diff options
Diffstat (limited to '_ont/ont-technicolor-afm0003.md')
-rw-r--r-- | _ont/ont-technicolor-afm0003.md | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/_ont/ont-technicolor-afm0003.md b/_ont/ont-technicolor-afm0003.md index 7a44ab2..ad5eabe 100644 --- a/_ont/ont-technicolor-afm0003.md +++ b/_ont/ont-technicolor-afm0003.md @@ -68,13 +68,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a This stick supports dual boot. -`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one +`k0` and `r0` respectively contain kernel and firmware of the first image, while `k1` and `r1` contain kernel and firmware of the second one. {% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' speedLan='123456' - customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.' + customSpeedLanAlert='The default firmware does not allow modification of the `LAN_SDS_MODE` parameter. Using modded firmware is needed. Before editing the sync speed make sure your hardware supports it.' lastgoodHs=true flashSwVersion=true %} @@ -110,7 +110,7 @@ tftp> q {% include alert.html content="Only the inactive image can be flashed, change sw_versionX and sw_commit X based on the bank you have flashed" alert="Info" icon="svg-info" color="blue" %} -So mtd4/5 if you are on image1, mtd6/7 if you are on image0. +Flash mtd4/5 if you are on image1, mtd6/7 if you are on image0. The following commands are used to flash a new rootfs to image1 and then boot to it ```sh |