diff options
Diffstat (limited to '')
| -rw-r--r-- | Android.mk | 1 | ||||
| -rw-r--r-- | bmlutils/bmlutils.c | 2 | ||||
| -rw-r--r-- | extra-functions.c | 57 | ||||
| -rw-r--r-- | extra-functions.h | 9 | ||||
| -rw-r--r-- | gui/action.cpp | 72 | ||||
| -rw-r--r-- | partition.cpp | 10 | ||||
| -rw-r--r-- | partitionmanager.cpp | 144 | ||||
| -rw-r--r-- | partitions.hpp | 2 | ||||
| -rw-r--r-- | prebuilt/Android.mk | 9 | ||||
| -rw-r--r-- | prebuilt/sdparted | 658 | ||||
| -rw-r--r-- | recovery.cpp | 1 | ||||
| -rw-r--r-- | twinstall.cpp | 5 |
12 files changed, 150 insertions, 820 deletions
diff --git a/Android.mk b/Android.mk index bd4902d39..3734330ea 100644 --- a/Android.mk +++ b/Android.mk @@ -29,7 +29,6 @@ LOCAL_SRC_FILES := \ adb_install.cpp LOCAL_SRC_FILES += \ - extra-functions.c \ data.cpp \ makelist.cpp \ partition.cpp \ diff --git a/bmlutils/bmlutils.c b/bmlutils/bmlutils.c index 6971b7640..54b67f513 100644 --- a/bmlutils/bmlutils.c +++ b/bmlutils/bmlutils.c @@ -19,9 +19,7 @@ #include <signal.h> #include <sys/wait.h> -#include "../extra-functions.h" -//extern int __system(const char *command); #define BML_UNLOCK_ALL 0x8A29 ///< unlock all partition RO -> RW #ifndef BOARD_BML_BOOT diff --git a/extra-functions.c b/extra-functions.c deleted file mode 100644 index 3735472a3..000000000 --- a/extra-functions.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include <errno.h> -#include <fcntl.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <sys/stat.h> -#include <sys/types.h> -#include <sys/wait.h> -#include <unistd.h> -#include <linux/input.h> - -#include "bootloader.h" -#include "common.h" -#include "extra-functions.h" -#include "data.h" -#include "variables.h" - -void run_script(const char *str1, const char *str2, const char *str3, const char *str4, const char *str5, const char *str6, const char *str7, int request_confirm) -{ - ui_print("%s", str1); - ui_print("%s", str2); - pid_t pid = fork(); - if (pid == 0) { - char *args[] = { "/sbin/sh", "-c", (char*)str3, "1>&2", NULL }; - execv("/sbin/sh", args); - fprintf(stderr, str4, strerror(errno)); - _exit(-1); - } - int status; - while (waitpid(pid, &status, WNOHANG) == 0) { - ui_print("."); - sleep(1); - } - ui_print("\n"); - if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) { - ui_print("%s", str5); - } else { - ui_print("%s", str6); - } -} - diff --git a/extra-functions.h b/extra-functions.h deleted file mode 100644 index 082b806b0..000000000 --- a/extra-functions.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _EXTRAFUNCTIONS_HEADER -#define _EXTRAFUNCTIONS_HEADER - -#include "mincrypt/rsa.h" -#include "minzip/Zip.h" - -void run_script(const char *str1, const char *str2, const char *str3, const char *str4, const char *str5, const char *str6, const char *str7, int request_confirm); - -#endif // _EXTRAFUNCTIONS_HEADER diff --git a/gui/action.cpp b/gui/action.cpp index 4c3d88ed3..afa52d1f8 100644 --- a/gui/action.cpp +++ b/gui/action.cpp @@ -29,7 +29,6 @@ extern "C" { #include "../common.h" #include "../minuitwrp/minui.h" #include "../recovery_ui.h" -#include "../extra-functions.h" #include "../variables.h" #include "../twinstall.h" @@ -825,6 +824,7 @@ int GUIAction::doAction(Action action, int isThreaded /* = 0 */) if (function == "partitionsd") { operation_start("Partition SD Card"); + int ret_val = 0; if (simulate) { simulate_progress_bar(); @@ -834,75 +834,11 @@ int GUIAction::doAction(Action action, int isThreaded /* = 0 */) if (allow_partition == 0) { ui_print("This device does not have a real SD Card!