| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Implement a new method of sideloading over ADB that does not require
the entire package to be held in RAM (useful for low-RAM devices and
devices using block OTA where we'd rather have more RAM available for
binary patching).
We communicate with the host using a new adb service called
"sideload-host", which makes the host act as a server, sending us
different parts of the package file on request.
We create a FUSE filesystem that creates a virtual file
"/sideload/package.zip" that is backed by the ADB connection -- users
see a normal file, but when they read from the file we're actually
fetching the data from the adb host. This file is then passed to the
verification and installation systems like any other.
To prevent a malicious adb host implementation from serving different
data to the verification and installation phases of sideloading, the
FUSE filesystem verifies that the contents of the file don't change
between reads -- every time we fetch a block from the host we compare
its hash to the previous hash for that block (if it was read before)
and cause the read to fail if it changes.
One necessary change is that the minadbd started by recovery in
sideload mode no longer drops its root privileges (they're needed to
mount the FUSE filesystem). We rely on SELinux enforcement to
restrict the set of things that can be accessed.
Change-Id: Ida7dbd3b04c1d4e27a2779d88c1da0c7c81fb114
|
|
The default recovery UI will reboot the device when the power key is
pressed 7 times in a row, regardless of what recovery is doing.
Disable this feature during package installation, to minimize the
chance of corrupting the device due to a mid-install reboot. (Debug
packages can explicitly request that the feature be reenabled.)
Change-Id: I20f3ec240ecd344615d452005ff26d8dd7775acf
|
|
Changes minzip and recovery's file signature verification to work on
memory regions, rather than files.
For packages which are regular files, install.cpp now mmap()s them
into memory and then passes the mapped memory to the verifier and to
the minzip library.
Support for files which are raw block maps (which will be used when we
have packages written to encrypted data partitions) is present but
largely untested so far.
Bug: 12188746
Change-Id: I12cc3e809834745a489dd9d4ceb558cbccdc3f71
|
|
A system/core change made in Mar 26 2012 6ebf12f "init: Change umask
of forked processes to 077" changed the default umask of services
forked from init.
Because recovery is forked from init, it has a umask of 077. Therefore
when update-binary is forked from recovery, it too has a umask of 077.
This umask is overly restrictive and can cause problems for scripts
relying on minzip to extract binaries directly into the target
filesystem. Any directories updated by minzip will have their
permissions reset to r-x------ and created files will have similarly
restrictive permissions.
As it seems unlikely this security measure was intended to have this
side effect on legacy sideloads that do not have chmods to repair
the damage done by minzip, this change reverts the umask to 022 in
the fork made for update-binary.
Change-Id: Ib1a3fc83aa4ecc7480b5d0c00f3c7d0d040d4887
|
|
(cherry picked from commit bac7fba02763ae5e78e8e4ba0bea727330ad953e)
Change-Id: I01c38d7fea088622a8b0bbf2c833fa2d969417af
|
|
When installing a package, we should have /tmp and /cache mounted and
nothing else. Ensure this is true by explicitly mounting them and
unmounting everything else as the first step of every install.
Also fix an error in the progress bar that crops up when you do
multiple package installs in one instance of recovery.
Change-Id: I4837ed707cb419ddd3d9f6188b6355ba1bcfe2b2
|
|
Recovery currently has a random mix of messages printed to stdout and
messages printed to stderr, which can make logs hard to read. Move
everything to stdout.
Change-Id: Ie33bd4a9e1272e731302569cdec918e0534c48a6
|
|
Change-Id: Ifd5a29d459acf101311fa1c220f728c3d0ac2e4e
|
|
Improves license compatibility between GPL and Apache
Change-Id: I2b165aa575bb6213af6b07936f99610c113443f0
|
|
Add an option to verifier_test to load keys from a file, the way the
recovery does.
Change-Id: Icba0e391164f2c1a9fefeab4b0bcb878e91d17b4
|
|
Move TW zip install code to C++ so that it can use the
ui->functions.
Bring in mincrypt code to fix a crash during signature
checking.
|
|
|
|
- recovery takes a --locale argument, which will be passed by the main
system
- the locale is saved in cache, in case the --locale argument is
missing (eg, when recovery is started from fastboot)
- we include images that have prerendered text for many locales
- we split the background states into four (installing update,
erasing, no command, error) so that appropriate text can be shown.
Change-Id: I731b8108e83d5ccc09a4aacfc1dbf7e86b397aaf
|
|
Change-Id: I9849c69777d513bb12926c8c622d1c12d2da568a
|
|
- add the --just_exit option to make recovery exit normally without doing anything
- make it possible to build updater extensions in C++
- add the clear_display command so that the updater binary can request
recovery switch to the NONE background UI
These are all used to support the notion of using OTA as a factory
reflash mechanism.
Change-Id: Ib00d1cbf540feff38f52a61a2cf198915b48488c
|
|
Move all the functions in ui.c to be members of a ScreenRecoveryUI
class, which is a subclass of an abstract RecoveryUI class. Recovery
then creates a global singleton instance of this class and then invoke
the methods to drive the UI. We use this to allow substitution of a
different RecoveryUI implementation for devices with radically
different form factors (eg, that don't have a screen).
Change-Id: I76bdd34eca506149f4cc07685df6a4890473f3d9
|
|
Change-Id: I423a23581048d451d53eef46e5f5eac485b77555
|
|
Change-Id: I68a67a4c8edec9a74463b3d4766005ce27b51316
|
|
updater now has a function "wipe_cache();" which causes recovery to
wipe the cache partition after the successful installation of the
package. Move log copying around a bit so logs and the last_install
flag file are copied to cache after it's wiped.
