From 743e1f02a06187164d55f4208b8e85742abd4498 Mon Sep 17 00:00:00 2001 From: Ameer Date: Tue, 23 Jun 2020 17:37:15 -0400 Subject: cleanup check access, read, and factory GetNextInput funcs. Use size rather than magic number --- src/input_common/gcadapter/gc_adapter.cpp | 169 ++++++++++++++---------------- src/input_common/gcadapter/gc_adapter.h | 8 +- src/input_common/gcadapter/gc_poller.cpp | 74 ++++--------- src/input_common/keyboard.cpp | 1 - 4 files changed, 101 insertions(+), 151 deletions(-) diff --git a/src/input_common/gcadapter/gc_adapter.cpp b/src/input_common/gcadapter/gc_adapter.cpp index 887cde263..9437d628f 100644 --- a/src/input_common/gcadapter/gc_adapter.cpp +++ b/src/input_common/gcadapter/gc_adapter.cpp @@ -21,57 +21,38 @@ Adapter::Adapter() { StartScanThread(); } -GCPadStatus Adapter::CheckStatus(int port, const std::array& adapter_payload) { +GCPadStatus Adapter::GetPadStatus(int port, const std::array& adapter_payload) { GCPadStatus pad = {}; bool get_origin = false; ControllerTypes type = ControllerTypes(adapter_payload[1 + (9 * port)] >> 4); - if (type != ControllerTypes::None) + if (type != ControllerTypes::None) { get_origin = true; + } adapter_controllers_status[port] = type; - if (adapter_controllers_status[port] != ControllerTypes::None) { - u8 b1 = adapter_payload[1 + (9 * port) + 1]; - u8 b2 = adapter_payload[1 + (9 * port) + 2]; + constexpr std::array b1_buttons{ + PAD_BUTTON_A, PAD_BUTTON_B, PAD_BUTTON_X, PAD_BUTTON_Y, + PAD_BUTTON_LEFT, PAD_BUTTON_RIGHT, PAD_BUTTON_DOWN, PAD_BUTTON_UP}; - if (b1 & (1 << 0)) { - pad.button |= PAD_BUTTON_A; - } - if (b1 & (1 << 1)) { - pad.button |= PAD_BUTTON_B; - } - if (b1 & (1 << 2)) { - pad.button |= PAD_BUTTON_X; - } - if (b1 & (1 << 3)) { - pad.button |= PAD_BUTTON_Y; - } + constexpr std::array b2_buttons{PAD_BUTTON_START, PAD_TRIGGER_Z, PAD_TRIGGER_R, + PAD_TRIGGER_L}; - if (b1 & (1 << 4)) { - pad.button |= PAD_BUTTON_LEFT; - } - if (b1 & (1 << 5)) { - pad.button |= PAD_BUTTON_RIGHT; - } - if (b1 & (1 << 6)) { - pad.button |= PAD_BUTTON_DOWN; - } - if (b1 & (1 << 7)) { - pad.button |= PAD_BUTTON_UP; - } + if (adapter_controllers_status[port] != ControllerTypes::None) { + const u8 b1 = adapter_payload[1 + (9 * port) + 1]; + const u8 b2 = adapter_payload[1 + (9 * port) + 2]; - if (b2 & (1 << 0)) { - pad.button |= PAD_BUTTON_START; - } - if (b2 & (1 << 1)) { - pad.button |= PAD_TRIGGER_Z; - } - if (b2 & (1 << 2)) { - pad.button |= PAD_TRIGGER_R; + for (int i = 0; i < b1_buttons.size(); i++) { + if (b1 & (1 << i)) { + pad.button |= b1_buttons[i]; + } } - if (b2 & (1 << 3)) { - pad.button |= PAD_TRIGGER_L; + + for (int j = 0; j < b2_buttons.size(); j++) { + if (b2 & (1 << j)) { + pad.button |= b2_buttons[j]; + } } if (get_origin) { @@ -112,65 +93,65 @@ void Adapter::PadToState(const GCPadStatus& pad, GCState& state) { void Adapter::Read() { LOG_INFO(Input, "GC Adapter Read() thread started"); - int payload_size_in, payload_size; + int payload_size_in, payload_size_copy; std::array adapter_payload; - std::array controller_payload_copy; - std::array pad; + std::array adapter_payload_copy; + std::array pads; while (adapter_thread_running) { libusb_interrupt_transfer(usb_adapter_handle, input_endpoint, adapter_payload.data(), sizeof(adapter_payload), &payload_size_in, 32); - payload_size = 0; + payload_size_copy = 0; { std::lock_guard lk(s_mutex); std::copy(std::begin(adapter_payload), std::end(adapter_payload), - std::begin(controller_payload_copy)); - payload_size = payload_size_in; + std::begin(adapter_payload_copy)); + payload_size_copy = payload_size_in; } - if (payload_size != sizeof(controller_payload_copy) || - controller_payload_copy[0] != LIBUSB_DT_HID) { + if (payload_size_copy != sizeof(adapter_payload_copy) || + adapter_payload_copy[0] != LIBUSB_DT_HID) { // TODO: It might be worthwhile to Shutdown GC Adapter if we encounter errors here - LOG_ERROR(Input, "error reading payload (size: %d, type: %02x)", payload_size, - controller_payload_copy[0]); + LOG_ERROR(Input, "error reading payload (size: %d, type: %02x)", payload_size_copy, + adapter_payload_copy[0]); } else { - for (int port = 0; port < 4; port++) { - pad[port] = CheckStatus(port, controller_payload_copy); + for (int port = 0; port < pads.size(); port++) { + pads[port] = GetPadStatus(port, adapter_payload_copy); } } - for (int port = 0; port < 4; port++) { + for (int port = 0; port < pads.size(); port++) { if (DeviceConnected(port) && configuring) { - if (pad[port].button != PAD_GET_ORIGIN) { - pad_queue[port].Push(pad[port]); + if (pads[port].button != PAD_GET_ORIGIN) { + pad_queue[port].Push(pads[port]); } // Accounting for a threshold here because of some controller variance - if (pad[port].stick_x > pad[port].MAIN_STICK_CENTER_X + pad[port].THRESHOLD || - pad[port].stick_x < pad[port].MAIN_STICK_CENTER_X - pad[port].THRESHOLD) { - pad[port].axis = GCAdapter::PadAxes::StickX; - pad[port].axis_value = pad[port].stick_x; - pad_queue[port].Push(pad[port]); + if (pads[port].stick_x > pads[port].MAIN_STICK_CENTER_X + pads[port].THRESHOLD || + pads[port].stick_x < pads[port].MAIN_STICK_CENTER_X - pads[port].THRESHOLD) { + pads[port].axis = GCAdapter::PadAxes::StickX; + pads[port].axis_value = pads[port].stick_x; + pad_queue[port].Push(pads[port]); } - if (pad[port].stick_y > pad[port].MAIN_STICK_CENTER_Y + pad[port].THRESHOLD || - pad[port].stick_y < pad[port].MAIN_STICK_CENTER_Y - pad[port].THRESHOLD) { - pad[port].axis = GCAdapter::PadAxes::StickY; - pad[port].axis_value = pad[port].stick_y; - pad_queue[port].Push(pad[port]); + if (pads[port].stick_y > pads[port].MAIN_STICK_CENTER_Y + pads[port].THRESHOLD || + pads[port].stick_y < pads[port].MAIN_STICK_CENTER_Y - pads[port].THRESHOLD) { + pads[port].axis = GCAdapter::PadAxes::StickY; + pads[port].axis_value = pads[port].stick_y; + pad_queue[port].Push(pads[port]); } - if (pad[port].substick_x > pad[port].C_STICK_CENTER_X + pad[port].THRESHOLD || - pad[port].substick_x < pad[port].C_STICK_CENTER_X - pad[port].THRESHOLD) { - pad[port].axis = GCAdapter::PadAxes::SubstickX; - pad[port].axis_value = pad[port].substick_x; - pad_queue[port].Push(pad[port]); + if (pads[port].substick_x > pads[port].C_STICK_CENTER_X + pads[port].THRESHOLD || + pads[port].substick_x < pads[port].C_STICK_CENTER_X - pads[port].THRESHOLD) { + pads[port].axis = GCAdapter::PadAxes::SubstickX; + pads[port].axis_value = pads[port].substick_x; + pad_queue[port].Push(pads[port]); } - if (pad[port].substick_y > pad[port].C_STICK_CENTER_Y + pad[port].THRESHOLD || - pad[port].substick_y < pad[port].C_STICK_CENTER_Y - pad[port].THRESHOLD) { - pad[port].axis = GCAdapter::PadAxes::SubstickY; - pad[port].axis_value = pad[port].substick_y; - pad_queue[port].Push(pad[port]); + if (pads[port].substick_y > pads[port].C_STICK_CENTER_Y + pads[port].THRESHOLD || + pads[port].substick_y < pads[port].C_STICK_CENTER_Y - pads[port].THRESHOLD) { + pads[port].axis = GCAdapter::PadAxes::SubstickY; + pads[port].axis_value = pads[port].substick_y; + pad_queue[port].Push(pads[port]); } } - PadToState(pad[port], state[port]); + PadToState(pads[port], state[port]); } std::this_thread::yield(); } @@ -215,11 +196,11 @@ void Adapter::Setup() { libusb_device** devs; // pointer to list of connected usb devices - int cnt = libusb_get_device_list(libusb_ctx, &devs); // get the list of devices + const int cnt = libusb_get_device_list(libusb_ctx, &devs); // get the list of devices for (int i = 0; i < cnt; i++) { if (CheckDeviceAccess(devs[i])) { - // GC Adapter found, registering it + // GC Adapter found and accessible, registering it GetGCEndpoint(devs[i]); break; } @@ -228,10 +209,11 @@ void Adapter::Setup() { bool Adapter::CheckDeviceAccess(libusb_device* device) { libusb_device_descriptor desc; - int ret = libusb_get_device_descriptor(device, &desc); - if (ret) { + const int get_descriptor_error = libusb_get_device_descriptor(device, &desc); + if (get_descriptor_error) { // could not acquire the descriptor, no point in trying to use it. - LOG_ERROR(Input, "libusb_get_device_descriptor failed with error: %d", ret); + LOG_ERROR(Input, "libusb_get_device_descriptor failed with error: %d", + get_descriptor_error); return false; } @@ -239,35 +221,36 @@ bool Adapter::CheckDeviceAccess(libusb_device* device) { // This isn’t the device we are looking for. return false; } - ret = libusb_open(device, &usb_adapter_handle); + const int open_error = libusb_open(device, &usb_adapter_handle); - if (ret == LIBUSB_ERROR_ACCESS) { + if (open_error == LIBUSB_ERROR_ACCESS) { LOG_ERROR(Input, "Yuzu can not gain access to this device: ID %04X:%04X.", desc.idVendor, desc.idProduct); return false; } - if (ret) { - LOG_ERROR(Input, "libusb_open failed to open device with error = %d", ret); + if (open_error) { + LOG_ERROR(Input, "libusb_open failed to open device with error = %d", open_error); return false; } - ret = libusb_kernel_driver_active(usb_adapter_handle, 0); - if (ret == 1) { - ret = libusb_detach_kernel_driver(usb_adapter_handle, 0); - if (ret != 0 && ret != LIBUSB_ERROR_NOT_SUPPORTED) { - LOG_ERROR(Input, "libusb_detach_kernel_driver failed with error = %d", ret); + int kernel_driver_error = libusb_kernel_driver_active(usb_adapter_handle, 0); + if (kernel_driver_error == 1) { + kernel_driver_error = libusb_detach_kernel_driver(usb_adapter_handle, 0); + if (kernel_driver_error != 0 && kernel_driver_error != LIBUSB_ERROR_NOT_SUPPORTED) { + LOG_ERROR(Input, "libusb_detach_kernel_driver failed with error = %d", + kernel_driver_error); } } - if (ret != 0 && ret != LIBUSB_ERROR_NOT_SUPPORTED) { + if (kernel_driver_error && kernel_driver_error != LIBUSB_ERROR_NOT_SUPPORTED) { libusb_close(usb_adapter_handle); usb_adapter_handle = nullptr; return false; } - ret = libusb_claim_interface(usb_adapter_handle, 0); - if (ret) { - LOG_ERROR(Input, "libusb_claim_interface failed with error = %d", ret); + const int interface_claim_error = libusb_claim_interface(usb_adapter_handle, 0); + if (interface_claim_error) { + LOG_ERROR(Input, "libusb_claim_interface failed with error = %d", interface_claim_error); libusb_close(usb_adapter_handle); usb_adapter_handle = nullptr; return false; diff --git a/src/input_common/gcadapter/gc_adapter.h b/src/input_common/gcadapter/gc_adapter.h index 7aed0b480..abfe0d7b3 100644 --- a/src/input_common/gcadapter/gc_adapter.h +++ b/src/input_common/gcadapter/gc_adapter.h @@ -37,6 +37,12 @@ enum PadButton { }; +/// Used to loop through the and assign button in poller +static constexpr std::array PadButtonArray{ + PAD_BUTTON_LEFT, PAD_BUTTON_RIGHT, PAD_BUTTON_DOWN, PAD_BUTTON_UP, + PAD_TRIGGER_Z, PAD_TRIGGER_R, PAD_TRIGGER_L, PAD_BUTTON_A, + PAD_BUTTON_B, PAD_BUTTON_X, PAD_BUTTON_Y, PAD_BUTTON_START}; + enum class PadAxes : u8 { StickX, StickY, @@ -100,7 +106,7 @@ public: const std::array& GetPadState() const; private: - GCPadStatus CheckStatus(int port, const std::array& adapter_payload); + GCPadStatus GetPadStatus(int port, const std::array& adapter_payload); void PadToState(const GCPadStatus& pad, GCState& state); diff --git a/src/input_common/gcadapter/gc_poller.cpp b/src/input_common/gcadapter/gc_poller.cpp index be7c600a2..977261884 100644 --- a/src/input_common/gcadapter/gc_poller.cpp +++ b/src/input_common/gcadapter/gc_poller.cpp @@ -58,8 +58,8 @@ GCButtonFactory::GCButtonFactory(std::shared_ptr adapter_) GCButton::~GCButton() = default; std::unique_ptr GCButtonFactory::Create(const