diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-fs-com-gpon-onu-stick-with-mac.md | 59 |
1 files changed, 38 insertions, 21 deletions
diff --git a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md index d98cded..7a2a07f 100644 --- a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md +++ b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md @@ -8,26 +8,29 @@ layout: default # Hardware Specifications -| | | -| ----------- | ---------------------------------------- | -| Vendor | SourcePhotonics | -| Model | SPS-34-24T-HP-TDFO | -| Chipset | Lantiq PEB98035 | -| Manufacter | SourcePhotonics | -| CPU | MIPS 34Kc interAptiv | -| CPU Clock | 400MHz | -| Flash | 16 MB | -| RAM | 64 MB | -| Bootloader | U-Boot 2011.12-lantiq-gpon-1.2.24 | -| System | OpenWRT 14.07_ltq (Kernel 3.10.49) | -| Serial baud | 115200 | -| Load addr | 0x80800000 | -| HSGMII | Yes | -| Optics | SC/APC | -| IP address | 192.168.1.10 | -| Web Gui | | -| SSH | ✅ user `ONTUSER`, password `7sp!lwUBz1` | -| Form Factor | miniONT SFP | +| | | +| ---------------- | ---------------------------------------- | +| Vendor/Brand | FS.com | +| Model | GPON-ONU-34-20BI | +| ODM | ✅ | +| Chipset | Lantiq PEB98035 | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | +| Flash | 16 MB | +| RAM | 64 MB | +| Bootloader | U-Boot 2011.12-lantiq-gpon-1.2.24 | +| System | OpenWRT 14.07_ltq (Kernel 3.10.49) | +| Load addr | 0x80800000 | +| HSGMII | Yes | +| Optics | SC/APC | +| IP address | 192.168.1.10 | +| Web Gui | | +| SSH | ✅ user `ONTUSER`, password `7sp!lwUBz1` | +| Telnet | | +| Serial | ✅ on SFP | +| Serial baud | 115200 | +| Serial encoding | 8-N-1 | +| Form Factor | miniONT SFP | {% include image.html file="ont-fs.jpg" alt="ONT FS.com GPON ONU" caption="ONT FS.com GPON ONU" %} {% include image.html file="ont-fs-box.jpg" alt="ONT FS.com GPON ONU in the box" caption="ONT FS.com GPON ONU in the box" %} @@ -45,7 +48,21 @@ layout: default - {:.text-red-200 } DpOptics D23446 - {:.text-red-200 } Photonics SPS-34-24T-HP-TDFO -# General setting +## Serial + +The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the SFP connector. + +| USB TTL(UART) Adapter | SFP 20pins Molex connector | +| --------------------- | -------------------------- | +| 3.3V | pin #15 and #16 | +| TX | pin #2 | +| RX | pin #7 | +| GND | pin #14 | + + +{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} + +# General Settings and Useful Commands ## Bootloader unlock from shell {% include alert.html content="It is strongly recommended that you unlock the bootloader before making any major changes to the firmware." alert="Warning" icon="svg-warning" color="yellow" %} |