diff options
| -rw-r--r-- | _ont/ont-zte-f601.md | 143 |
1 files changed, 95 insertions, 48 deletions
diff --git a/_ont/ont-zte-f601.md b/_ont/ont-zte-f601.md index 61df6b7..0c1a7ab 100644 --- a/_ont/ont-zte-f601.md +++ b/_ont/ont-zte-f601.md @@ -47,7 +47,9 @@ parent: ZTE ### HW V9.0 - V9.0.10P2N1 (OpenFiber) -## List of partitions (V6.0/V7.0) +## List of partitions + +### HW V6.0 and V7.0 | dev | size | erasesize | name | | ---- | -------- | --------- | ---------------- | @@ -76,42 +78,11 @@ You can also clone currently running image into other slot using this command: syn_version ``` -ZTE has create various region code that loads default valuse based on local ISP, this configuration can be changed using this command: - -```sh -upgradetest sfactoryconf X -``` - -Where X is the number of supported regioncode into file `/etc/init.d/regioncode`, here is an example from TIM `V6.0.10N40` firmware: - -```sh -# cat /etc/init.d/regioncode -2:Lithuania -15:Portugal -17:TelMex -19:Turkey -32:JazzTel -38:Czechia -54:Viettel -59:SeteTec -63:Ais -88:GerNetCologne -97:ItalyTI -104:IndiaRJIO -110:IndiaGTPL -112:BrazilTIM -115:ItalyOpenFiber -116:ItalyTescali -118:PolandINEA -139:MultiLaser -198:Manufacture -``` - -# General Settings and Useful Commands +# Use {% include alert.html content="Commands have been tested on V6/V7 HW rev on TIM and OF firmware" alert="Note" icon="svg-info" color="blue" %} ## Enable Telnet -{% include alert.html content="This is an external script, so use at your own risk! Credential doesn't survive at reboot!" alert="Note" icon="svg-info" color="blue" %} +{% include alert.html content="This is an external script ([ZTE Telnet enabled](https://github.com/douniwan5788/zte_modem_tools)), so use at your own risk! Credential doesn't survive at reboot!" alert="Note" icon="svg-info" color="blue" %} ```sh python3 zte_factroymode.py --user admin --pass admin --ip 192.168.1.1 --port 80 telnet open @@ -144,28 +115,50 @@ Username: 2W3iqFVt Password: Eqb8X8Qt ``` -## Changing the ONT's S/N -{% include alert.html content="You have to change S/N and the VID. 2176 is for the VID (first 4 letters of the S/N) and 2177 is for the last 8 digits" alert="Note" icon="svg-info" color="blue" %} -```sh -setmac 1 2176 ZTEG -setmac 1 2177 AABBCCDD -``` +# GPON ONU status -## Changing the ONT's PLOAM password -{% include alert.html content="The PLOAM password is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %} -This can be done easily via web ui. If you prefer to do it via the shell use: -```sh -setmac 1 2181 1234567890 -setmac 1 2178 1234567890 -``` +## Get the operational status of the ONU -## Checking connection state To see the connection state use the following command: ``` gpontest -gstate ``` `[gpontest] gpon state is [O5]` for O5 state +## Get information of the OLT vendor + +First enable printf on console usin the following command: + +```sh +redir printf +``` + +Then query the OMCI ME Class needed with this command: + +```sh +sendcmd 132 omcidebug showmedata 131 +``` + +This command will print out the result like this one: + +```sh +################################## +MIB INFO: + ME CLASS: 131 + DB NAME: olt_g, DBHandle: 32 +################################## + +<-----MeID[ 0x0000,0 ], Addr[ 0x19a2b1]-----> + Vendorid:48 57 54 43 + EquipmentID:00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 + Version:31 30 00 00 00 00 00 00 00 00 + 00 00 00 00 + TimeofDay:00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 +--------------------------------------------------------------------- +``` + ## Querying a particular OMCI ME First enable printf on console usin the following command: @@ -200,6 +193,60 @@ MIB INFO: --------------------------------------------------------------------- ``` +# GPON/OMCI settings + +## Setting ONU GPON Serial Number + +{% include alert.html content="You have to change S/N and the VID. 2176 is for the VID (first 4 letters of the S/N) and 2177 is for the last 8 digits" alert="Note" icon="svg-info" color="blue" %} +```sh +setmac 1 2176 ZTEG +setmac 1 2177 AABBCCDD +``` + +## Setting ONU GPON PLOAM password + +{% include alert.html content="The PLOAM password is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %} +This can be done easily via web ui. If you prefer to do it via the shell use: +```sh +setmac 1 2181 1234567890 +setmac 1 2178 1234567890 +``` + +# Advanced settings + +## Change region code + +ZTE has create various region code that loads default valuse based on local ISP, this configuration can be changed using this command: + +```sh +upgradetest sfactoryconf X +``` + +Where X is the number of supported regioncode into file `/etc/init.d/regioncode`, here is an example from TIM `V6.0.10N40` firmware: + +```sh +# cat /etc/init.d/regioncode +2:Lithuania +15:Portugal +17:TelMex +19:Turkey +32:JazzTel +38:Czechia +54:Viettel +59:SeteTec +63:Ais +88:GerNetCologne +97:ItalyTI +104:IndiaRJIO +110:IndiaGTPL +112:BrazilTIM +115:ItalyOpenFiber +116:ItalyTescali +118:PolandINEA +139:MultiLaser +198:Manufacture +``` + # Random notes - F601v6/v7 read the software version exposed thru gpon_omci deamon from each kernel partition's header, so only way to spoof this parameter is to change the version in the header and recalculate CRC, otherwise bootloader refuse to load image - F601v6 from TIM line use HWVer `VDF`, this can be changed back to `V6.0` issuing this command on telnet session: `setmac 1 32770 3` |