summaryrefslogtreecommitdiffstats
path: root/recovery_main.cpp (unfollow)
Commit message (Collapse)AuthorFilesLines
2020-05-19Add EthernetDevice to manage ethernet connection.Hongguang Chen1-0/+5
The current fastbootd only supports USB protocol. But some Android TV devices are built without USB port. The fastbootd cannot be used on those ATV devices due to it. aosp/1295566 enables fastbootd over ethernet. This change adds an EthernetDevice to manage ethernet connection and set fastbootd protcol property fastbootd.protocol to enable fastbootd over ethernet in recovery mode. It uses IPv6 link-local address to not expose the devices out of the network segment. The devices who want to use this EthernetDevice should add “TARGET_RECOVERY_UI_LIB := librecovery_ui_ethernet” into BoardConfig.mk. BUG: 152544169 BUG: 155198345 Test: Enter and exit fastboot mode and check eth0 IPv6 link-local address on screen UI. Change-Id: I73fe44be3790bdba5a6059fbba3f7264b21eed99 Merged-In: I73fe44be3790bdba5a6059fbba3f7264b21eed99
2020-05-16Add EthernetDevice to manage ethernet connection.Hongguang Chen1-0/+5
The current fastbootd only supports USB protocol. But some Android TV devices are built without USB port. The fastbootd cannot be used on those ATV devices due to it. aosp/1295566 enables fastbootd over ethernet. This change adds an EthernetDevice to manage ethernet connection and set fastbootd protcol property fastbootd.protocol to enable fastbootd over ethernet in recovery mode. It uses IPv6 link-local address to not expose the devices out of the network segment. The devices who want to use this EthernetDevice should add “TARGET_RECOVERY_UI_LIB := librecovery_ui_ethernet” into BoardConfig.mk. BUG: 152544169 Test: Enter and exit fastboot mode and check eth0 IPv6 link-local address on screen UI. Change-Id: I73fe44be3790bdba5a6059fbba3f7264b21eed99
2019-10-30Start adbd in user mode if bootloader is unlockedTianjie Xu1-1/+7
During automatic tests, we sometimes want to reboot the device out of the rescue party remotely. And per http://go/recovery-adb-access, one option is to start adbd in user build if the device has an unlocked bootloader. This should not add more surface of attack. Because verified boot is off with the unlocked bootloader, and the user can always flash a custom recovery image that always starts adbd. Bug: 141247819 Test: check adbd doesn't start in user build, unlock bootloader, and check adbd starts. Change-Id: I851746245f862cb4dfb01e6c3ad035f2c9f9ccec
2019-10-02otautil: Factor out the utils that're private to recovery.Tao Bao1-2/+2
A number of utility functions are intended for serving recovery's own use. Exposing them via libotautil (which is a static lib) would pass the dependencies onto libotautil's users (e.g. recovery image, updater, host simulator, device-specific recovery UI/updater extensions etc). This CL finds a new home for the utils that are private to recovery. Test: mmma bootable/recovery Change-Id: I575e97ad099b85fe1c1c8c7c9458a5a43d4e11e1
2019-09-19recovery: Don't report unrecognized option in recovery_main.Tao Bao1-0/+7
recovery_main is only interested in a subset of options. Suppress the warning for unrecognized options (which are likely intended for recovery). Fixes: 141239600 Test: On Pixel 3a, write `--security` flag into /misc and reboot recovery. Check that recovery_main no longer reports "unrecognized option" warning. # echo "recovery\n--security\n" | \ dd of=/dev/block/by-name/misc conv=notrunc bs=1 seek=64 # killall -9 recovery # cat /tmp/recovery.log Test: Write `--show_text=foo` instead, and check that recovery reports "option `--show_text' doesn't allow an argument". Change-Id: I1cb3a5ed6db91e41453b8aad00c8608f78ac1fa6
