summaryrefslogtreecommitdiffstats
path: root/tests/unit (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-06-20Support starting fuse from a block mapTianjie Xu2-1/+6
Factor out a new function from ApplyFromSdcard that installs a package from a local path. Inside this function, we start the fuse and choose the type of data provider depending on the path string. And similar to the existing logic, we treat the package as a block map if the path starts with a '@'. This is part of the effort to install larger than 2GiB packages on ILP32 devices. Bug: 127071893 Test: Build a 32 bit sailfish and create a 3GiB OTA package. Sideload the package, uncrypt and install the package from sdcard. Change-Id: I328ea34fa530731acbce7554bfc3059313ad6ece
2019-05-22Some clean ups to the updaterTianjie Xu1-1/+3
Remove some unnecessary includes or forward declarations. And include the correct headers to build host executables. Bug: 131911365 Test: unit tests pass Change-Id: I62e75f60678159fe24619a4bd386b1416f1a5b5d
2019-05-21Add UpdaterRuntime classTianjie Xu1-3/+9
This class adds a wrapper to the runtime dependent functions. Therefore, the behavior of update on device stays the same, while simulators can have their own implementations. Also change the caller side of the registered updater functions to call these runtime wrappers. Bug: 131911365 Test: unit tests pass, sideload an update on cuttlefish Change-Id: Ib3ab67132991d67fc132f27120e4152439d16ac5
2019-05-21Add misc_writer.Tao Bao1-0/+38
bootloader_message.h currently divides /misc into four segments. The space between 2K and 16K is reserved for vendor use (e.g. bootloader persists flags). This CL adds a vendor tool "misc_writer", to allow writing data to the vendor space in /misc, before getting a dedicated HAL for accessing /misc partition (b/131775112). Targets need to explicitly include the module, then invoke the executable to write data. For example, the following command will write 3-byte data ("0xABCDEF") to offset 4 in vendor space (i.e. 2048 + 4 in /misc). $ /vendor/bin/misc_writer --vendor-space-offset 4 --hex-string 0xABCDEF Bug: 132906936 Test: Run recovery_unit_test on crosshatch. Test: Call the command via init.hardware.rc on crosshatch. Check that the call finishes successfully. Then check the contents written to /misc (`dd bs=1 skip=2048 if=/dev/block/sda2 count=32 | xxd`). Change-Id: I79548fc63fc79b705a0320868690569c3106949f
2019-05-09Add Updater class and remove UpdaterInfoTianjie Xu1-92/+86
The UpdaterInfo class is merely a collection of pointers and POD types. We can replace it with a Updater class that has the ownership of the resources. This also makes this class extensible as we plan to add more functionality in the host simulator. Bug: 131911365 Test: unit tests pass, run an update on cuttlefish and check last_install Change-Id: I07ca5963bbee8ae3cb85ccc184464910aa73d4e4
2019-05-06Track libziparchive API change.Elliott Hughes3-7/+4
Bug: http://b/129068177 Test: treehugger Change-Id: Ie5b2b0cff087f2e9e65a4e77c187e3173357f3ad
2019-05-01Implement FuseBlockDataProviderxunchang3-1/+128
Adds a fuse data provider that parses the metadata from a block map, reads the data from the given ranges of the block device; and provides the data to the fuse. Bug: 127071893 Test: unit tests pass, install a package from block map Change-Id: Ie9925ee9144e98642505b3f5e1a4a186d2b21ed0
2019-04-30install: Return bool for a few check functions.Tao Bao1-27/+27
The results from these functions have boolean semantics. They're returning `int` prior to this CL, with some of them mixing 0 and InstallResult. Note that SetUpNonAbUpdateCommands() was returning INSTALL_CORRUPT / INSTALL_ERROR / 0 prior to this change, but all the callers handle INSTALL_CORRUPT and INSTALL_ERROR the same way. This CL changes them to return bool instead. Test: `mmma -j bootable/recovery` Test: TreeHugger Test: Sideload on taimen. Change-Id: Ic1b5dbf79aaca68b53ab8ea2c8ba3d19f988c571
2019-04-30tests: Merge recovery_component_test into recovery_unit_test.Tao Bao11-0/+4406
Most of the tests in component/ are in fact unit tests. And it doesn't look practically beneficial to distinguish between the two: - They have the same test setup; - We always run both (recovery_unit_test and recovery_component_test) at the same time; - Breaking any of them would be equally bad. This CL merges the tests in recovery_component_test into recovery_unit_test to save the effort to maintain both. Test: Run recovery_unit_test on marlin (via `adb sync data`). Test: `atest recovery_unit_test` Change-Id: I93ff32e7219cd83425a4bcfe5613978a8dd48d75
2019-04-23matches_locale no longer accept empty locales in the png filexunchang1-2/+2
