diff options
Diffstat (limited to '')
-rw-r--r-- | src/video_core/shader/shader_jit_x64.cpp | 122 | ||||
-rw-r--r-- | src/video_core/shader/shader_jit_x64.h | 32 |
2 files changed, 119 insertions, 35 deletions
diff --git a/src/video_core/shader/shader_jit_x64.cpp b/src/video_core/shader/shader_jit_x64.cpp index d74b58d84..c798992ec 100644 --- a/src/video_core/shader/shader_jit_x64.cpp +++ b/src/video_core/shader/shader_jit_x64.cpp @@ -138,6 +138,15 @@ static const u8 NO_SRC_REG_SWIZZLE = 0x1b; static const u8 NO_DEST_REG_MASK = 0xf; /** + * Get the vertex shader instruction for a given offset in the current shader program + * @param offset Offset in the current shader program of the instruction + * @return Instruction at the specified offset + */ +static Instruction GetVertexShaderInstruction(size_t offset) { + return { g_state.vs.program_code[offset] }; +} + +/** * Loads and swizzles a source register into the specified XMM register. * @param instr VS instruction, used for determining how to load the source register * @param src_num Number indicating which source register to load (1 = src1, 2 = src2, 3 = src3) @@ -564,10 +573,23 @@ void JitCompiler::Compile_END(Instruction instr) { } void JitCompiler::Compile_CALL(Instruction instr) { - unsigned offset = instr.flow_control.dest_offset; - while (offset < (instr.flow_control.dest_offset + instr.flow_control.num_instructions)) { - Compile_NextInstr(&offset); - } + // Need to advance the return address past the proceeding instructions, this is the number of bytes to skip + constexpr unsigned SKIP = 21; + const uintptr_t start = reinterpret_cast<uintptr_t>(GetCodePtr()); + + // Push return address - not using CALL because we also want to push the offset of the return before jumping + MOV(64, R(RAX), ImmPtr(GetCodePtr() + SKIP)); + PUSH(RAX); + + // Push offset of the return + PUSH(32, Imm32(instr.flow_control.dest_offset + instr.flow_control.num_instructions)); + + // Jump + FixupBranch b = J(true); + fixup_branches.push_back({ b, instr.flow_control.dest_offset }); + + // Make sure that if the above code changes, SKIP gets updated + ASSERT(reinterpret_cast<uintptr_t>(GetCodePtr()) - start == SKIP); } void JitCompiler::Compile_CALLC(Instruction instr) { @@ -645,8 +667,8 @@ void JitCompiler::Compile_MAD(Instruction instr) { } void JitCompiler::Compile_IF(Instruction instr) { - ASSERT_MSG(instr.flow_control.dest_offset > *offset_ptr, "Backwards if-statements (%d -> %d) not supported", - *offset_ptr, instr.flow_control.dest_offset.Value()); + ASSERT_MSG(instr.flow_control.dest_offset > last_program_counter, "Backwards if-statements (%d -> %d) not supported", + last_program_counter, instr.flow_control.dest_offset.Value()); // Evaluate the "IF" condition if (instr.opcode.Value() == OpCode::Id::IFU) { @@ -677,8 +699,8 @@ void JitCompiler::Compile_IF(Instruction instr) { } void JitCompiler::Compile_LOOP(Instruction instr) { - ASSERT_MSG(instr.flow_control.dest_offset > *offset_ptr, "Backwards loops (%d -> %d) not supported", - *offset_ptr, instr.flow_control.dest_offset.Value()); + ASSERT_MSG(instr.flow_control.dest_offset > last_program_counter, "Backwards loops (%d -> %d) not supported", + last_program_counter, instr.flow_control.dest_offset.Value()); ASSERT_MSG(!looping, "Nested loops not supported"); looping = true; @@ -706,9 +728,6 @@ void JitCompiler::Compile_LOOP(Instruction instr) { } void JitCompiler::Compile_JMP(Instruction instr) { - ASSERT_MSG(instr.flow_control.dest_offset > *offset_ptr, "Backwards jumps (%d -> %d) not supported", - *offset_ptr, instr.flow_control.dest_offset.Value()); - if (instr.opcode.Value() == OpCode::Id::JMPC) Compile_EvaluateCondition(instr); else if (instr.opcode.Value() == OpCode::Id::JMPU) @@ -718,31 +737,42 @@ void JitCompiler::Compile_JMP(Instruction instr) { bool inverted_condition = (instr.opcode.Value() == OpCode::Id::JMPU) && (instr.flow_control.num_instructions & 1); - FixupBranch b = J_CC(inverted_condition ? CC_Z : CC_NZ, true); - - Compile_Block(instr.flow_control.dest_offset); - SetJumpTarget(b); + FixupBranch b = J_CC(inverted_condition ? CC_Z : CC_NZ, true); + fixup_branches.push_back({ b, instr.flow_control.dest_offset }); } void JitCompiler::Compile_Block(unsigned end) { - // Save current offset pointer - unsigned* prev_offset_ptr = offset_ptr; - unsigned offset = *prev_offset_ptr; + while (program_counter < end) { + Compile_NextInstr(); + } +} - while (offset < end) - Compile_NextInstr(&offset); +void JitCompiler::Compile_Return() { + // Peek return offset on the stack and check if we're at that offset + MOV(64, R(RAX), MDisp(RSP, 0)); + CMP(32, R(RAX), Imm32(program_counter)); - // Restore current offset pointer - offset_ptr = prev_offset_ptr; - *offset_ptr = offset; + // If so, jump back to before CALL + FixupBranch b = J_CC(CC_NZ, true); + ADD(64, R(RSP), Imm32(8)); // Ignore return offset that's on the stack + POP(RAX); // Pop off return address + JMPptr(R(RAX)); + SetJumpTarget(b); } -void JitCompiler::Compile_NextInstr(unsigned* offset) { - offset_ptr = offset; +void JitCompiler::Compile_NextInstr() { + last_program_counter = program_counter; + + auto search = return_offsets.find(program_counter); + if (search != return_offsets.end()) { + Compile_Return(); + } + + ASSERT_MSG(code_ptr[program_counter] == nullptr, "Tried to compile already compiled shader location!"); + code_ptr[program_counter] = GetCodePtr(); - Instruction instr; - std::memcpy(&instr, &g_state.vs.program_code[(*offset_ptr)++], sizeof(Instruction)); + Instruction instr = GetVertexShaderInstruction(program_counter++); OpCode::Id opcode = instr.opcode.Value(); auto instr_func = instr_table[static_cast<unsigned>(opcode)]; @@ -757,9 +787,24 @@ void JitCompiler::Compile_NextInstr(unsigned* offset) { } } +void JitCompiler::FindReturnOffsets() { + return_offsets.clear(); + + for (size_t offset = 0; offset < g_state.vs.program_code.size(); ++offset) { + Instruction instr = GetVertexShaderInstruction(offset); + + switch (instr.opcode.Value()) { + case OpCode::Id::CALL: + case OpCode::Id::CALLC: + case OpCode::Id::CALLU: + return_offsets.insert(instr.flow_control.dest_offset + instr.flow_control.num_instructions); + break; + } + } +} + CompiledShader* JitCompiler::Compile() { const u8* start = GetCodePtr(); - unsigned offset = g_state.regs.vs.main_offset; // The stack pointer is 8 modulo 16 at the entry of a procedure ABI_PushRegistersAndAdjustStack(ABI_ALL_CALLEE_SAVED, 8); @@ -782,10 +827,27 @@ CompiledShader* JitCompiler::Compile() { MOV(PTRBITS, R(RAX), ImmPtr(&neg)); MOVAPS(NEGBIT, MatR(RAX)); + // Find all `CALL` instructions and identify return locations + FindReturnOffsets(); + + // Reset flow control state + last_program_counter = 0; + program_counter = 0; looping = false; + code_ptr.fill(nullptr); + fixup_branches.clear(); + + // Jump to start of the shader program + if (g_state.regs.vs.main_offset != 0) { + fixup_branches.push_back({ J(true), g_state.regs.vs.main_offset }); + } + + // Compile entire program + Compile_Block(static_cast<unsigned>(g_state.vs.program_code.size())); - while (offset < g_state.vs.program_code.size()) { - Compile_NextInstr(&offset); + // Set the target for any incomplete branches now that the entire shader program has been emitted + for (const auto& branch : fixup_branches) { + SetJumpTarget(branch.first, code_ptr[branch.second]); } return (CompiledShader*)start; diff --git a/src/video_core/shader/shader_jit_x64.h b/src/video_core/shader/shader_jit_x64.h index 5357c964b..d6f03892d 100644 --- a/src/video_core/shader/shader_jit_x64.h +++ b/src/video_core/shader/shader_jit_x64.h @@ -4,6 +4,9 @@ #pragma once +#include <set> +#include <utility> + #include <nihstro/shader_bytecode.h> #include "common/x64/emitter.h" @@ -66,8 +69,9 @@ public: void Compile_MAD(Instruction instr); private: + void Compile_Block(unsigned end); - void Compile_NextInstr(unsigned* offset); + void Compile_NextInstr(); void Compile_SwizzleSrc(Instruction instr, unsigned src_num, SourceRegister src_reg, Gen::X64Reg dest); void Compile_DestEnable(Instruction instr, Gen::X64Reg dest); @@ -81,13 +85,31 @@ private: void Compile_EvaluateCondition(Instruction instr); void Compile_UniformCondition(Instruction instr); + /** + * Emits the code to conditionally return from a subroutine envoked by the `CALL` instruction. + */ + void Compile_Return(); + BitSet32 PersistentCallerSavedRegs(); - /// Pointer to the variable that stores the current Pica code offset. Used to handle nested code blocks. - unsigned* offset_ptr = nullptr; + /** + * Analyzes the entire shader program for `CALL` instructions before emitting any code, + * identifying the locations where a return needs to be inserted. + */ + void FindReturnOffsets(); + + /// Mapping of Pica VS instructions to pointers in the emitted code + std::array<const u8*, 1024> code_ptr; + + /// Offsets in code where a return needs to be inserted + std::set<unsigned> return_offsets; + + unsigned last_program_counter; ///< Offset of the most recent instruction decoded + unsigned program_counter; ///< Offset of the next instruction to decode + bool looping = false; ///< True if compiling a loop, used to check for nested loops - /// Set to true if currently in a loop, used to check for the existence of nested loops - bool looping = false; + /// Branches that need to be fixed up once the entire shader program is compiled + std::vector<std::pair<Gen::FixupBranch, unsigned>> fixup_branches; }; } // Shader |