From b1503b202043a577720e28969b74cca6f9c954f8 Mon Sep 17 00:00:00 2001 From: Emmanuel Gil Peyrot Date: Mon, 25 May 2015 20:34:09 +0200 Subject: Remove every trailing whitespace from the project (but externals). --- Doxyfile | 124 +++++++++++++++++++++++++++++++-------------------------------- 1 file changed, 62 insertions(+), 62 deletions(-) (limited to 'Doxyfile') diff --git a/Doxyfile b/Doxyfile index 92faa0b2a..6ddf2cf21 100644 --- a/Doxyfile +++ b/Doxyfile @@ -38,7 +38,7 @@ PROJECT_NAME = Citra # could be handy for archiving the generated documentation or if some version # control system is used. -PROJECT_NUMBER = +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a @@ -162,7 +162,7 @@ FULL_PATH_NAMES = YES # will be relative from the directory where doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. -STRIP_FROM_PATH = +STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the # path mentioned in the documentation of a class, which tells the reader which @@ -171,7 +171,7 @@ STRIP_FROM_PATH = # specify the list of include paths that are normally passed to the compiler # using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't @@ -238,13 +238,13 @@ TAB_SIZE = 4 # "Side Effects:". You can put \n's in the value part of an alias to insert # newlines. -ALIASES = +ALIASES = # This tag can be used to specify a number of word-keyword mappings (TCL only). # A mapping has the form "name=value". For example adding "class=itcl::class" # will allow you to use the command class in the itcl::class meaning. -TCL_SUBST = +TCL_SUBST = # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For @@ -291,7 +291,7 @@ OPTIMIZE_OUTPUT_VHDL = NO # Note that for custom extensions you also need to set FILE_PATTERNS otherwise # the files are not read by doxygen. -EXTENSION_MAPPING = +EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable @@ -627,7 +627,7 @@ GENERATE_DEPRECATEDLIST= YES # sections, marked by \if ... \endif and \cond # ... \endcond blocks. -ENABLED_SECTIONS = +ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the # initial value of a variable or macro / define can have for it to appear in the @@ -669,7 +669,7 @@ SHOW_NAMESPACES = YES # by doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated @@ -682,7 +682,7 @@ FILE_VERSION_FILTER = # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. -LAYOUT_FILE = +LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib @@ -692,7 +692,7 @@ LAYOUT_FILE = # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. -CITE_BIB_FILES = +CITE_BIB_FILES = #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages @@ -751,7 +751,7 @@ WARN_FORMAT = "$file:$line: $text" # messages should be written. If left blank the output is written to standard # error (stderr). -WARN_LOGFILE = +WARN_LOGFILE = #--------------------------------------------------------------------------- # Configuration options related to the input files @@ -807,7 +807,7 @@ RECURSIVE = YES # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = +EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded @@ -823,7 +823,7 @@ EXCLUDE_SYMLINKS = NO # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names # (namespaces, classes, functions, etc.) that should be excluded from the @@ -834,13 +834,13 @@ EXCLUDE_PATTERNS = # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* -EXCLUDE_SYMBOLS = +EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or directories # that contain example code fragments that are included (see the \include # command). -EXAMPLE_PATH = +EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and @@ -860,7 +860,7 @@ EXAMPLE_RECURSIVE = NO # that contain images that are to be included in the documentation (see the # \image command). -IMAGE_PATH = +IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program @@ -877,7 +877,7 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. -INPUT_FILTER = +INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern # basis. Doxygen will compare the file name with each pattern and apply the @@ -886,7 +886,7 @@ INPUT_FILTER = # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. -FILTER_PATTERNS = +FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER ) will also be used to filter the input files that are used for @@ -901,14 +901,14 @@ FILTER_SOURCE_FILES = NO # *.ext= (so without naming a filter). # This tag requires that the tag FILTER_SOURCE_FILES is set to YES. -FILTER_SOURCE_PATTERNS = +FILTER_SOURCE_PATTERNS = # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub # and want to reuse the introduction page also for the doxygen output. -USE_MDFILE_AS_MAINPAGE = +USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- # Configuration options related to source browsing @@ -1013,7 +1013,7 @@ CLANG_ASSISTED_PARSING = NO # specified with INPUT and INCLUDE_PATH. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. -CLANG_OPTIONS = +CLANG_OPTIONS = #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index @@ -1039,7 +1039,7 @@ COLS_IN_ALPHA_INDEX = 5 # while generating the index headers. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the HTML output @@ -1083,7 +1083,7 @@ HTML_FILE_EXTENSION = .html # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_HEADER = +HTML_HEADER = # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each # generated HTML page. If the tag is left blank doxygen will generate a standard @@ -1093,7 +1093,7 @@ HTML_HEADER = # that doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_FOOTER = +HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of @@ -1105,7 +1105,7 @@ HTML_FOOTER = # obsolete. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_STYLESHEET = +HTML_STYLESHEET = # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined # cascading style sheets that are included after the standard style sheets @@ -1118,7 +1118,7 @@ HTML_STYLESHEET = # list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_STYLESHEET = +HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -1128,7 +1128,7 @@ HTML_EXTRA_STYLESHEET = # files will be copied as-is; there are no commands or markers available. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_FILES = +HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the stylesheet and background images according to @@ -1256,7 +1256,7 @@ GENERATE_HTMLHELP = NO # written to the html output directory. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -CHM_FILE = +CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path # including file name) of the HTML help compiler ( hhc.exe). If non-empty @@ -1264,7 +1264,7 @@ CHM_FILE = # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -HHC_LOCATION = +HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated ( # YES) or that it should be included in the master .chm file ( NO). @@ -1277,7 +1277,7 @@ GENERATE_CHI = NO # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -CHM_INDEX_ENCODING = +CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( # YES) or a normal table of contents ( NO) in the .chm file. Furthermore it @@ -1308,7 +1308,7 @@ GENERATE_QHP = NO # the HTML output folder. # This tag requires that the tag GENERATE_QHP is set to YES. -QCH_FILE = +QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace @@ -1333,7 +1333,7 @@ QHP_VIRTUAL_FOLDER = doc # filters). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_CUST_FILTER_NAME = +QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom @@ -1341,21 +1341,21 @@ QHP_CUST_FILTER_NAME = # filters). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_CUST_FILTER_ATTRS = +QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_SECT_FILTER_ATTRS = +QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location of Qt's # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the # generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. -QHG_LOCATION = +QHG_LOCATION = # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be # generated, together with the HTML files, they form an Eclipse help plugin. To @@ -1488,7 +1488,7 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_EXTENSIONS = +MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site @@ -1496,7 +1496,7 @@ MATHJAX_EXTENSIONS = # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_CODEFILE = +MATHJAX_CODEFILE = # When the SEARCHENGINE tag is enabled doxygen will generate a search box for # the HTML output. The underlying search engine uses javascript and DHTML and @@ -1556,7 +1556,7 @@ EXTERNAL_SEARCH = NO # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. -SEARCHENGINE_URL = +SEARCHENGINE_URL = # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed # search data is written to a file for indexing by an external tool. With the @@ -1572,7 +1572,7 @@ SEARCHDATA_FILE = searchdata.xml # projects and redirect the results back to the right project. # This tag requires that the tag SEARCHENGINE is set to YES. -EXTERNAL_SEARCH_ID = +EXTERNAL_SEARCH_ID = # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen # projects other than the one defined by this configuration file, but that are @@ -1582,7 +1582,7 @@ EXTERNAL_SEARCH_ID = # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... # This tag requires that the tag SEARCHENGINE is set to YES. -EXTRA_SEARCH_MAPPINGS = +EXTRA_SEARCH_MAPPINGS = #--------------------------------------------------------------------------- # Configuration options related to the LaTeX output @@ -1643,7 +1643,7 @@ PAPER_TYPE = a4 # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. -EXTRA_PACKAGES = +EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the # generated LaTeX document. The header should contain everything until the first @@ -1659,7 +1659,7 @@ EXTRA_PACKAGES = # HTML_HEADER. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_HEADER = +LATEX_HEADER = # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the # generated LaTeX document. The footer should contain everything after the last @@ -1670,7 +1670,7 @@ LATEX_HEADER = # Note: Only use a user-defined footer if you know what you are doing! # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_FOOTER = +LATEX_FOOTER = # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the LATEX_OUTPUT output @@ -1678,7 +1678,7 @@ LATEX_FOOTER = # markers available. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_EXTRA_FILES = +LATEX_EXTRA_FILES = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will @@ -1778,14 +1778,14 @@ RTF_HYPERLINKS = NO # default style sheet that doxygen normally uses. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is # similar to doxygen's config file. A template extensions file can be generated # using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # Configuration options related to the man page output @@ -1820,7 +1820,7 @@ MAN_EXTENSION = .3 # MAN_EXTENSION with the initial . removed. # This tag requires that the tag GENERATE_MAN is set to YES. -MAN_SUBDIR = +MAN_SUBDIR = # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real @@ -1933,7 +1933,7 @@ PERLMOD_PRETTY = YES # overwrite each other's variables. # This tag requires that the tag GENERATE_PERLMOD is set to YES. -PERLMOD_MAKEVAR_PREFIX = +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor @@ -1974,7 +1974,7 @@ SEARCH_INCLUDES = YES # preprocessor. # This tag requires that the tag SEARCH_INCLUDES is set to YES. -INCLUDE_PATH = +INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the @@ -1982,7 +1982,7 @@ INCLUDE_PATH = # used. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that are # defined before the preprocessor is started (similar to the -D option of e.g. @@ -1992,7 +1992,7 @@ INCLUDE_FILE_PATTERNS = # recursively expanded use the := operator instead of the = operator. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -PREDEFINED = +PREDEFINED = # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this # tag can be used to specify a list of macro names that should be expanded. The @@ -2001,7 +2001,7 @@ PREDEFINED = # definition found in the source code. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will # remove all references to function-like macros that are alone on a line, have @@ -2030,13 +2030,13 @@ SKIP_FUNCTION_MACROS = YES # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create a # tag file that is based on the input files it reads. See section "Linking to # external documentation" for more information about the usage of tag files. -GENERATE_TAGFILE = +GENERATE_TAGFILE = # If the ALLEXTERNALS tag is set to YES all external class will be listed in the # class index. If set to NO only the inherited external classes will be listed. @@ -2084,14 +2084,14 @@ CLASS_DIAGRAMS = YES # the mscgen tool resides. If left empty the tool is assumed to be found in the # default search path. -MSCGEN_PATH = +MSCGEN_PATH = # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. # If left empty dia is assumed to be found in the default search path. -DIA_PATH = +DIA_PATH = # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. @@ -2140,7 +2140,7 @@ DOT_FONTSIZE = 10 # the path where dot can find it using this tag. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTPATH = +DOT_FONTPATH = # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for # each documented class showing the direct and indirect inheritance relations. @@ -2278,26 +2278,26 @@ INTERACTIVE_SVG = NO # found. If left blank, it is assumed the dot tool can be found in the path. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_PATH = +DOT_PATH = # The DOTFILE_DIRS tag can be used to specify one or more directories that # contain dot files that are included in the documentation (see the \dotfile # command). # This tag requires that the tag HAVE_DOT is set to YES. -DOTFILE_DIRS = +DOTFILE_DIRS = # The MSCFILE_DIRS tag can be used to specify one or more directories that # contain msc files that are included in the documentation (see the \mscfile # command). -MSCFILE_DIRS = +MSCFILE_DIRS = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile # command). -DIAFILE_DIRS = +DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the # path where java can find the plantuml.jar file. If left blank, it is assumed @@ -2306,7 +2306,7 @@ DIAFILE_DIRS = # will not generate output for the diagram. # This tag requires that the tag HAVE_DOT is set to YES. -PLANTUML_JAR_PATH = +PLANTUML_JAR_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes -- cgit v1.2.3