\nAborting!\n"); } else { - // Below seen in Koush's recovery - char sddevice[256]; - char mkdir_path[255]; -#ifdef TW_EXTERNAL_STORAGE_PATH - TWPartition* SDCard = PartitionManager.Find_Partition_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH)); -#else - TWPartition* SDCard = PartitionManager.Find_Partition_By_Path("/sdcard"); -#endif - if (SDCard == NULL) { - LOGE("Unable to locate device to partition.\n"); - operation_end(1, simulate); - return 0; - } - strcpy(sddevice, SDCard->Actual_Block_Device.c_str()); - // Just need block not whole partition - sddevice[strlen("/dev/block/mmcblkX")] = '\0'; - - char es[64]; - std::string ext_format, sd_path; - int ext, swap; - DataManager::GetValue("tw_sdext_size", ext); - DataManager::GetValue("tw_swap_size", swap); - DataManager::GetValue("tw_sdpart_file_system", ext_format); - sprintf(es, "/sbin/sdparted -es %dM -ss %dM -efs ext3 -s > /cache/part.log",ext,swap); - LOGI("\nrunning script: %s\n", es); - run_script("\nContinue partitioning?", - "\nPartitioning sdcard : ", - es, - "\nunable to execute parted!\n(%s)\n", - "\nOops... something went wrong!\nPlease check the recovery log!\n", - "\nPartitioning complete!\n\n", - "\nPartitioning aborted!\n\n", 0); - - // recreate TWRP folder and rewrite settings - these will be gone after sdcard is partitioned -#ifdef TW_EXTERNAL_STORAGE_PATH - PartitionManager.Mount_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH), 1); - DataManager::GetValue(TW_EXTERNAL_PATH, sd_path); - memset(mkdir_path, 0, sizeof(mkdir_path)); - sprintf(mkdir_path, "%s/TWRP", sd_path.c_str()); -#else - PartitionManager.Mount_By_Path("/sdcard", 1); - strcpy(mkdir_path, "/sdcard/TWRP"); -#endif - mkdir(mkdir_path, 0777); - DataManager::Flush(); -#ifdef TW_EXTERNAL_STORAGE_PATH - DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH)); - if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1) - DataManager::SetValue(TW_ZIP_LOCATION_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH)); -#else - DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, "/sdcard"); - if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1) - DataManager::SetValue(TW_ZIP_LOCATION_VAR, "/sdcard"); -#endif - // This is sometimes needed to make a healthy ext4 partition - if (ext > 0 && strcmp(ext_format.c_str(), "ext4") == 0) { - char command[256]; - LOGE("Fix this format command!\n"); - //sprintf(command, "mke2fs -t ext4 -m 0 %s", sde.blk); - ui_print("Formatting sd-ext as ext4...\n"); - LOGI("Formatting sd-ext after partitioning, command: '%s'\n", command); - system(command); - ui_print("DONE\n"); - } - - PartitionManager.Update_System_Details(); + if (!PartitionManager.Partition_SDCard()) + ret_val = 1; // failed } } - operation_end(0, simulate); + operation_end(ret_val, simulate); return 0; } if (function == "installhtcdumlock") diff --git a/partition.cpp b/partition.cpp index 12e1f5339..633011ba6 100644 --- a/partition.cpp +++ b/partition.cpp @@ -624,14 +624,6 @@ bool TWPartition::Find_Partition_Size(void) { return