From 8fad775512d29651a22670e42a752c5e17a69145 Mon Sep 17 00:00:00 2001 From: Simone Bortolin Date: Sun, 18 Sep 2022 14:00:29 +0200 Subject: Update ont-huawei-ma5671a-root.md --- _ont/ont-huawei-ma5671a-root.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to '_ont') diff --git a/_ont/ont-huawei-ma5671a-root.md b/_ont/ont-huawei-ma5671a-root.md index 781a930..6b23e9e 100644 --- a/_ont/ont-huawei-ma5671a-root.md +++ b/_ont/ont-huawei-ma5671a-root.md @@ -28,7 +28,8 @@ pip install pyserial {% include image.html file="ma5671a-root-2.jpg" alt="Molex SFP" caption="Molex SFP" %} {:style="counter-reset:none"} -4. Run this programme and only then connect the GND pin +4. Open Tera Term (or other serial terminal emulator), find the correct serial port of the TTL adapter, change the port on the script on line 7 instead of `COM8`. +5. After this, run the following python script and connect the GND pin: ```py import sys @@ -151,17 +152,16 @@ mtd -e image1 write mtd5.bin image1 ``` 12. change the `committed` variabile with ``` -setenv committed_image 1 -saveenv -printenv committed_image +fw_setenv committed_image 1 +fw_printenv committed_image ``` -13. upload the mtd1 image in `/tmp` whit the command +13. upload the mtd2 image in `/tmp` whit the command ``` scp mtd2.bin root@192.168.1.10:/tmp/ ``` then write the mtd2 file it into the second partition (the 0) with the command: ``` -mtd -e image1 write mtd2.bin image1 +mtd -e image0 write mtd2.bin image0 ``` {% include alert.html content="You could also have done it as a serial, but from here it is much quicker with SSH" alert="Info" icon="svg-info" color="blue" %} -- cgit v1.2.3