The legacy png files have an empty line in the end. And the recovery used to match any missing locale, e.g. "he" with that line and gets an empty image. Since the empty image is barely useful, we should just error out and fall back to the default locale. This reversed the unit test check added in d17a6885253da909e376ba5ca5084f5281f3557c Bug: 128934634 Test: run locale test with "he" and legacy images, recovery reports error and doesn't crash even without default locale fall back Change-Id: Ibdb7dd0b42348de5e392c834cce67ff02be85c24
2019-03-29Move install to separate modulexunchang2-2/+2
Build libinstall as a shared library. Also drop the dependency on the global variables in common.h. Test: unit tests pass, sideload an OTA Change-Id: I30a20047768ce00689fc0e7851c1c5d712a365a0
2019-03-26Move out the code to parse block map in MemMapxunchang1-0/+61
We will reuse them to implement the fuse provider from block maps. Test: unit tests pass, sideload an OTA Change-Id: Iaa409d19569c4ccc0bb24e12518044fcddb45c69
2019-03-21Move librecovery_ui to a sub-directoryTianjie Xu1-2/+2
This helps to expose librecovery_ui for device specific RecoveryUi. Bug: 76436783 Test: mma, unit tests pass Change-Id: Ic6c3d301d5833e4a592e6ea9d9d059bc4e4919be (cherry picked from commit b5108c372c8b92671ea5ebb4eeff00757fcee187)
2019-03-14Implement FilePackage classxunchang1-0/+117
This is another implementation of the Package class. And we will later need it when reading the package from FUSE. Bug: 127071893 Test: unit tests pass, sideload a file package on sailfish Change-Id: I3de5d5ef60b29c8b73517d6de3498459d7d95975
2018-12-06tests: Temporarily disable ScreenRecoveryUITest tests.Tao Bao1-18/+18
Seems they're racing with SurfaceFlinger in acquiring the display, which occasionally takes down the device and leads to test failures. Bug: 120601844 Test: Run recovery_unit_test on marlin. ScreenRecoveryUITest not triggered. Change-Id: I80b21595247a87fc1f2f95aa68df59f58bdf0257
2018-11-27minui: GRSurface::Create() computes data_size on its own.Tao Bao2-14/+24
GRSurface::Create() doesn't need to rely on caller specifying the buffer size, as it can compute that info based on the given args. This CL also uses `size_t` for all the parameters in GRSurface::Create(). Test: Run recovery_unit_test on marlin. Test: Build and boot into blueline recovery. `Run graphics test`. Test: Build and boot into blueline charger mode. Change-Id: Idec9381079196abf13553a475006fefcfca10950
2018-11-27minui: Fix a wrong arg in calling GRSurface::Create().Tao Bao1-0/+37
This is a bug introduced while refactoring init_display_surface(), in [1]. As a result, user of res_create_multi_display_surface(), which is effectively `charger` right now, crashes due to buffer overrun. This CL fixes the wrong arg and adds a sanity test for res_create_multi_display_surface(). The testdata (battery_scale.png) is copied from system/core/healthd/images/battery_scale.png. [1] commit 44820ac1e31ffa029ab5baa71238a11b6db3e6cc. Bug: 119122296 Test: Run recovery_unit_test on marlin. Test: Build and boot into charger mode on blueline. Verify that `charger` no longer crashes. Change-Id: Ib6d083e1512a9c3c6eb63874d26d22658921d693
2018-11-15switch to using android-base/file.h instead of android-base/test_utils.hMark Salyzyn6-6/+2
Test: compile Bug: 119313545 Change-Id: I664fb32522d01909c603d7b903475c4e9aea9223
2018-11-05ui: Manage loaded resources with smart pointers.Tao Bao1-15/+15
Test: Run recovery_unit_test on marlin. Test: `Run graphics test` on marlin. Change-Id: I8239c3d9fb288f80ee11f615402768ff8ef8ecd0
2018-11-01minui: Add GRSurface::Clone().Tao Bao1-1/+13
Clone() allows duplicating the image that's stored in the GRSurface. Test: Run recovery_unit_test. Change-Id: Ia50d507c6200f2de5f17143775de805247a60e1f
2018-11-01tests: Use FRIEND_TEST in ScreenRecoveryUITest.Tao Bao1-24/+14
Test: Run recovery_unit_test on marlin. Change-Id: I93ec6df8c056b2c485200822f18db0b852595242
2018-10-31minui: Add a protected GRSurface ctor.Tao Bao2-22/+21
This prepares for the removal of the default and copy ctors, by making GRSurface::Create() as the only way to get GRSurface instances. Test: mmma -j bootable/recovery Test: Run recovery_unit_test on marlin. Change-Id: I0c34c3f3967e252deb020907c83acbac8a8f36b9
2018-10-23Add a function to construct the GRSurface in testTianjie Xu1-3/+14
This fixes the build error as the initializer list no longer work without the proper constructor for c++ class. Bug: 74397117 Test: unit tests pass Change-Id: If3ff508a1a01ad5326413dab8e05bacae8a946c8
2018-10-23ui: Add constness to Draw- functions.Tao Bao1-9/+9
These functions take the given GRSurface instances as inputs, which shouldn't be altered. Test: mmma -j bootable/recovery Test: Run recovery_unit_test. Test: `Run graphics test` on marlin. Change-Id: I51bf408e85faae2b497d4f148ab1dec22dd16c93
2018-10-23minui: Move GRSurface into a class.Tao Bao1-0/+32