false; } -void TWPartition::Flip_Block_Device(void) { - string temp; - - temp = Alternate_Block_Device; - Primary_Block_Device = Alternate_Block_Device; - Alternate_Block_Device = temp; -} - bool TWPartition::Is_Mounted(void) { if (!Can_Be_Mounted) return false; @@ -670,6 +662,7 @@ bool TWPartition::Mount(bool Display_Error) { LOGE("Unable to mount '%s'\n", Mount_Point.c_str()); else LOGI("Unable to mount '%s'\n", Mount_Point.c_str()); + LOGI("Actual block device: '%s', current file system: '%s'\n", Actual_Block_Device.c_str(), Current_File_System.c_str()); return false; } else { if (Removable) @@ -1349,7 +1342,6 @@ void TWPartition::Find_Actual_Block_Device(void) { Is_Present = true; Actual_Block_Device = Primary_Block_Device; } else if (!Alternate_Block_Device.empty() && TWFunc::Path_Exists(Alternate_Block_Device)) { - Flip_Block_Device(); Actual_Block_Device = Primary_Block_Device; Is_Present = true; } else diff --git a/partitionmanager.cpp b/partitionmanager.cpp index ee199eb85..98ba462c2 100644 --- a/partitionmanager.cpp +++ b/partitionmanager.cpp @@ -1684,3 +1684,147 @@ void TWPartitionManager::Mount_All_Storage(void) { (*iter)->Mount(false); } } + +int TWPartitionManager::Partition_SDCard(void) { + char mkdir_path[255], temp[255], line[512]; + string Command, Device, fat_str, ext_str, swap_str, start_loc, end_loc, ext_format, sd_path, tmpdevice; + int ext, swap, total_size = 0, fat_size; + FILE* fp; + + ui_print("Partitioning SD Card...\n"); +#ifdef TW_EXTERNAL_STORAGE_PATH + TWPartition* SDCard = Find_Partition_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH)); +#else + TWPartition* SDCard = Find_Partition_By_Path("/sdcard"); +#endif + if (SDCard == NULL) { + LOGE("Unable to locate device to partition.\n"); + return false; + } + if (!SDCard->UnMount(true)) + return false; + TWPartition* SDext = Find_Partition_By_Path("/sd-ext"); + if (SDext != NULL) { + if (!SDext->UnMount(true)) + return false; + } + system("umount \"$SWAPPATH\""); + Device = SDCard->Actual_Block_Device; + // Just use the root block device + Device.resize(strlen("/dev/block/mmcblkX")); + + // Find the size of the block device: + fp = fopen("/proc/partitions", "rt"); + if (fp == NULL) { + LOGE("Unable to open /proc/partitions\n"); + return false; + } + + while (fgets(line, sizeof(line), fp) != NULL) + { + unsigned long major, minor, blocks; + char device[512]; + char tmpString[64]; + + if (strlen(line) < 7 || line[0] == 'm') continue; + sscanf(line + 1, "%lu %lu %lu %s", &major, &minor, &blocks, device); + + tmpdevice = "/dev/block/"; + tmpdevice += device; + if (tmpdevice == Device) { + // Adjust block size to byte size + total_size = (int)(blocks * 1024ULL / 1000000LLU); + break; + } + } + fclose(fp); + + DataManager::GetValue("tw_sdext_size", ext); + DataManager::GetValue("tw_swap_size", swap); + DataManager::GetValue("tw_sdpart_file_system", ext_format); + fat_size = total_size - ext - swap; + LOGI("sd card block device is '%s', sdcard size is: %iMB, fat size: %iMB, ext size: %iMB, ext system: '%s', swap size: %iMB\n", Device.c_str(), total_size, fat_size, ext, ext_format.c_str(), swap); + memset(temp, 0, sizeof(temp)); + sprintf(temp, "%i", fat_size); + fat_str = temp; + memset(temp, 0, sizeof(temp)); + sprintf(temp, "%i", fat_size + ext); + ext_str = temp; + memset(temp, 0, sizeof(temp)); + sprintf(temp, "%i", fat_size + ext + swap); + swap_str = temp; + if (ext + swap > total_size) { + LOGE("EXT + Swap size is larger than sdcard size.