory#Offset_0xA8). - - // If we just updated index 0, provide a new timestamp - if (mem->touch.index == 0) { - mem->touch.index_reset_ticks_previous = mem->touch.index_reset_ticks; - mem->touch.index_reset_ticks = (s64)CoreTiming::GetTicks(); - } - - // Signal both handles when there's an update to Pad or touch - event_pad_or_touch_1->Signal(); - event_pad_or_touch_2->Signal(); - - // Reschedule recurrent event - CoreTiming::ScheduleEvent(pad_update_ticks - cycles_late, pad_update_event); -} - -static void UpdateAccelerometerCallback(u64 userdata, int cycles_late) { - SharedMem* mem = reinterpret_cast(shared_mem->GetPointer()); - - mem->accelerometer.index = next_accelerometer_index; - next_accelerometer_index = (next_accelerometer_index + 1) % mem->accelerometer.entries.size(); - - Math::Vec3 accel; - std::tie(accel, std::ignore) = motion_device->GetStatus(); - accel *= accelerometer_coef; - // TODO(wwylele): do a time stretch like the one in UpdateGyroscopeCallback - // The time stretch formula should be like - // stretched_vector = (raw_vector - gravity) * stretch_ratio + gravity - - AccelerometerDataEntry& accelerometer_entry = - mem->accelerometer.entries[mem->accelerometer.index]; - - accelerometer_entry.x = static_cast(accel.x); - accelerometer_entry.y = static_cast(accel.y); - accelerometer_entry.z = static_cast(accel.z); - - // Make up "raw" entry - // TODO(wwylele): - // From hardware testing, the raw_entry values are approximately, but not exactly, as twice as - // corresponding entries (or with a minus sign). It may caused by system calibration to the - // accelerometer. Figure out how it works, or, if no game reads raw_entry, the following three - // lines can be removed and leave raw_entry unimplemented. - mem->accelerometer.raw_entry.x = -2 * accelerometer_entry.x; - mem->accelerometer.raw_entry.z = 2 * accelerometer_entry.y; - mem->accelerometer.raw_entry.y = -2 * accelerometer_entry.z; - - // If we just updated index 0, provide a new timestamp - if (mem->accelerometer.index == 0) { - mem->accelerometer.index_reset_ticks_previous = mem->accelerometer.index_reset_ticks; - mem->accelerometer.index_reset_ticks = (s64)CoreTiming::GetTicks(); - } - - event_accelerometer->Signal(); - - // Reschedule recurrent event - CoreTiming::ScheduleEvent(accelerometer_update_ticks - cycles_late, accelerometer_update_event); -} - -static void UpdateGyroscopeCallback(u64 userdata, int cycles_late) { - SharedMem* mem = reinterpret_cast(shared_mem->GetPointer()); - - mem->gyroscope.index = next_gyroscope_index; - next_gyroscope_index = (next_gyroscope_index + 1) % mem->gyroscope.entries.size(); - - GyroscopeDataEntry& gyroscope_entry = mem->gyroscope.entries[mem->gyroscope.index]; - - Math::Vec3 gyro; - std::tie(std::ignore, gyro) = motion_device->GetStatus(); - double stretch = Core::System::GetInstance().perf_stats.GetLastFrameTimeScale(); - gyro *= gyroscope_coef * static_cast(stretch); - gyroscope_entry.x = static_cast(gyro.x); - gyroscope_entry.y = static_cast(gyro.y); - gyroscope_entry.z = static_cast(gyro.z); - - // Make up "raw" entry - mem->gyroscope.raw_entry.x = gyroscope_entry.x; - mem->gyroscope.raw_entry.z = -gyroscope_entry.y; - mem->gyroscope.raw_entry.y = gyroscope_entry.z; - - // If we just updated index 0, provide a new timestamp - if (mem->gyroscope.index == 0) { - mem->gyroscope.index_reset_ticks_previous = mem->gyroscope.index_reset_ticks; - mem->gyroscope.index_reset_ticks = (s64)CoreTiming::GetTicks(); - } - - event_gyroscope->Signal(); - - // Reschedule recurrent event - CoreTiming::ScheduleEvent(gyroscope_update_ticks - cycles_late, gyroscope_update_event); -} - -void GetIPCHandles(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - cmd_buff[1] = 0; // No error - cmd_buff[2] = 0x14000000; // IPC Command Structure translate-header - // TODO(yuriks): Return error from SendSyncRequest is this fails (part of IPC marshalling) - cmd_buff[3] = Kernel::g_handle_table.Create(Service::HID::shared_mem).Unwrap(); - cmd_buff[4] = Kernel::g_handle_table.Create(Service::HID::event_pad_or_touch_1).Unwrap(); - cmd_buff[5] = Kernel::g_handle_table.Create(Service::HID::event_pad_or_touch_2).Unwrap(); - cmd_buff[6] = Kernel::g_handle_table.Create(Service::HID::event_accelerometer).Unwrap(); - cmd_buff[7] = Kernel::g_handle_table.Create(Service::HID::event_gyroscope).Unwrap(); - cmd_buff[8] = Kernel::g_handle_table.Create(Service::HID::event_debug_pad).Unwrap(); -} - -void