This CL adds GRSurface::Create() and dtor for managing the allocated memory in GRSurface class. It also adds GRSurface::data() that hides the underlying implementation, with both of const and non-const overloads. This allows `const GRSurface&` to be more useful - previously it only ensured a const member variable of `data`, instead of a read-only buffer it points to. It also marks the parameters in gr_texticon() and gr_blit() as const, as they're incoming source that shouldn't be altered. It corrects the type of gr_draw, which is the sink to be painted on (an earlier attempt was made in [1], but didn't get the full picture correctly). [1] https://android-review.googlesource.com/c/platform/bootable/recovery/+/704757/ Test: mmma -j bootable/recovery Test: recovery_unit_test on marlin Test: Run graphics test on marlin (fbdev). Test: Run graphics test on blueline (drm). Change-Id: I7904df084cd6c08fa04a9da97d01b4b1a6e3a20c
2018-10-23Add function to show localized rescue party menuTianjie Xu1-0/+37
Add a function in screenUI to display the pre-generated graphs for rescue party. If these graphs are not valid, falls back to display the old text strings. Right now we haven't generated the localized graphs yet, so the UI always shows the TextMenu. Bug: 116655889 Test: check rescue party under recovery Change-Id: I0558cb536b659cdc25c8b7946d3a39820935b003
2018-10-13Implement the graphic menusTianjie Xu1-14/+45
As we plan to show localized rescue party dialogs under recovery mode with pre-generated images, it becomes necessary to show the menu headers and items with images. This cl converts the menu class to a interface and derived TextMenu & GraphicMenu classes. And the GraphicMenu uses GRSurfaces* as the menu header and a list of GRSurfaces* as menu items. Moreover, factor out the Draw* functions in the ScreenUI into a separate DrawInterface. Therefore, the Menu class can access these draw functions and use them to implement the DrawHeaders & DrawItems neatly. Bug: 74397117 Test: unittests pass, boot into recovery and check menu Change-Id: I95cee30f3e5eb666eb6fbcdfc873a7260fc177c1
2018-09-13Move the parse of last_install to recovery-persistTianjie Xu1-0/+75
The recovery-persist used to look for the related recovery logs in persist storage, and copy them under /data/misc/recovery during the normal boot process. As we also want to find out the sideload information from last_install, it makes more sense to move the parse & report of non-a/b metrics to recovery-persist. Thus we can avoid the race condition of the file system between the native code and RecoverySystem. Bug: 114278989 Test: unit test pass, check the event buffer for metrics report Change-Id: I32d7b2b831bc74a61a70af9a2f0b8a7e9b3e36ee
2018-08-31applypatch: {Load,Save}FileContents return bool values.Tao Bao1-5/+5
Bug: 110106408 Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: Id72e24dd00eb451565d90cff6e049f4f4b844ea2
2018-08-31applypatch: Refactor applypatch().Tao Bao1-56/+65
applypatch() was initially designed for file-based OTA, operating on individual files. It was later extended to allow patching eMMC targets as a whole, in favor of block-based updates. As we have deprecated file-based OTA since Oreo, part of the code in applypatch() has become obsolete. This CL refactors the related functions, by removing the obsolete logic and focusing on eMMC targets. Since this CL substantially changes applypatch APIs, it adds new functions to avoid unintentionally mixing them together. In particular, it removes `applypatch()`, `applypatch_check()`, `applypatch_flash()`, and adds `PatchPartition()`, `PatchPartitionCheck()`, `FlashPartition()` and `CheckPartition()`. It also replaces the old Edify functions `apply_patch()` and `apply_patch_check()` with `patch_partition()` and `patch_partition_check()` respectively. This CL requires matching changes to OTA generation script (in the same topic). Bug: 110106408 Test: Run recovery_unit_test and recovery_component_test on marlin. Test: `m dist` with non-A/B target. Verify /system/bin/install-recovery.sh on device. Test: `m dist` with non-A/B target using BOARD_USES_FULL_RECOVERY_IMAGE. Verify /system/bin/install-recovery.sh on device. Test: Install an incremental OTA with the new updater and scripts. Change-Id: Ia34a90114bb227f4216eb478c22dc98c8194cb7f
2018-08-20tests: Remove {old,new}.file.Tao Bao1-49/+54
They serve the same purpose as {boot,recovery}.img, except that they're not structured to be imgdiff'd. Remove the two files and replace all the uses with {boot,recovery}.img instead. Bug: 110106408 Test: Run recovery_{unit,component}_test on marlin. Change-Id: I8e71187d5b0c142ad932f33717f6fae364b43abc
2018-08-17updater: Add TransferList class.Tao Bao1-0/+56
This would be the top-level class that represents and holds the info parsed from a transfer list file. Bug: 112151972 Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: I83b54df9d1411542eeeb8ef4a2db167e97f989c3
2018-08-16updater: Add SourceInfo::{ReadAll,DumpBuffer,Overlaps}.Tao Bao1-0/+116
Bug: 112151972 Test: Run recovery_unit_test on marlin. Change-Id: Ica2a7b3c768f5d8ca5d591a9560bca9f8ed847c5
2018-08-14Add the hash_tree_info class in CommandTianjie Xu1-0/+20