2019-08-15Remove common.hTianjie Xu1-4/+15
Additionally kill the global variable: reason, stage; move them to a separate BootState class instead. Vendor specific recovery code will need to call getters from Device() class to access these variables. Bug: 137705917 Test: unit tests pass, boot sailfish into recovery, code search and no code includes common.h in vendor specific recovery. Change-Id: Ia50a5ea951212c25548562f29cc9cf78505b5e34
2019-07-24Clean up some global variables in common.hTianjie Xu1-13/+11
Some global variables are only used for recovery.cpp and recovery_main.cpp, remove them from common.h and handle their usage accordingly. Variables include: static constexpr int kRecoveryApiVersion; extern struct selabel_handle* sehandle; extern RecoveryUI* ui; extern bool has_cache; bool is_ro_debuggable(); Test: unit tests pass, boot into recovery mode and run graphic tests Change-Id: If83a005786c9b38412731da97aaf85af69a3b917
2019-05-23recovery: report compliant reboot reason (Part Deux)Mark Salyzyn1-2/+17
shutdown and reboot should have a corresponding sub-reason. Adding: "reboot,userrequested,fastboot" "reboot,userrequested,recovery" "reboot,userrequested,recovery,ui" "shutdown,userrequested,fastboot" "shutdown,userrequested,recovery" "reboot,unknown#" (Can't happen, debug) Test: manual, multiple targets, enter recovery, be able to exit recovery Bug: 133326470 Change-Id: Ibfcb2a23158e8e99922e8053edd815fb592150f2
2019-05-22Revert "recovery: report compliant reboot reason"Tao Bao1-17/+2
This reverts commit 6f4e4db4f9e0911a07c6393d01e4380e844f7891. Reason for revert: Booting out of recovery (choose `Reboot system now`) on taimen is broken. Device keeps booting back into recovery. Bug: 133326470 Test: Choose `Reboot system now` from recovery menu. Deivce attempts normal boot. Change-Id: I6e85fc248e18953a6fb94513c3abc7e7e0fb0477
2019-05-20recovery: report compliant reboot reasonMark Salyzyn1-2/+17
shutdown and reboot should have a corresponding sub-reason. Adding: "reboot,fastboot_menu" "reboot,recovery_menu" "reboot,recovery_ui" "shutdown,fastboot" "shutdown,recovery" "reboot,unknown#" Test: none Change-Id: Icf1ab0d462ec2de2272914a36994a095998d6186
2019-05-10roots: Remove get_system_root and logical_partitions_mapped.Tao Bao1-1/+2
Test: TreeHugger Test: Boot into recovery on blueline. Choose "Mount system partition". Change-Id: Iac475d18ce2415de09dc0bf009ad4cf0383ffede
2019-04-29Consolidate the codes that handle reboot/shutdown.Tao Bao1-10/+8
Test: Choose `Reboot system now`, `Power off`, `Reboot to bootloader` from recovery UI respectively. Test: `adb reboot recovery` while under sideload mode. Change-Id: I0f3d55b80b472178ea4f6970b29cd9df0778b639
2019-04-28Parse BCB command to enter rescue mode.Tao Bao1-4/+28
bootloader will set `boot-rescue` in BCB command field to indicate booting into rescue mode. This CL adds the matching parsing code. This CL changes the on-screen UI to display the default image while waiting for each sideload / rescue command. It also changes the minadbd reboot handlers to use REBOOT_ instead of the previous ENTER_ actions. This ensures a reboot going through bootloader, which may load a newly installed bootloader/recovery. Bug: 128505466 Bug: 128415917 Test: Boot into rescue mode. Run `adb rescue getprop` and `adb rescue install`. Check the UI. Then run `adb reboot rescue`. Change-Id: I5b7de9dfd898ed8e14bea0d4ad7385a9bae26e94 Merged-In: I5b7de9dfd898ed8e14bea0d4ad7385a9bae26e94 (cherry picked from commit d9cb014d431fee946308bdb8979c8e8fa74b582f)
2019-04-26minadbd: Support `adb reboot` under sideload/rescue modes.Tao Bao1-0/+5