\n"); + return false; + } + ui_print("Removing partition table...\n"); + Command = "parted -s " + Device + " mklabel msdos"; + LOGI("Command is: '%s'\n", Command.c_str()); + if (system(Command.c_str()) != 0) { + LOGE("Unable to remove partition table.\n"); + Update_System_Details(); + return false; + } + ui_print("Creating FAT32 partition...\n"); + Command = "parted " + Device + " mkpartfs primary fat32 0 " + fat_str + "MB"; + LOGI("Command is: '%s'\n", Command.c_str()); + if (system(Command.c_str()) != 0) { + LOGE("Unable to create FAT32 partition.\n"); + return false; + } + if (ext > 0) { + ui_print("Creating EXT partition...\n"); + Command = "parted " + Device + " mkpartfs primary ext2 " + fat_str + "MB " + ext_str + "MB"; + LOGI("Command is: '%s'\n", Command.c_str()); + if (system(Command.c_str()) != 0) { + LOGE("Unable to create EXT partition.\n"); + Update_System_Details(); + return false; + } + } + if (swap > 0) { + ui_print("Creating swap partition...\n"); + Command = "parted " + Device + " mkpartfs primary linux-swap " + ext_str + "MB " + swap_str + "MB"; + LOGI("Command is: '%s'\n", Command.c_str()); + if (system(Command.c_str()) != 0) { + LOGE("Unable to create swap partition.\n"); + Update_System_Details(); + return false; + } + } + // recreate TWRP folder and rewrite settings - these will be gone after sdcard is partitioned +#ifdef TW_EXTERNAL_STORAGE_PATH + Mount_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH), 1); + DataManager::GetValue(TW_EXTERNAL_PATH, sd_path); + memset(mkdir_path, 0, sizeof(mkdir_path)); + sprintf(mkdir_path, "%s/TWRP", sd_path.c_str()); +#else + Mount_By_Path("/sdcard", 1); + strcpy(mkdir_path, "/sdcard/TWRP"); +#endif + mkdir(mkdir_path, 0777); + DataManager::Flush(); +#ifdef TW_EXTERNAL_STORAGE_PATH + DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH)); + if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1) + DataManager::SetValue(TW_ZIP_LOCATION_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH)); +#else + DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, "/sdcard"); + if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1) + DataManager::SetValue(TW_ZIP_LOCATION_VAR, "/sdcard"); +#endif + if (ext > 0) { + if (SDext == NULL) { + LOGE("Unable to locate sd-ext partition.\n"); + return false; + } + Command = "mke2fs -t " + ext_format + " -m 0 " + SDext->Actual_Block_Device; + ui_print("Formatting sd-ext as %s...\n", ext_format.c_str()); + LOGI("Formatting sd-ext after partitioning, command: '%s'\n", Command.c_str()); + system(Command.c_str()); + } + + Update_System_Details(); + ui_print("Partitioning complete.\n"); + return true; +}