Add hash_tree_info to represent the hash tree computation arguments in the transfer commands 'compute_hash_tree'. Also add its parsing code in the Command class. Bug: 25170618 Test: unit tests pass Change-Id: Ie8607968377968e8fb3e58d1af0b8ca315e145be
2018-08-06Add an updater function to compute hash treeTianjie Xu1-0/+1
The new command is part of the transfer.list and allows us to compute the hash tree on non-ab devices. The required arguments for the hash_tree computation are: hash_tree_ranges source_ranges hash_algorithm salt_hex root_hash Bug: 25170618 Test: unit tests pass; run simulator with compute_hash_tree Change-Id: I8ff0d582cc8adabb8a060db7845f38b35b28e62c
2018-07-30recovery: Add ability to interrupt UIJerry Zhang1-1/+38
Normally calling a UI method will block indefinitely until the UI is actually used. This creates a method to interrupt the UI, causing waitKey to return -2. This in turn, will cause ShowMenu to return -2. This allows switching between recovery and fastbootd via usb commands. Test: adb shell /data/nativetest64/recovery_unit_test/recovery_unit_test Bug: 78793464 Change-Id: I4c6c9aa18d79070877841a5c9818acf723fa6096
2018-07-17Fix the arguments passed to getopt_long(3).Tao Bao1-0/+10
The getopt_long(3) implementation in Android (upstream freebsd) expects a null-terminated array while parsing long options with required args. if (long_options[match].has_arg == required_argument) { optarg = nargv[optind++]; } ... if (long_options[match].has_arg == required_argument && optarg == NULL) { return (BADARG); } This seems to make sense in practice, as getopt(3) takes the first two arguments of argc and argv that are "as passed to the main() function on program invocation", and both of C and C++ spec say "the value of argv[argc] shall be 0". Prior to the CL, we may run into undefined behavior on malformed input command line (e.g. missing arg for an option that requires one). This CL fixes the issue by always appending a nullptr to the argument list (but without counting that into argc). Test: Build and boot into recovery with commands. Change-Id: Ic6c37548f4db2f30aeabd40f387ca916eeca5392
2018-07-12tests: Clean up the temporary dirs post-run.Tao Bao2-21/+22
TemporaryDir only deletes empty dirs (not done by its dtor because it tries to keep the temporary files available on error exit). Also change FreeCacheTest::MockFreeSpaceChecker to be static. Test: Run recovery_unit_test on marlin. Check /data/local/tmp post-run. Change-Id: I1bd54eb840e3094b4f22ee84c059eec2998773bf
2018-07-12applypatch: Fix the return type of FreeSpaceForFile().Tao Bao1-6/+18
Prior to this CL, FreeSpaceForFile() was returning `size_t`, which may overflow on ILP32 when called on a partition with 4GiB+ free space. Additionally, it was returning static_cast<size_t>(-1) on error, but the caller in freecache.cpp didn't check for that. This CL changes its return type to `int64_t`, and moves the function into freecache.cpp since there's no external caller. Test: Run recovery_unit_test on marlin. Test: Code search shows no external user of FreeSpaceForFile(). Change-Id: I00f501a057726e1f1ab69f367c46c77b30f2d774
2018-07-10applypatch: Restrict applypatch_check to eMMC targets.Tao Bao1-85/+47
Also fix an error-pone behavior in previous code when verifying an eMMC target. As long as it loads the partition content successfully according to the SHAs embedded in the filename, it shouldn't further check against the SHAs given in the second argument. Because the loaded contents relate to a specific partition size. For example: apply_patch_check( "EMMC:/boot.img:src_size:src_hash:tgt_size:tgt_hash", "src_hash"); Assume "/boot.img" already has the desired hash of "tgt_hash", the previous code would give wrong verification result. The issue can be addressed by additionally listing "tgt_hash" as one of the desired SHAs (or by applying this CL). Bug: 110106408 Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: I8daafdbecd083f687e24d563ab089caa25667633
2018-07-07updater: Add ABORT command.Tao Bao1-0/+24
This will be used for testing purpose only, replacing the previously used "fail", to intentionally abort an update. As we're separating the logic between commands parsing and execution, "abort" needs to be considered as a valid command during the parsing. Test: recovery_unit_test and recovery_component_test on marlin. Change-Id: I47c41c423e62c41cc8515fd92f3c5959be08da02
2018-07-06tests: Split unit tests out of component/applypatch_test.cpp.Tao Bao1-0/+303
... into unit/applypatch_test.cpp. And rename the file to component/applypatch_modes_test.cpp. Bug: 110106408 Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: Ic23c4f054baa2fa0d5e8ea2fcffd22572f1f112e
2018-06-25updater: Check the number of args in Command::Parse.Tao Bao1-0/+25
