1 files changed, 6 insertions, 5 deletions

diff --git a/ont-huawei-ma5671a-root.md b/_ont/ont-huawei-ma5671a-root.md
index 14c807c..3161371 100644
--- a/ont-huawei-ma5671a-root.md
+++ b/_ont/ont-huawei-ma5671a-root.md
@@ -1,7 +1,8 @@
 ---
 title: Root Huawei MA5671A
-has_children: true
+has_children: false
 parent: Huawei MA5671A
+layout: default
 ---
 
 1. take the SFP molex and the 4 coloured cables and solder them to the molex according to the following diagram:
@@ -40,19 +41,19 @@ GND ----green --------------- pin #10
 
 7. if you have done everything correctly, you should see something similar to the picture below (if nothing happens, you have obviously done something wrong with cables, molexes, soldering irons, etc., so you will have to start from the beginning again and work out which step you did wrong):
 
-{% include image.html file="ma5671a-root-9.jpg"  alt="serial shell" caption="serial shell" %}
+{% include image.html file="ma5671a-root-9.png"  alt="serial shell" caption="serial shell" %}
 
 8. Remove the short (tweezers or whatever you used), then type 7 and enter. You should see this:
 
-{% include image.html file="ma5671a-root-10.jpg"  alt="serial shell 2" caption="serial shell 2" %}
+{% include image.html file="ma5671a-root-10.png"  alt="serial shell 2" caption="serial shell 2" %}
 
 9. from the Teraterm menu `FILE` → `TRANSFER` → `XMODEM` → `SEND` → `[1224abort.bin]` (which is the third of the files downloaded earlier):
 
-{% include image.html file="ma5671a-root-11.jpg"  alt="1224abort.bin" caption="1224abort.bin" %}
+{% include image.html file="ma5671a-root-11.png"  alt="1224abort.bin" caption="1224abort.bin" %}
 
 10. as soon as the file transfer is complete, you have 2 seconds to press `CTRL+C`, if you have not done so, you can return to the step 6. Otherwise, you should see:
 
-{% include image.html file="ma5671a-root-12.jpg"  alt="falcon shell" caption="falcon shell" %}
+{% include image.html file="ma5671a-root-12.png"  alt="falcon shell" caption="falcon shell" %}
 
 11. To permanently unlock the bootloader, without having to repeat the previous steps, you must give the following commands:
 ```