Bug: 5314244
Change-Id: Id35a9eb6dcd626c8f3a3a0076074f462ed3d44bd
|
|
When installing a package, create /cache/recovery/last_install, which
contains the filename of the package and a 1 or 0 for success or
failure.
Also, don't mount ext4 and vfat filesystems as read-only (on devices
where /cache is ext4, we need it to be read-write).
Change-Id: I0cf2a1921bbd65e06343aa74e2006577fac77c2c
|
|
Remove the wacky notion of "roots" and "root paths" (those things that
look like "FOO:some/path" instead of just "/foo/some/path"). Let each
device specify its own table of available partitions and how to mount
them (needed for devices that use both MTD/yaffs2 and EMMC/ext4
partitions).
(Cherrypicked from gingerbread w/slight edits.)
Change-Id: I2479ce76b13e73f1d12035c89386c3a82b3edf51
|
|
Remove the wacky notion of "roots" and "root paths" (those things that
look like "FOO:some/path" instead of just "/foo/some/path"). Let each
device specify its own table of available partitions and how to mount
them (needed for devices that use both MTD/yaffs2 and EMMC/ext4
partitions).
Change-Id: I18b0a572a71c5e087e0b7ae11b1774388339bfd1
|
|
Recovery itself no longer needs to access all these partitions;
manipulation of them is done by the updater binary. This is a small
first step towards removing roots entirely.
Change-Id: I3fbcada32079a37db4cc097861dfa91e0a08da30
|
|
Make the mount and format functions take extra parameters describing
the filesystem type and add support for mounting and formatting ext4
filesystems on EMMC.
Change recovery to consistently use stdout for status messages instead
of mixing stdout and stderr.
|
|
Close the update package before invoking the binary, to allow the
installer to unmount /cache if it wants to. Add a function to allow
remounting of a mount as read-only.
Change-Id: Idfcc96c3da66083295177f729263560be58034e4
|
|
Make the mount and format functions take extra parameters describing
the filesystem type and add support for mounting and formatting ext4
filesystems on EMMC.
Change recovery to consistently use stdout for status messages instead
of mixing stdout and stderr.
|
|
Fix potential string format bug.
Change-Id: Ie05aac53b2c45a48bd68e340b76ccb21edfd28b7
|
|
Remove support for the HTC-specific "firmware" update command and the
corresponding edify function write_firmware_update(). This
functionality is now done by an edify extension library that lives in
vendor/htc.
Change-Id: I80858951ff10ed8dfff98aefb796bef009e05efb
|
|
%i can't be used to read unsigned ints (though it happens to work with
bionic). Change to %x and %u as appropriate.
Change-Id: I8ea9ca16a939501757cf70fc5953abee26c8231c
http://b/2402231 - Parser for /res/keys interprets n0inv as a signed int
|
|
|
|
|
|
In recovery, verify a signature that covers the entire zip file,
instead of using the jarsigner format to verify individual files.
Bug: 1328985
|
|
Yank all the code to install OTA packages out of the recovery binary
itself. Now packages are installed by a binary included in the
package (run as a child of recovery), so we can make improvements in
the installation process without waiting for a new release to use
them.
|
|
Let recovery accept set_progress commands to control progress over the
'current segment' of the bar. Add a set_progress() builtin to the
updater binary.
|
|
To do a firmware-install-on-reboot, the update binary tells recovery
what file to install before rebooting. Let this file be specified as
"PACKAGE:<foo>" to indicate taking the file out of the OTA package,
avoiding an extra copy to /tmp. Bump the API version number to
reflect this change.
|
|
A few more changes to edify:
- fix write_raw_image(); my last change neglected to close the write
context, so the written image was corrupt.
- each expression tracks the span of the source code from which it
was compiled, so that assert()'s error message can include the
source of the expression that failed.
- the 'cookie' argument to each Function is replaced with a State
object, which contains the cookie, the source script (for use with
the above spans), and the current error message (replacing the
global variables that were used for this purpose).
- in the recovery image, a new command "ui_print" can be sent back
through the command pipe to cause text to appear on the screen.
Add a new ui_print() function to print things from scripts.
Rename existing "print" function to "stdout".
|
|
Adds more edify functions for OTAs:
is_mounted getprop apply_patch apply_patch_check apply_patch_space
write_raw_image write_firmware_image package_extract_file
This allows us to install radios, hboots, boot images, and install
incremental OTA packages.
Fixes a couple of dumb bugs in edify itself:
- we were doubling the size of the function table each time it was
*not* full, rather than each time it was full
- "no such function" errors weren't visible to the parser, so they
didn't prevent execution of the script.
|
|
Adds the following edify functions:
mount unmount format show_progress delete delete_recursive
package_extract symlink set_perm set_perm_recursive
This set is enough to extract and install the system part of a (full)
OTA package.
Adds the updater binary that extracts an edify script from the OTA
package and then executes it. Minor changes to the edify core (adds a
sleep() builtin for debugging, adds "." to the set of characters that
can appear in an unquoted string).
|
|
Allow installation of OTA packages which do not contain an
update-script, but instead contain an update-binary.
|
|
Change the recovery UI so that when there is a hboot or radio update
pending (which the user most do a home+back reboot to actually
install), the UI tells them so, instead of saying "Install from sdcard
complete."
|
|
them from an external file in the recovery image. Use the
test-keys for all builds.
Original author: dougz
Merged from: //branches/donutburger/...
Automated import of CL 144132
|
|
them from an external file in the recovery image. Use the
test-keys for all builds.
Automated import of CL 144130
|
|
|
|
|