Common::ParamPackage& params) { - int button_id = params.Get("button", 0); - int port = params.Get("port", 0); + const int button_id = params.Get("button", 0); + const int port = params.Get("port", 0); // For Axis buttons, used by the binary sticks. if (params.Has("axis")) { const int axis = params.Get("axis", 0); @@ -86,61 +86,22 @@ std::unique_ptr GCButtonFactory::Create(const Common::Param Common::ParamPackage GCButtonFactory::GetNextInput() { Common::ParamPackage params; GCAdapter::GCPadStatus pad; - for (int i = 0; i < 4; i++) { - while (adapter->GetPadQueue()[i].Pop(pad)) { + auto& queue = adapter->GetPadQueue(); + for (int port = 0; port < queue.size(); port++) { + while (queue[port].Pop(pad)) { // This while loop will break on the earliest detected button params.Set("engine", "gcpad"); - params.Set("port", i); + params.Set("port", port); // I was debating whether to keep these verbose for ease of reading // or to use a while loop shifting the bits to test and set the value. - if (pad.button & GCAdapter::PAD_BUTTON_A) { - params.Set("button", GCAdapter::PAD_BUTTON_A); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_B) { - params.Set("button", GCAdapter::PAD_BUTTON_B); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_X) { - params.Set("button", GCAdapter::PAD_BUTTON_X); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_Y) { - params.Set("button", GCAdapter::PAD_BUTTON_Y); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_DOWN) { - params.Set("button", GCAdapter::PAD_BUTTON_DOWN); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_LEFT) { - params.Set("button", GCAdapter::PAD_BUTTON_LEFT); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_RIGHT) { - params.Set("button", GCAdapter::PAD_BUTTON_RIGHT); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_UP) { - params.Set("button", GCAdapter::PAD_BUTTON_UP); - break; - } - if (pad.button & GCAdapter::PAD_TRIGGER_L) { - params.Set("button", GCAdapter::PAD_TRIGGER_L); - break; - } - if (pad.button & GCAdapter::PAD_TRIGGER_R) { - params.Set("button", GCAdapter::PAD_TRIGGER_R); - break; - } - if (pad.button & GCAdapter::PAD_TRIGGER_Z) { - params.Set("button", GCAdapter::PAD_TRIGGER_Z); - break; - } - if (pad.button & GCAdapter::PAD_BUTTON_START) { - params.Set("button", GCAdapter::PAD_BUTTON_START); - break; + + for (auto button : GCAdapter::PadButtonArray) { + if (pad.button & button) { + params.Set("button", button); + break; + } } + // For Axis button implementation if (pad.axis != GCAdapter::PadAxes::Undefined) { params.Set("axis", static_cast(pad.axis)); @@ -265,8 +226,9 @@ void GCAnalogFactory::EndConfiguration() { Common::ParamPackage GCAnalogFactory::GetNextInput() { GCAdapter::GCPadStatus pad; - for (int i = 0; i < 4; i++) { - while (adapter->GetPadQueue()[i].Pop(pad)) { + auto& queue = adapter->GetPadQueue(); + for (int port = 0; port < queue.size(); port++) { + while (queue[port].Pop(pad)) { if (pad.axis == GCAdapter::PadAxes::Undefined || std::abs((pad.axis_value - 128.0f) / 128.0f) < 0.1) { continue; @@ -276,8 +238,8 @@ Common::ParamPackage GCAnalogFactory::GetNextInput() { const u8 axis = static_cast(pad.axis); if (analog_x_axis == -1) { analog_x_axis = axis; - controller_number = i; - } else if (analog_y_axis == -1 && analog_x_axis != axis && controller_number == i) { + controller_number = port; + } else if (analog_y_axis == -1 && analog_x_axis != axis && controller_number == port) { analog_y_axis = axis; } } diff --git a/src/input_common/keyboard.cpp b/src/input_common/keyboard.cpp index 9138a7563..eb6c3112b 100644 --- a/src/input_common/keyboard.cpp +++ b/src/input_common/keyboard.cpp @@ -51,7 +51,6 @@ public: for (const KeyButtonPair& pair : list) { if (pair.key_code == key_code) { pair.key_button->status.store(pressed); - break; } } } -- cgit v1.2.3