From 2efe95e44b6eb704ceaca4d5b93d6b47aaf7229f Mon Sep 17 00:00:00 2001 From: Simone <26844016+simonebortolin@users.noreply.github.com> Date: Mon, 13 Nov 2023 14:23:35 +0000 Subject: update --- _ont/ont-zte-f6005.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to '_ont/ont-zte-f6005.md') diff --git a/_ont/ont-zte-f6005.md b/_ont/ont-zte-f6005.md index 8a06777..1552e80 100644 --- a/_ont/ont-zte-f6005.md +++ b/_ont/ont-zte-f6005.md @@ -45,14 +45,14 @@ The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be acc - V6.0.10P2N18 (OpenFiber) - V6.0.10P2N19 (OpenFiber) -{% include_relative ont-nokia-use.md disableEnablePassword=true %} +{% include_relative ont-nokia-use.md disableEnablePassword=true alertUsage="The following commands need to be executed on GponCLI via a terminal (serial, telnet or SSH). The models currently distributed in Italy by TIM and OpenFiber have no way to enter GponCLI via serial, only via telnet after flashing a custom firmware." %} {% include_relative ont-nokia-useful-command.md %} # Advanced settings -## Unlock serial and TELNET +## Unlock serial to flash another firmware -This ONT is the twin brother of [CIG G97-CP](/ont-cig-g-97cp), if you can find its bootloader (named `CIG_bu.en_V3.09.15`), you can easly repack the firmware and enable its serial port. +This ONT is the twin brother of [CIG G97-CP](/ont-cig-g-97cp), if you can find its bootloader (named `CIG_bu.en_V3.09.15`), you can easly repack the firmware and enable its serial port limited to bootloader. You need a 3.3V SPI programmer (like a modded CH341a) to read and write back the flash. {% include alert.html content="This was tested only on a TIM V6.0.10N20 firmware!" alert="Note" icon="svg-info" color="blue" %} @@ -156,7 +156,7 @@ And flash image with the `upgdimage`. This way both slots will have the same firmware version and will avoid any swap by the OLT. -After these steps, power-cycle ONT and login via TELNET with `root\admin` credentials. From this moment you can simply spoof your ONT with the usual commands. +After these steps, power-cycle ONT and login via Telnet with `root\admin` credentials. From this moment you can simply spoof your ONT with the usual commands. # Known Bugs -- cgit v1.2.3