\ No newline at end of file diff --git a/partitions.hpp b/partitions.hpp index bb8f621eb..d55fec431 100644 --- a/partitions.hpp +++ b/partitions.hpp @@ -116,7 +116,6 @@ private: void Find_Real_Block_Device(string& Block_Device, bool Display_Error); // Checks the block device given and follows symlinks until it gets to the real block device bool Find_Partition_Size(); // Finds the partition size from /proc/partitions unsigned long long Get_Size_Via_du(string Path, bool Display_Error); // Uses du to get sizes - void Flip_Block_Device(); // Flips the Block_Device and Alternate_Block_Device bool Wipe_EXT23(); // Formats as ext3 or ext2 bool Wipe_EXT4(); // Formats using ext4, uses make_ext4fs when present bool Wipe_FAT(); // Formats as FAT except that mkdosfs from busybox usually fails so oftentimes this is actually a rm -rf wipe @@ -182,6 +181,7 @@ public: virtual int usb_storage_enable(void); // Enable USB storage mode virtual int usb_storage_disable(void); // Disable USB storage mode virtual void Mount_All_Storage(void); // Mounts all storage locations + virtual int Partition_SDCard(void); // Repartitions the sdcard private: bool Make_MD5(bool generate_md5, string Backup_Folder, string Backup_Filename); // Generates an MD5 after a backup is made diff --git a/prebuilt/Android.mk b/prebuilt/Android.mk index 650a6a057..4796d06ff 100644 --- a/prebuilt/Android.mk +++ b/prebuilt/Android.mk @@ -116,15 +116,6 @@ ifeq ($(BOARD_HAS_NO_REAL_SDCARD),) LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/sbin LOCAL_SRC_FILES := $(LOCAL_MODULE) include $(BUILD_PREBUILT) - - #sdparted - include $(CLEAR_VARS) - LOCAL_MODULE := sdparted - LOCAL_MODULE_TAGS := eng - LOCAL_MODULE_CLASS := RECOVERY_EXECUTABLES - LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/sbin - LOCAL_SRC_FILES := $(LOCAL_MODULE) - include $(BUILD_PREBUILT) endif ifeq ($(TW_INCLUDE_DUMLOCK), true) diff --git a/prebuilt/sdparted b/prebuilt/sdparted deleted file mode 100644 index 730d5dc34..000000000 --- a/prebuilt/sdparted +++ /dev/null @@ -1,658 +0,0 @@ -#!/sbin/sh - -# do logging, if not excluded with -x -LOGFILE="/data/sdparted.log" -[ "$1" != "-x" ] && echo "$0" "$@" >> "$LOGFILE" && "$0" -x "$@" 2>&1 | tee -a "$LOGFILE" && exit -shift - -ShowError() { echo ; echo " err: $1" ; echo ; exit 1 ; } - -ShowMessage() { echo ; echo " msg: $1" ; } - -ShowHelp() { - -cat <<DONEHELP - -$SCRIPTNAME v$SCRIPTREV created by $MYNAME - -if you use this script in your work, please give some credit. thanks. - -requirements: cm-recovery-v1.4 - -usage: $SCRIPTNAME [options] - - -options: - - --fatsize|-fs SIZE[MG] set the size of the fat32 partition to <SIZE>. - default=total sdcard size - (ext + swap) - - --extsize|-es SIZE[MG] set the size of the ext partition to <SIZE>. - default=$EXTSIZE - - --swapsize|-ss SIZE[MG] set the size of the swap partition to <SIZE>. - if set to 0, no swap partition will be created. - default=$SWAPSIZE - - --extfs|-efs TYPE set the filesystem of ext partition to <TYPE>. - valid types=ext2, ext3, ext4 - default=$EXTFS - - - --upgradefs|-ufs TYPE upgrades existing ext partition to <TYPE>. - this operation will NOT wipe your sdcard and - cannot be used with any partition creation options. - valid types=ext3, ext4 - - --downgradefs|-dfs TYPE downgrades existing ext partition to <TYPE>. - this operation will NOT wipe your sdcard and - cannot be used with any partition creation options. - valid types=ext2 - - - --interactive|-i interactive mode - - --help|-h display this help - - --printonly|-po display sdcard information - - --silent|-s do not prompt user, not even initial warning. - - -examples: - $SCRIPTNAME creates swap=$SWAPSIZE