From afc9d50671f04e1abe796451228fc0076f77f4ef Mon Sep 17 00:00:00 2001 From: Ernesto Castellotti Date: Fri, 26 Aug 2022 19:46:23 +0200 Subject: Fix command to enable serial in/output in Lantiq boot --- _ont/ont-huawei-ma5671a-root.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '_ont/ont-huawei-ma5671a-root.md') diff --git a/_ont/ont-huawei-ma5671a-root.md b/_ont/ont-huawei-ma5671a-root.md index 9bf569d..38ee822 100644 --- a/_ont/ont-huawei-ma5671a-root.md +++ b/_ont/ont-huawei-ma5671a-root.md @@ -66,7 +66,7 @@ GND ----green --------------- pin #10 11. To permanently unlock the bootloader, without having to repeat the previous steps, you must give the following commands: ``` FALCON => setenv bootdelay 5 -FALCON => setenv asc 0 +FALCON => setenv asc0 0 FALCON => setenv preboot "gpio input 105;gpio input 106;gpio input 107;gpio input 108;gpio set 3;gpio set 109;gpio set 110;gpio clear 423;gpio clear 422;gpio clear 325;gpio clear 402;gpio clear 424" FALCON => saveenv ``` -- cgit v1.2.3