Bug: 128415917 Test: Run the following commands under sideload and rescue modes respectively. $ adb reboot $ adb reboot bootloader $ adb reboot recovery $ adb reboot rescue $ adb reboot invalid Change-Id: I84daf63e3360b7b4a0af5e055149a4f54e10ba90 Merged-In: I84daf63e3360b7b4a0af5e055149a4f54e10ba90 (cherry picked from commit 10f441a9dbb91be3124f455439631abcf8e96cde)
2019-04-26Allow entering rescue mode via recovery UI.Tao Bao1-0/+4
Only enabled on debuggable builds. Bug: 128415917 Test: Sideload package on taimen. Test: Choose "Enter rescue" from recovery UI. Change-Id: I913dbdbcffd3179e6fa72ca862f74ca8f1364b02 Merged-In: I913dbdbcffd3179e6fa72ca862f74ca8f1364b02 (cherry picked from commit c6dc325e88a25201aa3856e6532c3ed14203a376)
2019-04-25Parse BCB command to enter rescue mode.Tao Bao1-4/+28
bootloader will set `boot-rescue` in BCB command field to indicate booting into rescue mode. This CL adds the matching parsing code. This CL changes the on-screen UI to display the default image while waiting for each sideload / rescue command. It also changes the minadbd reboot handlers to use REBOOT_ instead of the previous ENTER_ actions. This ensures a reboot going through bootloader, which may load a newly installed bootloader/recovery. Bug: 128505466 Test: Boot into rescue mode. Run `adb rescue getprop` and `adb rescue install`. Check the UI. Then run `adb reboot rescue`. Change-Id: I5b7de9dfd898ed8e14bea0d4ad7385a9bae26e94
2019-04-24minadbd: Support `adb reboot` under sideload/rescue modes.Tao Bao1-0/+5
Bug: 128415917 Test: Run the following commands under sideload and rescue modes respectively. $ adb reboot $ adb reboot bootloader $ adb reboot recovery $ adb reboot rescue $ adb reboot invalid Change-Id: I84daf63e3360b7b4a0af5e055149a4f54e10ba90
2019-04-22Fall back to en-US if localized bitmap is missing for a localexunchang1-1/+0
We used to show the image for the last locale or an empty image, if the localized image is missing for a specific locale. As the default english one is more meaningful to users, we should just error out and fall back to use the default locale when the image loading fails. Bug: 128934634 Test: run graphic test, locale test Change-Id: Iafd3e8466aec63b4952d1959b2a3d37e358677d4
2019-04-17Allow entering rescue mode via recovery UI.Tao Bao1-0/+4
Only enabled on debuggable builds. Bug: 128415917 Test: Sideload package on taimen. Test: Choose "Enter rescue" from recovery UI. Change-Id: I913dbdbcffd3179e6fa72ca862f74ca8f1364b02
2019-04-16DO NOT MERGE: Move load & restore logs to logging.cppxunchang1-1/+1
We perform these steps to perserve the recovery logs when wiping /cache partition. Move them to logging.cpp to keep the actually EraseVolume function concise. Bug: 130166585 Test: unit tests pass, mount cache and check last log after cache Change-Id: Idc52833817a446f3a0148a3dd2112f911c9ef48d (cherry picked from commit 2239b9e4dd08e307ad74dc44b597fd53d2d17de8)
2019-04-16DO NOT MERGE: Move wipe cache|data to libinstallxunchang1-1/+4
Therefore, libinstall becomes the sole owner to handle the request from minadbd service. The change also includes 1. move logging.cpp out of librecovery 2. drop the dependency on common.h 3. now it's more sensible to move the wipe_cache as part of install_package. move the wipe_cache to the end of the function. Bug: 130166585 Test: wipe data and cache from menu Change-Id: I6f356dccdb38015c50acf756bac246f87c30fc1f (cherry picked from commit 316e9717461890dd319dc370970069fe4532a561)
2019-04-16DO NOT MERGE: Add socket communication between recovery and minadbdxunchang1-11/+0