ext2=$EXTSIZE fat32=remaining free space - $SCRIPTNAME -efs ext4 creates swap=$SWAPSIZE ext4=$EXTSIZE fat32=remaining free space - $SCRIPTNAME -fs 1.5G -efs ext3 creates swap=$SWAPSIZE ext3=$EXTSIZE fat32=1536 - $SCRIPTNAME -es 256M -ss 0 creates no swap ext2=256 fat32=remaining free space - $SCRIPTNAME -ufs ext4 upgrades ext partition to ext4 - -DONEHELP - -} - -UserAbort() { - - WHILEEXIT= - - while [ -z "$WHILEEXIT" ] - do - echo -n "do you want to continue? (Y/n) " - read response - echo - [ "$response" = "Y" ] || [ "$response" = "n" ] || [ "$response" = "N" ] && WHILEEXIT="$response" - done - - echo "$response" > /dev/null 2>&1 >>"$LOGFILE" - - [ "$response" != "Y" ] - -} - -UnmountAll () { - - # unmount all partitions so we can work with $SDPATH - # i'm assuming no more than 3 partitions - # maybe make a little more elegant later - echo -n "unmounting all partitions..." - umount "$FATPATH" > /dev/null 2>&1 >>"$LOGFILE" - umount "$EXTPATH" > /dev/null 2>&1 >>"$LOGFILE" - umount "$SWAPPATH" > /dev/null 2>&1 >>"$LOGFILE" - echo "done" - echo - -} - - -CheckReqs() { - - echo -n "checking script requirements..." - # check for valid sdcard - [ -e $SDPATH ] || ShowError "$SDPATH does not exist!" - - # look for necessary programs - [ -e $CMPARTED ] || ShowError "$CMPARTED does not exist!" - [ -e $CMTUNE2FS ] || ShowError "$CMTUNE2FS does not exist!" - [ -e $CME2FSCK ] || ShowError "$CME2FSCK does not exist!" - - # verify cm-v1.4 - PARTEDREV=`"$CMPARTED" "$SDPATH" version | grep Parted | cut -d" " -f3` - [ "$PARTEDREV" == "1.8.8.1.179-aef3" ] || ShowError "you are not using parted v1.8.8.1.179-aef3!" - echo "done" - echo - -} - -CheckTableType() { - - TABLETYPE=`"$CMPARTED" "$SDPATH" print | grep Table: | cut -d" " -f3` - - [ "$TABLETYPE" == "loop" -o "$TABLETYPE" == "msdos" ] && TTISOK=1 || TTISOK=0 - [ "$TABLETYPE" == "loop" ] && TTISLOOP=1 || TTISLOOP=0 - [ "$TABLETYPE" == "msdos" ] && TTISMSDOS=1 || TTISMOSDOS=0 - -} - -ValidateExtArg() { - - FUNC_RET="nonzero" - - # validating argument - [ "$1" != "ext2" ] && [ "$1" != "ext3" ] && [ "$1" != "ext4" ] && FUNC_RET= - - [ -z "$FUNC_RET" ] && [ -z "$IMODE" ] && ShowError "$1 is not a valid filesystem." - [ -z "$FUNC_RET" ] && [ -n "$IMODE" ] && ShowMessage "$1 is not a valid filesystem." - - # return valid argument - [ -n "$FUNC_RET" ] && FUNC_RET="$1" - -} - -ValidateSizeArg() { - - # check for zero-length arg to protect expr length - [ -z "$1" ] && ShowError "zero-length argument passed to size-validator" - - SIZEMB= - ARGLEN=`expr length $1` - SIZELEN=$(($ARGLEN-1)) - SIZEARG=`expr substr $1 1 $SIZELEN` - SIZEUNIT=`expr substr $1 $ARGLEN 1` - - # check if SIZEARG is an integer - if [ $SIZEARG -eq $SIZEARG 2> /dev/null ] ; then - # look for G - [ "$SIZEUNIT" == "G" ] && SIZEMB=$(($SIZEARG * 1024)) - # look for M - [ "$SIZEUNIT" == "M" ] && SIZEMB=$SIZEARG - # no units on arg AND prevents using bogus size units - [ -z "$SIZEMB" ] && [ $SIZEUNIT -eq $SIZEUNIT 2> /dev/null ] && SIZEMB=$1 - # check if SIZEARG is a floating point number, GB only - elif [ `expr index "$SIZEARG" .