blob: e18ff0143bffc97d9fb7a97393b1fd25e5afad0b (
plain) (
tree)
|
|
---
title: ONT FS.com GPON ONU Stick with MAC (GPON-ONU-34-20BI)
has_children: false
alias: SourcePhotonics SPS-34-24T-HP-TDFO
layout: default
---
# Hardware Specifications
| | |
| ----------- | ------------------------------------------ |
| Vendor | SourcePhotonics |
| Model | SPS-34-24T-HP-TDFO |
| Chipset | Lantiq PEB98035 |
| CPU | MIPS 34Kc interAptiv |
| CPU Clock | 400MHz |
| Flash | 16 MB |
| RAM | 64 MB |
| Bootloader | U-Boot 2011.12-lantiq-gpon-1.2.24 |
| System | OpenWRT 14.07_ltq (Kernel 3.10.49) |
| Serial baud | 115200 |
| Load addr | 0x80800000 |
| HSGMII | Yes |
| Optics | SC/APC |
| IP address | 192.168.1.10 |
| Web Gui | |
| SSH | ✅ user `ONTUSER`, password `7sp!lwUBz1` |
| Form Factor | miniONT SFP |
{% include image.html file="ont-fs.jpg" alt="ONT FS.com GPON ONU" caption="ONT FS.com GPON ONU" %}
{% include image.html file="ont-fs-box.jpg" alt="ONT FS.com GPON ONU in the box" caption="ONT FS.com GPON ONU in the box" %}
## Possible clones
- SourcePhotonics SPS-34-24T-HP-TDFO
## Firmware is interchangeable with:
- [Huawei MA5671A](/ont-huawei-ma5671a)
- [Nokia G-010S-P](/ont-nokia-g-010s-p)
- [Hilink HL23446](/ont-hilink-hl23446)
- {:.text-red-200 } Dasan H650SFP
- {:.text-red-200 } DpOptics D23446
- {:.text-red-200 } Photonics SPS-34-24T-HP-TDFO
# General setting
## Bootloader unlock from shell
{% include alert.html content="It is strongly recommended that you unlock the bootloader before making any major changes to the firmware." alert="Warning" icon="svg-warning" color="yellow" %}
```sh
fw_setenv bootdelay 5
fw_setenv asc0 0
fw_setenv preboot "gpio input 105;gpio input 106;gpio input 107;gpio input 108;gpio set 3;gpio set 109;gpio set 110;gpio clear 423;gpio clear 422;gpio clear 325;gpio clear 402;gpio clear 424"
```
If you haven't done this and the stick doesn't work due to your changes you can follow the [Huawei MA5671A unlock guide](/ont-huawei-ma5671a-root)
## Setting S/N
```sh
set_serial_number ABCD12345678
```
Or:
```sh
sfp_i2c -i8 -s "ABCD12345678"
```
## Obtain S/N setted
```sh
fw_printenv | grep nSerial
```
Or:
```sh
sfp_i2c -g
```
## Setting PLOAM Password
Software 6BA1896SPLQA41 and before (See [Carlito Firmware](/ont-huawei-ma5671a-carlito))
```sh
fw_setenv nPassword "0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"
```
Software 6BA1896SPLQA42 and after:
```sh
sfp_i2c -i11 -s "0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"
```
## Setting LOID and Checkcode Password
Software 6BA1896SPLQA41 and before (See [Carlito Firmware](/ont-huawei-ma5671a-carlito))
```sh
fw_setenv omci_loid 1234567890
fw_setenv omci_lpwd password01
```
Software 6BA1896SPLQA42 and after:
```sh
sfp_i2c -i9 -s "1234567890"
sfp_i2c -i10 -s "password01"
```
## Setting eqipment id (ME 257)
```sh
sfp_i2c -i6 -s "YOUR_EQUIPMENT_ID"
```
## Setting vendor id (ME 256)
```sh
sfp_i2c -i7 -s "YOUR_VENDOR_ID"
```
## Change ONU hardware version (ME 256)
```sh
cp /etc/mibs/data_1g_8q.ini /etc/mibs/data_1g_8q.ini.bak
sed 's/256 0 HWTC 0000000000000/256 0 YOUR_VENDOR_ID YOUR_ONU_VERSION/' -i /etc/mibs/data_1g_8q.ini
```
## Change image software version (ME 7)
{% include alert.html content="The patch below is only compatible with the firmware version `6BA1896SPLQA42`" alert="Info" icon="svg-info" color="blue" %}
The image version normally couldn't be changed because it was hard-coded into the `/opt/lantiq/bin/omcid` binary,
so you need to then modify the binary with the following hex patch which removes the hardcoded version.
```
< 000084c0: 9a43 931f f760 d840 9b64 f760 d864 1a00 .C...`.@.d.`.d..
< 000084d0: 1acf 6500 1a20 2268 940a 2205 b468 1a00 ..e.. "h.."..h..
---
> 000084c0: 9a43 931f f760 d840 9b64 f760 d864 6500 .C...`.@.d.`.de.
> 000084d0: 6500 6500 1a20 2268 940a 2205 b468 1a00 e.e.. "h.."..h..