This cl adds a socket pair to support the communication between recovery and minadbd. Therefore, minadbd will be able to issue multiple commands to recovery and get back the status of each command. This cl also switches the adb sideload from the recovery menu to use this protocol; and moves minadbd to a separate binary. Bug: 130166585 Test: sideload a package Change-Id: I80d36d5c4e6fe1ae3ea23640907bc50c0dc0d482 (cherry picked from commit 34690ced91e22f5d9b5dd19c33b11c8e0b4bafa0)
2019-04-16Move load & restore logs to logging.cppxunchang1-1/+1
We perform these steps to perserve the recovery logs when wiping /cache partition. Move them to logging.cpp to keep the actually EraseVolume function concise. Bug: 130166585 Test: unit tests pass, mount cache and check last log after cache Change-Id: Idc52833817a446f3a0148a3dd2112f911c9ef48d
2019-04-15Move wipe cache|data to libinstallxunchang1-1/+4
Therefore, libinstall becomes the sole owner to handle the request from minadbd service. The change also includes 1. move logging.cpp out of librecovery 2. drop the dependency on common.h 3. now it's more sensible to move the wipe_cache as part of install_package. move the wipe_cache to the end of the function. Bug: 130166585 Test: wipe data and cache from menu Change-Id: I6f356dccdb38015c50acf756bac246f87c30fc1f
2019-04-11Add socket communication between recovery and minadbdxunchang1-11/+0
This cl adds a socket pair to support the communication between recovery and minadbd. Therefore, minadbd will be able to issue multiple commands to recovery and get back the status of each command. This cl also switches the adb sideload from the recovery menu to use this protocol; and moves minadbd to a separate binary. Bug: 130166585 Test: sideload a package Change-Id: I80d36d5c4e6fe1ae3ea23640907bc50c0dc0d482
2019-03-29recovery: Remove SetUsbConfig() out of common.h.Tao Bao1-0/+6
libinstall now has its own copy. Test: mmma -j bootable/recovery Change-Id: Ibbe7084e15baeb7e744f2175d5944477092acc9e
2019-03-29Move install to separate modulexunchang1-1/+1
Build libinstall as a shared library. Also drop the dependency on the global variables in common.h. Test: unit tests pass, sideload an OTA Change-Id: I30a20047768ce00689fc0e7851c1c5d712a365a0
2019-03-21Move librecovery_ui to a sub-directoryTianjie Xu1-3/+3
This helps to expose librecovery_ui for device specific RecoveryUi. Bug: 76436783 Test: mma, unit tests pass Change-Id: Ic6c3d301d5833e4a592e6ea9d9d059bc4e4919be (cherry picked from commit b5108c372c8b92671ea5ebb4eeff00757fcee187)
2019-03-21Move librecovery_ui to a sub-directoryTianjie Xu1-3/+3
This helps to expose librecovery_ui for device specific RecoveryUi. Bug: 76436783 Test: mma, unit tests pass Change-Id: Ic6c3d301d5833e4a592e6ea9d9d059bc4e4919be
2019-03-01Use android::base::Pipe.Tao Bao1-15/+12
Also clean up the comments regarding updater/recovery protocol. Test: Sideload a package on taimen. Check that /tmp/recovery.log contains the log from update_engine_sideload. Test: Factory reset on taimen. Check that log file has the info from mke2fs. Change-Id: If560269ce7007769fc85a63bd228813bdd75bebd
2019-02-12Add a logo to the fastbootd screen.David Anderson1-0/+2
fastbootd looks too much like recovery, even if you're carefully reading the menu. It's not obvious the device is in a flashing mode, and it's too tempting to reboot or unplug the device in this state. As a first step, this patch adds a big red "fastbootd" logo so it's less obviously in recovery mode. Bug: 120429730 Test: manual test Change-Id: I73359f1fdfdc0b1694993f760fe7f35c5713b24e
2018-11-16logical -> dynamic partitions.Yifan Hong1-2/+2
Reflect a name change. Test: boots Test: boot into recovery Bug: 119286600 Change-Id: I7c323f27574ce033b8fc1750aab00f7300c5cc84