Additionally checks for excess args when parsing ERASE, FREE, NEW, STASH and ZERO. Note that the check for MOVE, BSDIFF, IMGDIFF has been covered in Command::ParseTargetInfoAndSourceInfo. Test: Run recovery_unit_test on marlin. Change-Id: Ic8bc9b7a8dcf98f1f8db2e259607564508726857
2018-06-25updater: Add Command parsing codes.Tao Bao1-0/+275
The added codes are not used in the updater yet. The switch will happen in subsequent CLs. Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: I1ae8a233280f02c2171b43ef028bdccdacb39c59
2018-06-14tests: Skip ScreenRecoveryUITest on gr_init failure.Tao Bao1-1/+38
It addresses the ScreenRecoveryUITest failures on gce targets which don't have any graphics backend. Probing for all backend devices in tests could work, but would duplicate codes. This CL relies on the result of gr_init(). As a side effect, it may give false negatives if gr_init() is supposed to work but silently broken. But such issues are beyond ScreenRecoveryUITest's concern, which should be captured by the tests for minui or graphics backends instead. Fixes: 79616356 Test: Run recovery_unit_test on marlin. Test: Run recovery_unit_test on gce. Change-Id: I121aacc61c8a614447509506057ecfd8d86163e4
2018-06-06ui: join only if joinable.Tao Bao1-0/+5
The threads in RecoveryUI only get initialized if their Init()s finish successfully. Test: recovery_unit_test on marlin. Change-Id: Ic4b62300a3cbd47887d9f4a90dc26f8a7deab616
2018-06-05tests: Specify the death test style to avoid flakiness.Tao Bao2-0/+5
As warned below (while running the test), the default death test style (i.e. "fast") doesn't work well in a threaded context, which causes test flakiness (timeout or early exit). [WARNING] external/googletest/googletest/src/gtest-death-test.cc:836:: Death tests use fork(), which is unsafe particularly in a threaded context. For this test, Google Test detected 3 threads. This CL specifies the death test styles to be "threadsafe" for the following death tests. - RangeSetTest.GetBlockNumber - RangeSetTest.file_range - ScreenRecoveryUITest.LoadAnimation_MissingAnimation Test: mmma -j bootable/recovery Test: Run recovery_unit_test on marlin. Test passes and the above warning is gone. Change-Id: I245bbc09286702d5cb326f878c4391e842b66cc5
2018-05-26updater: Add Commmand class to manage BBOTA commands.Tao Bao1-0/+37
Move the commands map parsing out of PerformBlockImageUpdate(), as this can be done more easily by the caller. The goal (not done in this CL) is to decouple command parsing logic from the performers. This allows (a) focusing on the command logic in the performer; and (b) extending BBOTA commands syntax separately. Test: Run recovery_unit_test and recovery_component_test. Change-Id: Ife202398a7660b152d84a3ba17b90f93d19c55f2
2018-05-22ui: Use std::thread to create input/progress threads.Tao Bao1-2/+10
Test: Build and boot into recovery on walleye. Check the long press detection; `Run graphics test`. Change-Id: Ic3e9b0652fc3ff6fb3ad118df5ebb9bb4abda2cd
2018-05-14wear_ui: Address a TODO regarding {intro,loop}_frames.Tao Bao1-3/+53
Also add tests for LoadAnimation that cover the change. Test: Run `recovery_unit_test` on marlin. Change-Id: I0380a5cdd0d85d55baecf7759eb647b6a9f3a085
2018-05-09screen_ui: Fix an issue in RTL locale detection.Tao Bao1-1/+1
The CL in [1] moved android.os.RecoverySystem to send the locale argument in well-formed BCP 47 language tags (e.g. "en-US" instead of "en_US"), with the matching changes to recovery code in [2]. However, the one in ScreenRecoveryUI::SetLocale() was missed, which broke RTL locale detection when using new format. [1] commit 38715228 in platform/frameworks/base [2] commit 2078b22e in platform/bootable/recovery Test: Set the locale to "ar-EG". `Run graphics test` under recovery. Check the progress bar. Test: Run recovery_unit_test on marlin. Change-Id: I7c7f5e0725bfb096109c7192c19f3f008e8e47e3
2018-05-09tests: Add tests for ScreenRecoveryUI.Tao Bao1-0/+167
In order to support that, this CL adds Paths::set_resource_dir() to override the default resource dir ("/res/images/") that's only available under recovery. Note that since there're external modules depending on libminui, it adds a separate function of res_set_resource_dir(), instead of requiring the dependency on libotautil for everyone. Test: mmma -j bootable/recovery Test: Run recovery_unit_test on marlin. Change-Id: I0a7dcf4476808bea9e634eaffc9676f6cbaf92b7
2018-05-04otautil: Rename dir/sys/thermal utils.Tao Bao3-5/+5
Test: mmma -j bootable/recovery Change-Id: I32ab98549e91f993364306e4a88dc654221b3869
2018-05-03Move menu headers/items to std::vector<std::string>.Tao Bao1-12/+15
Test: mmma -j bootable/recovery Test: Run recovery_unit_test on marlin. Test: Build and boot into recovery image on angler. Check the UI that shows menu ('View recovery log', 'Wipe data', 'Run locale test'). Test: Start recovery with '--prompt_and_wipe_data'. Check the UI. Change-Id: If8a4209e0bb4ca64f719f9f9465d3b3589a69cdc
2018-05-03screen_ui: Merge Menu::Start() into its ctor.Tao Bao1-21/+7
