summaryrefslogtreecommitdiffstats
path: root/src/core/arm
diff options
context:
space:
mode:
Diffstat (limited to 'src/core/arm')
-rw-r--r--src/core/arm/dyncom/arm_dyncom_interpreter.cpp8
-rw-r--r--src/core/arm/dyncom/arm_dyncom_run.h41
-rw-r--r--src/core/arm/dyncom/arm_dyncom_thumb.cpp2
-rw-r--r--src/core/arm/dyncom/arm_dyncom_thumb.h4
-rw-r--r--src/core/arm/skyeye_common/skyeye_defs.h25
5 files changed, 30 insertions, 50 deletions
diff --git a/src/core/arm/dyncom/arm_dyncom_interpreter.cpp b/src/core/arm/dyncom/arm_dyncom_interpreter.cpp
index 65fe8a055..fde11e4ff 100644
--- a/src/core/arm/dyncom/arm_dyncom_interpreter.cpp
+++ b/src/core/arm/dyncom/arm_dyncom_interpreter.cpp
@@ -3557,7 +3557,7 @@ enum {
FETCH_FAILURE
};
-static tdstate decode_thumb_instr(ARMul_State* cpu, uint32_t inst, addr_t addr, uint32_t* arm_inst, uint32_t* inst_size, ARM_INST_PTR* ptr_inst_base){
+static tdstate decode_thumb_instr(ARMul_State* cpu, u32 inst, u32 addr, u32* arm_inst, u32* inst_size, ARM_INST_PTR* ptr_inst_base) {
// Check if in Thumb mode
tdstate ret = thumb_translate (addr, inst, arm_inst, inst_size);
if(ret == t_branch){
@@ -3620,7 +3620,7 @@ typedef struct instruction_set_encoding_item ISEITEM;
extern const ISEITEM arm_instruction[];
-static int InterpreterTranslate(ARMul_State* cpu, int& bb_start, addr_t addr) {
+static int InterpreterTranslate(ARMul_State* cpu, int& bb_start, u32 addr) {
Common::Profiling::ScopeTimer timer_decode(profile_decode);
// Decode instruction, get index
@@ -3638,8 +3638,8 @@ static int InterpreterTranslate(ARMul_State* cpu, int& bb_start, addr_t addr) {
if (cpu->TFlag)
thumb = THUMB;
- addr_t phys_addr = addr;
- addr_t pc_start = cpu->Reg[15];
+ u32 phys_addr = addr;
+ u32 pc_start = cpu->Reg[15];
while(ret == NON_BRANCH) {
inst = Memory::Read32(phys_addr & 0xFFFFFFFC);
diff --git a/src/core/arm/dyncom/arm_dyncom_run.h b/src/core/arm/dyncom/arm_dyncom_run.h
index e17420497..85774c565 100644
--- a/src/core/arm/dyncom/arm_dyncom_run.h
+++ b/src/core/arm/dyncom/arm_dyncom_run.h
@@ -22,31 +22,36 @@
void switch_mode(ARMul_State* core, uint32_t mode);
-/* FIXME, we temporarily think thumb instruction is always 16 bit */
+// Note that for the 3DS, a Thumb instruction will only ever be
+// two bytes in size. Thus we don't need to worry about ThumbEE
+// or Thumb-2 where instructions can be 4 bytes in length.
static inline u32 GET_INST_SIZE(ARMul_State* core) {
return core->TFlag? 2 : 4;
}
/**
-* @brief Read R15 and forced R15 to wold align, used address calculation
-*
-* @param core
-* @param Rn
-*
-* @return
-*/
-static inline addr_t CHECK_READ_REG15_WA(ARMul_State* core, int Rn) {
- return (Rn == 15)? ((core->Reg[15] & ~0x3) + GET_INST_SIZE(core) * 2) : core->Reg[Rn];
+ * Checks if the PC is being read, and if so, word-aligns it.
+ * Used with address calculations.
+ *
+ * @param core The ARM CPU state instance.
+ * @param Rn The register being read.
