From b0eb07b2ad3cb9f8c628b3419d4b389b27ee5a3d Mon Sep 17 00:00:00 2001
From: krakenrf <78108016+krakenrf@users.noreply.github.com>
Date: Wed, 14 Sep 2022 02:43:52 +1200
Subject: Updated 07. KrakenSDR Troubleshooting (markdown)

---
 07.-KrakenSDR-Troubleshooting.md | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/07.-KrakenSDR-Troubleshooting.md b/07.-KrakenSDR-Troubleshooting.md
index 3594dfb..5ba634f 100644
--- a/07.-KrakenSDR-Troubleshooting.md
+++ b/07.-KrakenSDR-Troubleshooting.md
@@ -17,6 +17,11 @@ The second most likely cause is booting the Pi or running the software without t
 
 The third most likely cause is a poor quality USB data cable.
 
+#### The Android App shows no bearings
+Make sure that you have entered the correct IP address of the device the Kraken is running on in the app settings.
+
+Secondly, ensure that you have actually started the DOA logging in the app by pressing the start DOA button, which looks like a thin diagonal arrow. It is the button second from the bottom on the bottom right. Do not get confused with the fat north point arrow button above it, which is for activating turn by turn directions.
+
 ## General Troubleshooting Tips
 
 ### Check Channel Power Levels
-- 
cgit v1.2.3