2018-10-30recovery: Fix mounting /system with dynamic partitions.David Anderson1-2/+7
When using dynamic partitions, the blk_device field in fstab_rec must be translated to a /dev/block/dm-N node with fs_mgr_update_logical_partition. However, init will not have created these nodes to begin with since CreateLogicalPartitions is not called in recovery. This patch addresses both issues. Note that flashing system through fastbootd will not work while /system is mounted. Bug: 118634720 Test: manual test Change-Id: I06c83309d09eab6b65245b1ed10c51d05398f23e
2018-09-20Enter into userspace fastboot only if the device supports itHridya Valsaraju1-1/+2
Test: For devices not supporting logical partitions, 'adb reboot fastboot' command reboots into Android. Bug: 78793464 Change-Id: Ie6c6ccdebfee9302a9996ac5bc66069dbd817987
2018-09-18Show 'Enter Fastboot' menu item only if device supports fastbootdHridya Valsaraju1-0/+4
Bug: 112664456 Test: Manual, 'Enter Fastboot' option not visible. Change-Id: I2642391a69a11cd0496c1287130b3b0291c93232
2018-09-08Fix sideload for user devices by adding a new sideload configHridya Valsaraju1-5/+0
Bug: 113563995 Test: Tested the 'adb sideload' command on marlin user/userdebug builds and walleye user/userdebug builds Change-Id: I00d565547b85f2db87012e4a08316609e03395ac
2018-08-22recovery: Add "boot-fastboot" command to BCB.David Anderson1-1/+12
This change adds a new "boot-fastboot" command in order to boot into fastboot without overwriting recovery tasks. This also allows bootloaders to boot directly into userspace fastboot from the bootloader menu, or via bootloader fastboot. Bug: 112277594 Test: adb reboot fastboot Change-Id: Ia0c9a0961a76c6cbe19486590179abaa50d93f58
2018-08-14Add fastboot mode to recoveryHridya Valsaraju1-21/+103
Add a fastboot mode to recovery that can be entered with command line args or with the ui. Add usb property triggers to switch between fastboot and adb configurations. Allow switching between fastboot and adb through usb commands by opening a unix socket. adbd/fastbootd writes to this socket, which interrupts the ui and switches to the new mode. Test: Use fastboot mode Bug: 78793464 Change-Id: I7891bb84427ec734a21a872036629b95ab3fb13c
2018-08-06Dynamically load device-specific recovery UI lib.Tao Bao1-1/+27
We used to statically link the device-specific recovery UI extension (`TARGET_RECOVERY_UI_LIB`) into `recovery`. Such a logic can't be easily migrated to Soong, as modules specified by `TARGET_RECOVERY_UI_LIB` may not be built with Soong. Instead of porting all the device-specific codes over, this CL builds and installs the UI lib as a shared library with Android.mk. `recovery` dlopen(3)'s and dlsym(3)'s `make_device` to invoke the device-specific UI lib on start. Note that in order to make dlopen(3) actually working, we have to switch `recovery` to be dynamically linked (we will make the move later anyway). Bug: 110380063 Test: Build and boot into marlin recovery image. Check that device-specific recovery UI is successfully loaded. Change-Id: Ia9861c7559a95f3f50676534540c0cb87cae4574
2018-07-17Fix the arguments passed to getopt_long(3).Tao Bao1-5/+2
The getopt_long(3) implementation in Android (upstream freebsd) expects a null-terminated array while parsing long options with required args. if (long_options[match].has_arg == required_argument) { optarg = nargv[optind++]; } ... if (long_options[match].has_arg == required_argument && optarg == NULL) { return (BADARG); } This seems to make sense in practice, as getopt(3) takes the first two arguments of argc and argv that are "as passed to the main() function on program invocation", and both of C and C++ spec say "the value of argv[argc] shall be 0". Prior to the CL, we may run into undefined behavior on malformed input command line (e.g. missing arg for an option that requires one). This CL fixes the issue by always appending a nullptr to the argument list (but without counting that into argc). Test: Build and boot into recovery with commands. Change-Id: Ic6c37548f4db2f30aeabd40f387ca916eeca5392