Since we instantiate a Menu object each time for a given set of header/items, we don't have a use case of re-populating an existing Menu with different data (which is what Menu::Start() does). Test: mmma -j bootable/recovery Test: Run recovery_unit_test on marlin. Test: Build and boot into recovery image on angler. Check the UI. Change-Id: Iaa2ba9d406ebd74c015e43198c17c5335b38df53
2018-03-24Factor out a menu class for screen uiTianjie Xu1-0/+198
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI and WearRecoveryUI. This helps us to support text icons as menu in the future. Bug: 74397117 Test: Check the menu under recovery on bullhead and a wear device. Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b Merged-In: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
2018-03-24Factor out a menu class for screen uiTianjie Xu1-0/+198
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI and WearRecoveryUI. This helps us to support text icons as menu in the future. Bug: 74397117 Test: Check the menu under recovery on bullhead and a wear device. Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b (cherry picked from commit 2b3f80068ece1040ba7c923afe1e70b705535ad5)
2017-11-09Load-balancing update_verifier worker threads.Tao Bao1-0/+80
Prior to this CL, the block verification works were assigned based on the pattern of the ranges, which could lead to unbalanced workloads. This CL adds RangeSet::Split() and moves update_verifier over. a) For the following care_map.txt on walleye: system 20,0,347,348,540,556,32770,33084,98306,98620,163842,164156,229378,229692,294914,295228,524289,524291,524292,524348,529059 vendor 8,0,120,135,32770,32831,94564,98304,98306 Measured the time costs prior to and with this CL with the following script. $ cat test_update_verifier.sh #!/bin/sh adb shell stop adb shell "cp /data/local/tmp/care_map.txt /data/ota_package/" for i in $(seq 1 50) do echo "Iteration: $i" adb shell "bootctl set-active-boot-slot 0" adb shell "echo 3 > /proc/sys/vm/drop_caches" adb shell "time /data/local/tmp/update_verifier" sleep 3 done Without this CL, the average time cost is 5.66s, while with the CL it's reduced to 3.2s. b) For the following care_map.txt, measured the performance on marlin: system 18,0,271,286,457,8350,32770,33022,98306,98558,163842,164094,196609,204800,229378,229630,294914,295166,501547 vendor 10,0,42,44,85,2408,32770,32806,32807,36902,74242 It takes 12.9s and 5.6s without and with the CL respectively. Fixes: 68553827 Test: recovery_unit_test Test: Flash new build and trigger update_verifier. Check the balanced block verification. Change-Id: I5fa4bf09a84e6b9b0975ee5f522724464181333f
2017-11-07otautil: Remove the aborts in RangeSet::Parse().Tao Bao1-14/+64
We used to CHECK and abort on parsing errors. While it works fine for the updater use case (because recovery starts updater in a forked process and collects the process exit code), it's difficult for other clients to use RangeSet as a library (e.g. update_verifier). This CL switches the aborts to returning empty RangeSet instead. Callers need to check the parsing results explicitly. The CL also separates RangeSet::PushBack() into a function, and moves SortedRangeSet::Clear() into RangeSet. Test: recovery_unit_test Test: Sideload an OTA package with the new updater on angler. Test: Sideload an OTA package with injected range string errors. The updater aborts from the explicit checks. Change-Id: If2b7f6f41dc93af917a21c7877a83e98dc3fd016
2017-10-11Move rangeset.h and print_sha1.h into otautil.Tao Bao1-2/+2
Also drop the "bootable/recovery" path in LOCAL_C_INCLUDES from applypatch modules. Test: lunch aosp_{angler,bullhead,fugu,dragon,sailfish}-userdebug; mmma bootable/recovery Change-Id: Idd602a796894f971ee4f8fa3eafe36c42d9de986
2017-08-19Move Image/ImageChunk/PatchChunk declaration into header filesTianjie Xu1-1/+1
1. Move the declaration of the Image classes to the header file to make testing easier. 2. Also move rangeset.h to bootable/recovery to allow access in imgdiff. Test: recovery component test Change-Id: I68a863e60a3f2e7ae46ee48f48eb15391f5f4330
2017-08-01Add implemention of SortedRangeSetTianjie Xu1-0/+47
This is useful in imgdiff to maintain the block ranges of splitted source image. Bug: 34220646 Test: mma && unit tests pass Change-Id: I6427f2ea50f0e3b0aa3dd01880ec0206679b7429
2017-07-27otautil: Clean up dirCreateHierarchy().Tao Bao1-21/+11
- Changed to std::string based implementation (mostly moved from the former make_parents() in updater/install.cpp); - Removed the timestamp parameter, which is only neeed by file-based OTA; - Changed the type of mode from int to mode_t; - Renamed dirCreateHierarchy() to mkdir_recursively(). Test: recovery_unit_test passes. Test: No external user of dirCreateHierarchy() in code search. Change-Id: I71f8c4b29bab625513bbc3af6d0d1ecdc3a2719a
2017-07-25otautil: Delete dirUnlinkHierarchy().Tao Bao1-32/+0
