From 7b36443c72d369707c0fe5dd0aa67d82d8900c82 Mon Sep 17 00:00:00 2001 From: Giovanni Condello Date: Sun, 28 May 2023 18:49:37 +0200 Subject: Add ZTE F2801S (#213) * Add ZTE F2801S * Cleanup table layout --- _ont_xgs/ont-zte-f2801s.md | 272 +++++++++++++++++++++++++++++++++++++++++++++ _ont_xgs/ont-zte.md | 5 + 2 files changed, 277 insertions(+) create mode 100644 _ont_xgs/ont-zte-f2801s.md create mode 100644 _ont_xgs/ont-zte.md (limited to '_ont_xgs') diff --git a/_ont_xgs/ont-zte-f2801s.md b/_ont_xgs/ont-zte-f2801s.md new file mode 100644 index 0000000..5467488 --- /dev/null +++ b/_ont_xgs/ont-zte-f2801s.md @@ -0,0 +1,272 @@ +--- +title: ZTE F2801S +has_children: false +layout: default +parent: ZTE +--- + +# Hardware Specifications +| | | +|--------------|----------------------------------| +| Vendor/Brand | ZTE | +| Model | F2801Sv2 | +| ODM | ✅ | +| CPU | | +| CPU Clock | | +| Chipset | | +| Flash | | +| RAM | | +| System | | +| 10GBaseT | Yes | +| Optics | SC/APC | +| IP address | 192.168.1.1 | +| Web Gui | ✅ user `admin`, password `admin` | +| SSH | | +| Telnet | ✅ [^1] | +| Serial | ✅ | +| Form Factor | ONT | + +{% include image.html file="f2801s/front.jpg" alt="F2801S front plate" caption="F2801S front plate" %} +{% include image.html file="f2801s/internal.jpg" alt="F2801S internal" caption="F2801S internal layout" %} + + +## List of software versions +### HW V2.0 +- V2.0.10P7N1 (OpenFiber) +- V2.0.10P7N2 (OpenFiber) + +## List of partitions + +### HW V2.0 + +| dev | size | erasesize | name | +| ---- | -------- | --------- | ---------------- | +| mtd0 | 08000000 | 00020000 | "whole flash" | +| mtd1 | 00200000 | 00020000 | "u-boot" | +| mtd2 | 00400000 | 00020000 | "others" | +| mtd3 | 00400000 | 00020000 | "parameter tags" | +| mtd4 | 00400000 | 00020000 | "wlan" | +| mtd5 | 00800000 | 00020000 | "usercfg" | +| mtd6 | 00400000 | 00020000 | "middle" | +| mtd7 | 02a00000 | 00020000 | "kernel1" | +| mtd8 | 02a00000 | 00020000 | "kernel2" | +| mtd9 | 029e0000 | 00020000 | "rootfs" | + + +This ONT supports dual boot, as visible from the presence of `kernel1` and `kernel2`, which contain the rootfs. +The boot image can be swapped with the following command: + +```sh +upgradetest switchver X +``` + +Where `X` can be `0/1` based on the image you want to boot. + + +You can also clone the currently running image into other slot using this command: + +```sh +syn_version +``` + +# Use +{% include alert.html content="Commands have been tested on V2 HW rev. on OpenFiber firmwares" alert="Note" icon="svg-info" color="blue" %} + +## Enable Telnet +{% include alert.html content="This is an external script ([ZTE Telnet enabled](https://github.com/douniwan5788/zte_modem_tools)), so use it at your own risk! Credential doesn't survive at reboot!" alert="Note" icon="svg-info" color="blue" %} + +```sh +python3 zte_factroymode.py --user admin --pass admin --ip 192.168.1.1 --port 80 telnet open +``` + +You should get this output and credentials to login over telnet: + +```sh +trying user:"admin" pass:"admin" +reset facTelnetSteps: +reset OK! + +facStep 1: +OK! + +facStep 2: +OK! + +facStep 3: +OK! + +facStep 4: +OK! + +facStep 5: +OK! + +done +Username: 2W3iqFVt +Password: Eqb8X8Qt +``` + +## Enable console redirection + +To see omcidebug messages on Telnet you need to execute this command (just the first time of each connection): + +```sh +redir printf +``` + +# GPON ONU status + +## Get the operational status of the ONU + +To see the connection state use the following command: +``` +gpontest -gstate +``` +`[gpontest] gpon state is [O5]` for O5 state + +## Get information of the OLT vendor + +```sh +sendcmd 132 omcidebug showmedata 131 +``` + +This command will print out the result like this one: + +```sh +################################## +MIB INFO: + ME CLASS: 131 + DB NAME: olt_g, DBHandle: 32 +################################## + +<-----MeID[ 0x0000,0 ], Addr[ 0x19a2b1]-----> + Vendorid:48 57 54 43 + EquipmentID:00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 + Version:31 30 00 00 00 00 00 00 00 00 + 00 00 00 00 + TimeofDay:00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 +--------------------------------------------------------------------- +``` + +## Querying a particular OMCI ME + +```sh +sendcmd 132 omcidebug showmedata ID_MIB (eg. 7 for Firmware version) +``` + +This command will print out a result like this one: + +```sh + +################################## +MIB INFO: + ME CLASS: 7 + DB NAME: soft_image, DBHandle: 14 +################################## + +<-----MeID[ 0x0000,0 ], Addr[ 0x19a011]-----> + Version:V6.0.10N41 + Is committed:01 + Is active:01 + Is valid:01 + +<-----MeID[ 0x0001,1 ], Addr[ 0x19a031]-----> + Version:V6.0.10N39 + Is committed:00 + Is active:00 + Is valid:01 +--------------------------------------------------------------------- +``` + +# GPON/OMCI settings + +## Setting ONU GPON Serial Number + +{% include alert.html content="You have to change S/N and the VID. 2176 is for the VID (first 4 letters of the S/N) and 2177 is for the last 8 digits of the S/N" alert="Note" icon="svg-info" color="blue" %} +```sh +setmac 1 2176 ZTEG +setmac 1 2177 AABBCCDD +``` + +## Setting ONU GPON PLOAM password + +{% include alert.html content="The PLOAM password is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %} +This can be done easily via web ui. If you prefer to do it via the shell use: +```sh +setmac 1 2181 1234567890 +setmac 1 2178 1234567890 +``` + +# Advanced settings + +## Backup ONT Paritions for HW\SW Version Mod + +This step is suggested if you want to replace firmware on your ONT to spoof HW and SW version: + +Needed tools: + +- Linux VM or WSL with Python >3.3 +- [ZTE Telnet enabled](https://github.com/douniwan5788/zte_modem_tools) +- TFTP server + +First step is to login over telnet with `zte_factroymode.py` then execute ALL this command for a full backup: + +**Go to `/tmp` folder to create tmp files** + +```sh +cd /tmp +``` + +**Dump and transfer all mtd ** + +Here 192.168.1.2 is the IP of the machine running the TFTP server, change it as needed + +```sh +cat /dev/mtd1 > u-boot.bin && tftp -l u-boot.bin -r u-boot.bin -p 192.168.1.2 && rm u-boot.bin +cat /dev/mtd2 > others.bin && tftp -l others.bin -r others.bin -p 192.168.1.2 && rm others.bin +cat /dev/mtd3 > parameter_tags.bin && tftp -l parameter_tags.bin -r parameter_tags.bin -p 192.168.1.2 && rm parameter_tags.bin +cat /dev/mtd4 > wlan.bin && tftp -l wlan.bin -r wlan.bin -p 192.168.1.2 && rm wlan.bin +cat /dev/mtd5 > usercfg.bin && tftp -l usercfg.bin -r usercfg.bin -p 192.168.1.2 && rm usercfg.bin +cat /dev/mtd6 > middle.bin && tftp -l middle.bin -r middle.bin -p 192.168.1.2 && rm middle.bin +cat /dev/mtd7 > kernel1.bin && tftp -l kernel1.bin -r kernel1.bin -p 192.168.1.2 && rm kernel1.bin +cat /dev/mtd8 > kernel2.bin && tftp -l kernel2.bin -r kernel2.bin -p 192.168.1.2 && rm kernel2.bin +cat /dev/mtd9 > rootfs.bin && tftp -l rootfs.bin -r rootfs.bin -p 192.168.1.2 && rm rootfs.bin + +``` + +## Change region code + +{% include alert.html content="Be aware that changing the region code may break features such as PPPoE depending on your ISP" alert="Note" icon="svg-info" color="blue" %} + +ZTE has created various region codes that load default values based on the local ISP. This configuration can be changed using this command: + +```sh +upgradetest sfactoryconf X +``` + +Where X is the number of supported regioncode into file `/etc/init.d/regioncode`, here is an example from OpenFiber `V2.0.10P7N2` firmware: + +```sh +# cat /etc/init.d/regioncode +19:Turkey +65:FTOrange +116:Tescali +139:Multilaser +188:HollandKpnSfu +198:Manufacture +2010:Cetin +``` + +# Random notes +- F2801S reads the software version exposed thru gpon_omci deamon from each kernel partition's header, so only way to spoof this parameter is to change the version in the header and recalculate CRC, otherwise bootloader refuse to load image + +# Miscellaneous Links + +- [ZTE Telnet enabled](https://github.com/douniwan5788/zte_modem_tools) + +--- + +[^1]: It may be possible to flash an alternative firmware to avoid running the `zte_factory.py` script each time. +[^2]: Credentials are randomly generated by zte_factroymode.py. They don't survive at reboot \ No newline at end of file diff --git a/_ont_xgs/ont-zte.md b/_ont_xgs/ont-zte.md new file mode 100644 index 0000000..fff9ccb --- /dev/null +++ b/_ont_xgs/ont-zte.md @@ -0,0 +1,5 @@ +--- +title: ZTE +has_children: true +layout: default +--- \ No newline at end of file -- cgit v1.2.3