diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-leox-lxt-240g-c1.md | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/_ont/ont-leox-lxt-240g-c1.md b/_ont/ont-leox-lxt-240g-c1.md new file mode 100644 index 0000000..223cdcd --- /dev/null +++ b/_ont/ont-leox-lxt-240g-c1.md @@ -0,0 +1,154 @@ +--- +title: LEOX LXT-240G-C1 +has_children: false +layout: default +parent: LEOX +--- + +# Hardware Specifications + +| | | +| --------------- | ---------------------------------------------------------------------- | +| Vendor/Brand | LEOX | +| Model | LXT-240G-C1 | +| Chipset | Realtek RTL9607C | +| Flash | SPI NAND 256MB | +| RAM | 196MB visible in top (256MB total?) | +| CPU | Formosa MIPS interAptiv (multi) V2.0 | +| CPU Clock | 300MHz (597.60 BogoMIPS) | +| System | Linux 4.4.140 (GCC Realtek MSDK-4.8.5p1 Build 3068) | +| Ethernet ports | 4x1G | +| POTS ports | 2xRJ11 | +| Optics | SC/APC | +| IP address | 192.168.1.1/24 | +| Web Gui | ✅ user `admin`, password `letmein` OR user `user`, password `user` | +| Telnet | ✅ user `leox`, password `leolabs_7` | +| SSH | NO | +| Form Factor | ONT | + +# External Photos + +{% include image.html file="ont-leox-lxt-240g-c1_top.jpg" alt="Leox LXT-240G-C1 Top" caption="Leox LXT-240G-C1 Top" %} +{% include image.html file="ont-leox-lxt-240g-c1_bottom.jpg" alt="Leox LXT-240G-C1 Bottom" caption="Leox LXT-240G-C1 Bottom" %} +{% include image.html file="ont-leox-lxt-240g-c1_pcb.jpg" alt="Leox LXT-240G-C1 PCB" caption="Leox LXT-240G-C1 PCB" %} + +## List of partitions (MTD) + +| dev | size | erasesize | name | +| ----- | -------- | --------- | ---------------- | +| mtd0 | 000c0000 | 00020000 | "boot" | +| mtd1 | 00020000 | 00020000 | "env" | +| mtd2 | 00020000 | 00020000 | "env2" | +| mtd3 | 00040000 | 00020000 | "static_conf" | +| mtd4 | 0f9c0000 | 00020000 | "ubi_device" | +| mtd5 | 00a89000 | 0001f000 | "ubi_Config" | +| mtd6 | 00a0d000 | 0001f000 | "ubi_k0" | +| mtd7 | 01911000 | 0001f000 | "ubi_r0" | +| mtd8 | 00a0d000 | 0001f000 | "ubi_k1" | +| mtd9 | 01911000 | 0001f000 | "ubi_r1" | +| mtd10 | 0081d000 | 0001f000 | "ubi_framework1" | +| mtd11 | 0081d000 | 0001f000 | "ubi_framework2" | +| mtd12 | 02416000 | 0001f000 | "ubi_apps" | + +Only the first 4 partitions with erasesize 0x20000 should be manipulated using mtd devices, the fifth partition `ubi_device` contains the rest of the NAND and is to be manipulated using ubi volumes + +## List of volumes (UBI) + +| dev | size | type | name | +| ------ | --------- | ------- | ---------------- | +| ubi0_0 | 11046912B | dynamic | "ubi_Config" | +| ubi0_1 | 10539008B | dynamic | "ubi_k0" | +| ubi0_2 | 26284032B | dynamic | "ubi_r0" | +| ubi0_3 | 10539008B | dynamic | "ubi_k1" | +| ubi0_4 | 26284032B | dynamic | "ubi_r1" | +| ubi0_5 | 8507392B | dynamic | "ubi_framework1" | +| ubi0_6 | 8507392B | dynamic | "ubi_framework2" | +| ubi0_7 | 37838848B | dynamic | "ubi_apps" | + +To back up a volume, `cat` or `dd` the appropriate `/dev/ubi0_X` device to a file or pipe, to restore a volume, use the `ubiupdatevol` utility (or just do it safely via the WebGUI) + +This ONT supports dual boot. + +Volumes `ubi_k0` and `ubi_r0` respectively contain kernel and rootfs of the first image, while `ubi_k1` and `ubi_r1` contain kernel and rootfs of the second one. + +## List of software versions + +- [V4.1.1L5rc2](https://mega.nz/file/YJkEGCIC#FNdE6Xt6lsFJdOnx3GGGCNi4fpMoN0QFOf5_1VjcGHo){: .btn } md5hash: 53b80abbda413e3ebc87d1730292d2fd +- [V4.1.1L5](https://mega.nz/file/VMtTkLDI#5tZ74mAAqn0PhGa4MtbEliSo4B0VwIo28K_8iV2AzQ0){: .btn } md5hash: 5426cac6eb204ec1b3a8f39bc22d9488, same as rc2 just marked final + +# GPON/OMCI settings + +## Set OMCI mode to customized so versions don't reset +``` +mib set OMCI_OLT_MODE 3 +``` + +## Setting OMCI software version (ME 7) +``` +mib set OMCI_SW_VER1 YOURSWVER +mib set OMCI_SW_VER2 YOURSWVER +``` + +## Setting OMCI vendor ID (ME 256) +``` +flash set PON_VENDOR_ID VEND +``` + +## Setting ONU GPON Serial Number +``` +flash set GPON_SN VEND1234ABCD +``` + +## Setting OMCI hardware version (ME 256) +``` +flash set HW_HWVER YOURHWVER +``` + +## Setting OMCC version (ME 257) +``` +mib set OMCC_VER 0x86 +``` + +## Setting OMCI equipment ID (ME 257) +``` +flash set GPON_ONU_MODEL YOUREQUIPMENTID +``` + +## Setting Product Code (ME 257) +``` +mib set OMCI_VENDOR_PRODUCT_CODE 0x3032 +``` + +## Setting VEIP slot ID (example for 0xe01) +``` +mib set OMCI_VEIP_SLOT_ID 0xe +``` + +# Verification commands for settings changed above (all settings take a reboot to apply) + +## Verify SwVer (ME 7) +``` +omcicli mib get 7 +``` + +## Verify Vendor ID, HwVer, and G984 Serial (ME 256) +``` +omcicli mib get 256 +``` + +## Verify OMCC version, Equipment ID and Product Code (ME 257) +``` +omcicli mib get 257 +``` + +## Verify VEIP customized slot ID (ME 329) +``` +omcicli mib get 329 +``` + +# Advanced settings + +## Setting management IP +``` +mib set LAN_IP_ADDR 192.168.102.1 +```
\ No newline at end of file |