This function has become obsolete since we've removed file-based OTA support (it was needed by 'delete_recursive' edify function earlier). Test: mmma -j bootable/recovery Test: Code search shows no active user of the function. Change-Id: If6faaa759d4c849b79acba4e6adb82baadc89f7a
2017-05-24kill package_extract_dirTianjie Xu2-228/+0
It's only used by file-based OTA which has been deprecated for O. Test: mma Change-Id: I439c93155ca94554d827142c99aa6c0845cc7561
2017-05-02Move sysMapFile and sysReleaseMap into MemMapping class.Tao Bao2-38/+27
Test: recovery_component_test Test: recovery_unit_test Test: Apply an OTA on angler. Change-Id: I7170f03e4ce1fe06184ca1d7bcce0a695f33ac4d
2017-04-03Change the internal representation in RangeSet.Tao Bao1-6/+34
This CL makes the following changes to RangeSet: - Uses std::pair<size_t, size_t> to represent a Range; - Uses std::vector<Range> to represent a RangeSet; - Provides const iterators (forward and reverse); - Provides const accessor; - 'blocks()' returns the number of blocks (formerly 'size'); - 'size()' returns the number of Range's (formerly 'count'). Test: recovery_unit_test Test: Apply an incremental update with the new updater. Change-Id: Ia1fbb343370a152e1f7aa050cf914c2da09b1396
2017-03-31Move parse_range() and range_overlaps() into RangeSet.Tao Bao1-0/+84
Also move RangeSet into a header file to make it testable, and add unit tests. In RangeSet::Parse() (the former parse_range()), use libbase logging to do assertions. This has the same effect as the previous exit(EXIT_FAILURE) to terminate the updater process and abort an update. The difference lies in the exit status code (i.e. WEXITSTATUS(status) in install.cpp), which changes from 1 (i.e. EXIT_FAILURE) to 0. Test: recovery_unit_test Test: Apply an incremental update with the new updater. Change-Id: Ie8393c78b0d8ae0fd5f0ca0646d871308d71fff0
2017-03-29Merge "Add the missing sr-Latn into png files and rename the png locale header" am: 713d915636 am: dc235b5ab9Tianjie Xu1-10/+11
am: 5ec12126f0 Change-Id: Ia6b861c91958d3be23a4a7456d6d5d8e4a1607c8 (cherry picked from commit 9166f66eee883d6d6cc280a6c355e5528bb4a3f0)
2017-03-25Add the missing sr-Latn into png files and rename the png locale headerTianjie Xu1-10/+11
Switch the locale header in the png files from Locale.toString() to Locale.toLanguageTag(). For example, en_US --> en-us and sr__#Latn --> sr-Latn. Also clean up recovery a bit to expect the new locale format. Bug: 35215015 Test: sr-Latn shows correctly under graphic tests && recovery tests pass Change-Id: Ic62bab7756cdc6e5f98f26076f7c2dd046f811db
2017-03-21Refactor asn1_decoder functions into a class.Tao Bao1-217/+180
Test: mmma bootable/recovery Test: recovery_unit_test passes. Test: recovery_component_test passes. Change-Id: If0bf25993158eaebeedff55ba4f4dd0f6e5f937d
2017-03-21verify_file: Add constness to a few addresses.Tao Bao1-14/+14
We should not touch any data while verifying packages (or parsing the in-memory ASN.1 structures). Test: mmma bootable/recovery Test: recovery_component_test passes. Test: recovery_unit_test passes. Change-Id: Ie990662c6451ec066a1807b3081c9296afbdb0bf
2017-01-19Add checkers and tests for empty locale in PNG fileTianjie Xu1-0/+3
match_locale() will return false for empty locale string in the PNG file. Also add a manual test to validate if a PNG file is qualified to use under recovery. Bug: 34054052 Test: recovery_manual_test catches invalid PNG files successfully & Locale_test passed Change-Id: Id7e2136e1d8abf20da15825aa7901effbced8b03
2016-12-22tests: Add test coverage for DirUtil.Tao Bao1-0/+150
Test: recovery_unit_test passes. Change-Id: I764c56404c7ccdd57ae5486c946fbc9ac6ae7bc9
2016-12-22tests: Add testcase for ZipUtil.Tao Bao1-0/+191
Test: recovery_unit_test passes. Change-Id: I8ad364e88aaee31579ed7206aad8e5620518d797
2016-12-22tests: Replace the O_RDONLY in access(2).Tao Bao1-6/+15
Although O_RDONLY gives the same value as F_OK (0), it's not the right friend of access(2). Also clean up the temporary files from ZipTest (TemporaryDir doesn't like non-empty directory). Test: recovery_unit_test passes and has no leftover. Change-Id: I66b90e43c0954c89ce08b36b9e2b4e84183b28f5
2016-11-16updater: Fix the wrong return value for package_extract_file().Tao Bao1-3/+0
'bool success = ExtractEntryToFile()' gives opposite result. Fix the issue and add testcases. Change the one-argument version of package_extract_file() to explicitly abort for non-existent zip entry. Note that this is NOT changing the behavior. Prior to this CL, it aborts from Evaluate() function, by giving a general cause code. Now it returns kPackageExtractFileFailure. BUg: 32903624 Test: recovery_component_test works. Change-Id: I7a273e9c0d9aaaf8c472b2c778f7b8d90362c24f (cherry picked from commit ef0eb3b01b66fbbc97908667a3dd1e02d710cbb7)
2016-11-15updater: Fix the wrong return value for package_extract_file().Tao Bao1-3/+0