2018-05-17recovery: Reset optind to 1 after getoptJerry Zhang1-0/+1
The getopt library exposes optind which is the next index to be processed. When scanning is restarted, optind has to be reset to 1. Test: Recovery works Bug: 78793464 Change-Id: I1efca3fb985ffbdfe91e43767469733cda6e7d5b
2018-05-16recovery: Refactor common setup into main()Jerry Zhang1-3/+223
Move more common setup into the main function. Main() handles all 1 time setup, such as ui, logging, and secontext. Recovery_main() takes in command line arguments, does any necessary recovery work, and can be called multiple times from main(). Test: Recovery works Bug: 78793464 Change-Id: I2d2595fc342b4ddfa80f4e06b30e44263132acd9 Merged-In: I2d2595fc342b4ddfa80f4e06b30e44263132acd9
2018-05-16recovery: Refactor common setup into main()Jerry Zhang1-3/+223
Move more common setup into the main function. Main() handles all 1 time setup, such as ui, logging, and secontext. Recovery_main() takes in command line arguments, does any necessary recovery work, and can be called multiple times from main(). Test: Recovery works Bug: 78793464 Change-Id: I2d2595fc342b4ddfa80f4e06b30e44263132acd9
2018-05-07recovery: Refactor logging code into logging.cppJerry Zhang1-1/+1
Move common logging related functions to rotate_logs.cpp, and rename that to logging.cpp. Test: Recovery works Bug: 78793464 Merged-In: I00f20a79a296680122b8437d54a87897c5cb2fc7 Change-Id: I00f20a79a296680122b8437d54a87897c5cb2fc7
2018-05-07recovery: Refactor logging code into logging.cppJerry Zhang1-1/+1
Move common logging related functions to rotate_logs.cpp, and rename that to logging.cpp. Test: Recovery works Bug: 78793464 Change-Id: I00f20a79a296680122b8437d54a87897c5cb2fc7 (cherry picked from commit 3c3f211d1e5698da6eea9e83584acb2dee4ca46e)
2018-05-07recovery: Refactor logging code into logging.cppJerry Zhang1-1/+1
Move common logging related functions to rotate_logs.cpp, and rename that to logging.cpp. Test: Recovery works Bug: 78793464 Change-Id: I00f20a79a296680122b8437d54a87897c5cb2fc7
2018-05-01recovery: Split main() into recovery_main.cpp.Tao Bao1-0/+162
This prepares for moving more codes from recovery into librecovery, so that they will become more easily testable. recovery_main.cpp will be the source code for recovery module, with the rest moved into librecovery. recovery_main.cpp mainly does the initializations, such as setting up the logger. Test: mmma -j bootable/recovery Test: recovery_component_test Test: Build and boot into recovery image on marlin. Change-Id: I8e846524546b6f3f0e32ed869e851f62261eef23 Merged-In: I8e846524546b6f3f0e32ed869e851f62261eef23
2018-05-01recovery: Split main() into recovery_main.cpp.Tao Bao1-0/+162
This prepares for moving more codes from recovery into librecovery, so that they will become more easily testable. recovery_main.cpp will be the source code for recovery module, with the rest moved into librecovery. recovery_main.cpp mainly does the initializations, such as setting up the logger. Test: mmma -j bootable/recovery Test: recovery_component_test Test: Build and boot into recovery image on marlin. Change-Id: I8e846524546b6f3f0e32ed869e851f62261eef23 (cherry picked from commit c241cb662440551eb0d2f42345f7ee08cf60a7dd)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 10:34:47 +0100