EnableAccelerometer(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - ++enable_accelerometer_count; - - // Schedules the accelerometer update event if the accelerometer was just enabled - if (enable_accelerometer_count == 1) { - CoreTiming::ScheduleEvent(accelerometer_update_ticks, accelerometer_update_event); - } - - cmd_buff[1] = RESULT_SUCCESS.raw; - - LOG_DEBUG(Service_HID, "called"); -} - -void DisableAccelerometer(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - --enable_accelerometer_count; - - // Unschedules the accelerometer update event if the accelerometer was just disabled - if (enable_accelerometer_count == 0) { - CoreTiming::UnscheduleEvent(accelerometer_update_event, 0); - } - - cmd_buff[1] = RESULT_SUCCESS.raw; - - LOG_DEBUG(Service_HID, "called"); -} - -void EnableGyroscopeLow(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - ++enable_gyroscope_count; - - // Schedules the gyroscope update event if the gyroscope was just enabled - if (enable_gyroscope_count == 1) { - CoreTiming::ScheduleEvent(gyroscope_update_ticks, gyroscope_update_event); - } - - cmd_buff[1] = RESULT_SUCCESS.raw; - - LOG_DEBUG(Service_HID, "called"); -} - -void DisableGyroscopeLow(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - --enable_gyroscope_count; - - // Unschedules the gyroscope update event if the gyroscope was just disabled - if (enable_gyroscope_count == 0) { - CoreTiming::UnscheduleEvent(gyroscope_update_event, 0); - } - - cmd_buff[1] = RESULT_SUCCESS.raw; - - LOG_DEBUG(Service_HID, "called"); -} - -void GetGyroscopeLowRawToDpsCoefficient(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - cmd_buff[1] = RESULT_SUCCESS.raw; - - f32 coef = gyroscope_coef; - memcpy(&cmd_buff[2], &coef, 4); -} - -void GetGyroscopeLowCalibrateParam(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - cmd_buff[1] = RESULT_SUCCESS.raw; - - const s16 param_unit = 6700; // an approximate value taken from hw - GyroscopeCalibrateParam param = { - {0, param_unit, -param_unit}, {0, param_unit, -param_unit}, {0, param_unit, -param_unit}, - }; - memcpy(&cmd_buff[2], ¶m, sizeof(param)); - - LOG_WARNING(Service_HID, "(STUBBED) called"); -} - -void GetSoundVolume(Service::Interface* self) { - u32* cmd_buff = Kernel::GetCommandBuffer(); - - const u8 volume = 0x3F; // TODO(purpasmart): Find out if this is the max value for the volume - - cmd_buff[1] = RESULT_SUCCESS.raw; - cmd_buff[2] = volume; - - LOG_WARNING(Service_HID, "(STUBBED) called"); -} - -void Init() { - using namespace Kernel; - - AddService(new HID_U_Interface); - AddService(new HID_SPVR_Interface); - - is_device_reload_pending.store(true); - - using Kernel::MemoryPermission; - shared_mem = - SharedMemory::Create(nullptr, 0x1000, MemoryPermission::ReadWrite, MemoryPermission::Read, - 0, Kernel::MemoryRegion::BASE, "HID:SharedMemory"); - - next_pad_index = 0; - next_touch_index = 0; - next_accelerometer_index = 0; - next_gyroscope_index = 0; - - enable_accelerometer_count = 0; - enable_gyroscope_count = 0; - - // Create event handles - event_pad_or_touch_1 = Event::Create(ResetType::OneShot, "HID:EventPadOrTouch1"); - event_pad_or_touch_2 = Event::Create(ResetType::OneShot, "HID:EventPadOrTouch2"); - event_accelerometer = Event::Create(ResetType::OneShot, "HID:EventAccelerometer"); - event_gyroscope = Event::Create(ResetType::OneShot, "HID:EventGyroscope"); - event_debug_pad = Event::Create(ResetType::OneShot, "HID:EventDebugPad"); - - // Register update callbacks - pad_update_event = CoreTiming::RegisterEvent("HID::UpdatePadCallback", UpdatePadCallback); - accelerometer_update_event = - CoreTiming::RegisterEvent("HID::UpdateAccelerometerCallback", UpdateAccelerometerCallback); - gyroscope_update_event = - CoreTiming::RegisterEvent("HID::UpdateGyroscopeCallback", UpdateGyroscopeCallback); - - CoreTiming::ScheduleEvent(pad_update_ticks, pad_update_event); -} - -void Shutdown() { - shared_mem = nullptr; - event_pad_or_touch_1 = nullptr; - event_pad_or_touch_2 = nullptr; - event_accelerometer = nullptr; - event_gyroscope = nullptr; - event_debug_pad = nullptr; - UnloadInputDevices(); -} - -void ReloadInputDevices() { - is_device_reload_pending.store(true); -} +void ReloadInputDevices() {} } // namespace HID - } // namespace Service -- cgit v1.2.3