diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-fs-com-gpon-onu-stick-with-mac.md | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md index e18ff01..d6479cc 100644 --- a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md +++ b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md @@ -112,6 +112,23 @@ cp /etc/mibs/data_1g_8q.ini /etc/mibs/data_1g_8q.ini.bak sed 's/256 0 HWTC 0000000000000/256 0 YOUR_VENDOR_ID YOUR_ONU_VERSION/' -i /etc/mibs/data_1g_8q.ini ``` +## Enable `data_1g_8q_us1280_ds512.ini` OMCI MIB file for 2500 Mbps profiles +{% include alert.html content="The patch below is only compatible with the firmware version `6BA1896SPLQA42`" alert="Info" icon="svg-info" color="blue" %} +{% include alert.html content="If you need to set the ONU version remember that you will have to do it using the MIB file `/etc/mibs/data_1g_8q_us1280_ds512.ini` instead of `/etc/mibs/data_1g_8q.ini`" alert="Info" icon="svg-info" color="blue" %} + +The MIB file `data_1g_8q_us1280_ds512.ini` is very useful to avoid performance problems in situations where 2500 Mbps speed profiles are used, to enable it you need to run this command: +```sh +fw_setenv mib_file data_1g_8q_us1280_ds512.ini +``` + +## Use custom OMCI MIB file +{% include alert.html content="If you need to set the ONU version remember that you will have to do it using your custom MIB file instead of `/etc/mibs/data_1g_8q.ini`" alert="Info" icon="svg-info" color="blue" %} + +You have to copy the MIB file to /etc/mibs and then run this command: +```sh +fw_setenv mib_file YOUR_MIB_FILENAME +``` + ## Change image software version (ME 7) {% include alert.html content="The patch below is only compatible with the firmware version `6BA1896SPLQA42`" alert="Info" icon="svg-info" color="blue" %} |