'bool success = ExtractEntryToFile()' gives opposite result. Fix the issue and add testcases. Change the one-argument version of package_extract_file() to explicitly abort for non-existent zip entry. Note that this is NOT changing the behavior. Prior to this CL, it aborts from Evaluate() function, by giving a general cause code. Now it returns kPackageExtractFileFailure. BUg: 32903624 Test: recovery_component_test works. Change-Id: I7a273e9c0d9aaaf8c472b2c778f7b8d90362c24f
2016-11-08Move recovery_test.cpp out of unit testTianjie Xu1-91/+0
Move recovery-refresh/persist tests out because these tests need special steps to run. Also switch the constants to std::string. Test: recovery_manual_test passed on an A/B device Change-Id: I60b3ec6f094044945c3aafc1fae540896a6ddea6
2016-11-08otautil: Clean up SysUtil.cpp.Tao Bao1-0/+140
Add unit testcases for sysMapFile(). Test: recovery_unit_test passes. Test: Build and use the new recovery image to sideload a package. Test: Build and use the new recovery image to install an update. Change-Id: I77d8f1ea151ab513865d992c256ba93a1fcb51a4 (cherry picked from commit c3292f3fcbb3cd608cc19b7459751fa5bb64ab84)
2016-11-07otautil: Clean up SysUtil.cpp.Tao Bao1-0/+140
Add unit testcases for sysMapFile(). Test: recovery_unit_test passes. Test: Build and use the new recovery image to sideload a package. Test: Build and use the new recovery image to install an update. Change-Id: I77d8f1ea151ab513865d992c256ba93a1fcb51a4
2016-11-04tests: Fix unit/zip_test.cpp.Tao Bao1-59/+50
It's accidentally broken when refactoring the testdata path. Also clean up the testcase a bit by simplying the file reading. Test: recovery_unit_test passes. Change-Id: I592a1cf5a4eb9a7a5f4eecbc6426baeedeb02781
2016-10-18Replace minzip with libziparchiveTianjie Xu1-0/+93
Clean up the duplicated codes that handle the zip files in bootable/recovery; and rename the library of the remaining utility functions to libotautil. Test: Update package installed successfully on angler. Bug: 19472796 Change-Id: Iea8962fcf3004473cb0322b6bb3a9ea3ca7f679e
2016-10-04recovery: drop log/logger.hMark Salyzyn1-1/+0
private/android_logger.h contains all we need. Test: compile Bug: 26552300 Bug: 31289077 Bug: 31456426 Change-Id: I6714d730372dc81f784e7f9dfee8a33848643a5d
2016-04-20Fix matches_locale functionTianjie Xu1-0/+29
matches_locale was expecting input locale string to have at most one underscore; as a result "zh_CN_#Hans" ignores "zh_CN" and matches into "zh". Fix the match function and add unit tests. Bug: 27837319 Change-Id: I4e8a66f91cae6ac2a46b6bf21f670d5ea564c7c8
2016-03-31recovery: use __android_log_pmsg_file_write for log filesMark Salyzyn1-0/+92
(cherry-pick from commit a4f701af93a5a739f34823cde0c493dfbc63537a) - Add call to __android_log_pmsg_file_write for recovery logging. - Add call to refresh pmsg if we reboot back into recovery and then allow overwrite of those logs. - Add a new one-time executable recovery-refresh that refreshes pmsg in post-fs phase of init. We rely on pmsg eventually scrolling off to age the content after recovery-persist has done its job. - Add a new one-time executable recovery-persist that transfers from pmsg to /data/misc/recovery/ directory if /cache is not mounted in post-fs-data phase of init. - Build and appropriately trigger the above two as required if BOARD_CACHEIMAGE_PARTITION_SIZE is undefined. - Add some simple unit tests NB: Test failure is expected on systems that do not deliver either the recovery-persist or recovery-refresh executables, e.g. systems with /cache. Tests also require a timely reboot sequence of test to truly verify, tests provide guidance on stderr to direct. Bug: 27176738 Change-Id: I17bb95980234984f6b2087fd5941b0a3126b706b
2016-03-28recovery: use __android_log_pmsg_file_write for log filesMark Salyzyn1-0/+92
- Add call to __android_log_pmsg_file_write for recovery logging. - Add call to refresh pmsg if we reboot back into recovery and then allow overwrite of those logs. - Add a new one-time executable recovery-refresh that refreshes pmsg in post-fs phase of init. We rely on pmsg eventually scrolling off to age the content after recovery-persist has done its job. - Add a new one-time executable recovery-persist that transfers from pmsg to /data/misc/recovery/ directory if /cache is not mounted in post-fs-data phase of init. - Build and appropriately trigger the above two as required if BOARD_CACHEIMAGE_PARTITION_SIZE is undefined. - Add some simple unit tests NB: Test failure is expected on systems that do not deliver either the recovery-persist or recovery-refresh executables, e.g. systems with /cache. Tests also require a timely reboot sequence of test to truly verify, tests provide guidance on stderr to direct. Bug: 27176738 Change-Id: I17bb95980234984f6b2087fd5941b0a3126b706b
2016-02-04Refactor existing tests to use gtestJed Estep1-0/+238
Bug: 26962907 Change-Id: I5f80636af1740badeff7d08193f08e23f4e4fee1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 11:19:34 +0100