+ *
+ * @return If the PC is being read, then the word-aligned PC value is returned.
+ * If the PC is not being read, then the value stored in the register is returned.
+ */
+static inline u32 CHECK_READ_REG15_WA(ARMul_State* core, int Rn) {
+ return (Rn == 15) ? ((core->Reg[15] & ~0x3) + GET_INST_SIZE(core) * 2) : core->Reg[Rn];
}
/**
-* @brief Read R15, used to data processing with pc
-*
-* @param core
-* @param Rn
-*
-* @return
-*/
+ * Reads the PC. Used for data processing operations that use the PC.
+ *
+ * @param core The ARM CPU state instance.
+ * @param Rn The register being read.
+ *
+ * @return If the PC is being read, then the incremented PC value is returned.
+ * If the PC is not being read, then the values stored in the register is returned.
+ */
static inline u32 CHECK_READ_REG15(ARMul_State* core, int Rn) {
- return (Rn == 15)? ((core->Reg[15] & ~0x1) + GET_INST_SIZE(core) * 2) : core->Reg[Rn];
+ return (Rn == 15) ? ((core->Reg[15] & ~0x1) + GET_INST_SIZE(core) * 2) : core->Reg[Rn];
}
diff --git a/src/core/arm/dyncom/arm_dyncom_thumb.cpp b/src/core/arm/dyncom/arm_dyncom_thumb.cpp
index e30d515fb..bfb45f104 100644
--- a/src/core/arm/dyncom/arm_dyncom_thumb.cpp
+++ b/src/core/arm/dyncom/arm_dyncom_thumb.cpp
@@ -13,7 +13,7 @@
// with the following Thumb instruction held in the high 16-bits. Passing in two Thumb instructions
// allows easier simulation of the special dual BL instruction.
-tdstate thumb_translate(addr_t addr, uint32_t instr, uint32_t* ainstr, uint32_t* inst_size) {
+tdstate thumb_translate(u32 addr, u32 instr, u32* ainstr, u32* inst_size) {
tdstate valid = t_uninitialized;
ARMword tinstr = instr;
diff --git a/src/core/arm/dyncom/arm_dyncom_thumb.h b/src/core/arm/dyncom/arm_dyncom_thumb.h
index a1785abb8..8394ff156 100644
--- a/src/core/arm/dyncom/arm_dyncom_thumb.h
+++ b/src/core/arm/dyncom/arm_dyncom_thumb.h
@@ -35,9 +35,9 @@ enum tdstate {
t_uninitialized,
};
-tdstate thumb_translate(addr_t addr, u32 instr, u32* ainstr, u32* inst_size);
+tdstate thumb_translate(u32 addr, u32 instr, u32* ainstr, u32* inst_size);
-static inline u32 get_thumb_instr(u32 instr, addr_t pc) {
+static inline u32 get_thumb_instr(u32 instr, u32 pc) {
u32 tinstr;
if ((pc & 0x3) != 0)
tinstr = instr >> 16;
diff --git a/src/core/arm/skyeye_common/skyeye_defs.h b/src/core/arm/skyeye_common/skyeye_defs.h
index edf6097e0..94b02459d 100644
--- a/src/core/arm/skyeye_common/skyeye_defs.h
+++ b/src/core/arm/skyeye_common/skyeye_defs.h
@@ -11,28 +11,3 @@ struct cpu_config_t
u32 cpu_mask; // cpu_val's mask.
u32 cachetype; // CPU cache type
};
-
-enum {
- // No exception
- No_exp = 0,
- // Memory allocation exception
- Malloc_exp,
- // File open exception
- File_open_exp,
- // DLL open exception
- Dll_open_exp,
- // Invalid argument exception
- Invarg_exp,
- // Invalid module exception
- Invmod_exp,
- // wrong format exception for config file parsing
- Conf_format_exp,
- // some reference excess the predefiend range. Such as the index out of array range
- Excess_range_exp,
- // Can not find the desirable result
- Not_found_exp,
- // Unknown exception
- Unknown_exp
-};
-
-typedef u32 addr_t;