```
To make it easier you can use the following base64:
```
QlNESUZGNDA1AAAAAAAAAD4AAAAAAAAA2C8JAAAAAABCWmg5MUFZJlNZYqnvBwAACFBSQWAAAMAA
AAgAQCAAMQwIIwjImgDOdMvi7kinChIMVT3g4EJaaDkxQVkmU1lrJSbUAACFTAjAACAAAAiCAAAI
IABQYAFKQ01INxUgd6Soj2JURm8pUR8XckU4UJBrJSbUQlpoORdyRThQkAAAAAA=
```
Save it as `omcid_patch.base64`, then run:
```
base64 -d omcid_patch.base64 > omcid.bspath
bspatch <your_original_omcid> omcid omcid.bspath
```
Now you have to copy via SCP the modified `omcid` binary in the `/opt/lantiq/bin/omcid` path, restart the stick and after that you can change the image version with the command:
```
fw_setenv image0_version YOUR_IMAGE0_VERSION
fw_setenv image1_version YOUR_IMAGE1_VERSION
```
## Setting Lantiq MAC address
```sh
uci set network.lct.macaddr=00:06:B5:07:D6:04
uci set network.host.macaddr=00:06:B5:07:D8:04
uci commit network.lct.macaddr=00:06:B5:07:D6:04
uci commit network.host.macaddr=00:06:B5:07:D8:04
```
## Setting Lantiq IP address
```sh
fw_setenv ipaddr 192.168.20.60
fw_setenv gatewayip 192.168.20.1
```
## Read all EEPROM
```sh
sfp_i2c -r
```
## Get Firmware version
```sh
strings /opt/lantiq/bin/omcid | grep ^software_Version | awk -F[=,] '{print $2}'
```
## Get Firmware build time
```sh
strings /opt/lantiq/bin/omcid | grep compiled
```
## Setting Onu reboot
```sh
reboot
```
## Reinitialize the EEPROM without rebooting
{% include alert.html content="This will cause you to disconnect from the current ssh session." alert="Warning" icon="svg-warning" color="yellow" %}
```sh
reload_i2c.sh
```
## Reset EEPROM to default values and reinitialize
{% include alert.html content="This command is not reversible, all the EEPROM data will be restored to the factory values!" alert="Warning" icon="svg-warning" color="red" %}
{% include alert.html content="This will cause you to disconnect from the current ssh session." alert="Warning" icon="svg-warning" color="yellow" %}
```sh
sfp_i2c -d yes
reload_i2c.sh
```
## List of software versions
- 6BA1896SPLQA13 (Dec 16 2016)
- 6BA1896SPLQA41
- 6BA1896SPLQA42 (Sep 18 2021)
## List of partitions
When image0 is committed:
| dev | size | erasesize | name |
| ---- | -------- | --------- | ------------- |
| mtd0 | 00040000 | 00010000 | "uboot" |
| mtd1 | 00080000 | 00010000 | "uboot_env" |
| mtd2 | 00740000 | 00010000 | "linux" |
| mtd3 | 0061eedc | 00010000 | "rootfs" |
| mtd4 | 00370000 | 00010000 | "rootfs_data" |
| mtd5 | 00800000 | 00010000 | "image1" |
When image1 is committed:
| dev | size | erasesize | name |
| ---- | -------- | --------- | ------------- |
| mtd0 | 00040000 | 00010000 | "uboot" |
| mtd1 | 00080000 | 00010000 | "uboot_env" |
| mtd2 | 00740000 | 00010000 | "image0" |
| mtd3 | 00800000 | 00010000 | "linux" |
| mtd4 | 006d8077 | 00010000 | "rootfs" |
| mtd5 | 00410000 | 00010000 | "rootfs_data" |
## List of firmwares and files
- [6BA1896SPLQA13 MTD0/U-Boot](https://mega.nz/file/wptjyYiS#Xj3cijX2bN0FexsZr1Wn7iRG0Wy4Z8vX0NyNBd1kBWo){: .btn } md5hash: 992b31a67c644aa68cf7f9caf956b1f9
- [6BA1896SPLQA13 MTD2/Image0](https://mega.nz/file/1kUlUbgQ#ANS9qH6wCggYshsQ3STD6gxmR_3TL-5MXfdCl5s50Nk){: .btn } md5hash: 5d46a9acc3c5ba8710887aa32b82aeb4
- [6BA1896SPLQA42 MTD0/U-Boot](https://mega.nz/file/FkswHbgL#s7-vaH65EPQ2O5vKeD3bU1_RPwzaKPOJdrCWvPQqDvc){: .btn } md5hash: 992b31a67c644aa68cf7f9caf956b1f9
- [6BA1896SPLQA42 MTD2/Image0](https://mega.nz/file/AgshDICC#md1vLN14JBF3iaNoZBqQH_zwALHmEaOk3_rDm1FfOic){: .btn } md5hash: 04533554bb0c8b997697fbc048159002
# Known Bugs
# Miscellaneous Links
- [FS.com](https://www.fs.com/it/products/133619.html)
- [General setting of lantiq](https://forum.fibra.click/d/23881-ma5671a-e-vodafone-25-gbps/64)
- [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300)
|