` != 0 ] && [ "$SIZEUNIT" == "G" ] ; then - INT=`echo "$SIZEARG" | cut -d"." -f1` - FRAC=`echo "$SIZEARG" | cut -d"." -f2` - SIGDIGITS=`expr length $FRAC` - - [ -z "$INT" ] && INT=0 - INTMB=$(($INT * 1024)) - FRACMB=$((($FRAC * 1024) / (10**$SIGDIGITS))) - SIZEMB=$(($INTMB + $FRACMB)) - # it's not a valid size - else - [ -z "$IMODE" ] && ShowError "$1 is not a valid size" - fi - - [ -z "$SIZEMB" ] && [ -n "$IMODE" ] && ShowMessage "$1 is not a valid size" - - # return valid argument in MB - FUNC_RET=$SIZEMB - -} - -CalculatePartitions() { - - # get size of sdcard in MB & do some math - SDSIZEMB=`"$CMPARTED" "$SDPATH" unit MB print | grep $SDPATH | cut -d" " -f3` - SDSIZE=${SDSIZEMB%MB} - [ -n "$FATSIZE" ] || FATSIZE=$(($SDSIZE - $EXTSIZE - $SWAPSIZE)) - EXTEND=$(($FATSIZE + $EXTSIZE)) - SWAPEND=$(($EXTEND + $SWAPSIZE)) - - # check for fatsize of 0 - [ $FATSIZE -le 0 ] && ShowError "must have a fat32 partition greater than 0MB" - - # check for zero-length sdsize... - # indicative of parted not reporting length - # correctly b/c of error on sdcard - [ -z "$SDSIZE" ] && ShowError "zero-length argument passed to partition-calculator" - - # make sure we're not being asked to do the impossible - [ $(($FATSIZE + $EXTSIZE + $SWAPSIZE)) -gt $SDSIZE ] && [ -z "$IMODE" ] && ShowError "sum of requested partitions is greater than sdcard size" - -} - - -UpgradeDowngradeOnly() { - - if [ -n "$UEXTFSONLY" ] ; then - echo - [ -n "$CREATEPART" ] && ShowError "cannot use upgrade option when creating partitions, use -efs instead" - [ -n "$DEXTFSONLY" ] && ShowError "cannot upgrade AND downgrade, it just doesn't make sense" - echo "you have chosen to upgrade $EXTPATH to $UEXTFSONLY." - echo "this action will NOT delete any data from sdcard." - echo - [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user" - echo - UpgradeExt "$UEXTFSONLY" - ShowCardInfo - elif [ -n "$DEXTFSONLY" ] ; then - echo - [ -n "$CREATEPART" ] && ShowError "cannot use downgrade option when creating partitions." - [ -n "$UEXTFSONLY" ] && ShowError "cannot downgrade AND upgrade, it just doesn't make sense." - echo "you have chosen to downgrade $EXTPATH to $DEXTFSONLY." - echo "this action will NOT delete any data from sdcard." - echo - [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user" - echo - DowngradeExt "$DEXTFSONLY" - ShowCardInfo - fi - -} - -PrepareSdCard() { - - echo - if [ $TTISOK -eq 0 ] ; then - echo "partition 1 may not be aligned to cylinder boundaries." - echo "to continue, this must be corrected." - elif [ $TTISLOOP -gt 0 ] ; then - echo "your sdcard's partition table type is $TABLETYPE." - echo "to continue, partition table must be set to 'msdos'." - elif [ $TTISMSDOS -gt 0 ] ; then - # just a reminder..in a later version, - # i may implement resizing of partitions, - # so this will be unnecessary. but until then... - echo "to continue, all existing partitions must be removed." - else - # this is not good, and should never happen - # if it does, there is a serious problem - ShowError "sdcard failed table type check." - fi - - echo - echo "this action will remove all data from your sdcard." - echo - [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user" - - [ $TTISOK -eq 0 ] && echo -n "correcting cylinder boundaries..." - [ $TTISLOOP -gt 0 ] && echo -n "setting partition table to msdos..." - [ $TTISMSDOS -gt 0 ] && echo -n "removing all partitions..." - - "$CMPARTED" -s "$SDPATH" mklabel msdos 2>&1 >>"$LOGFILE" - echo "done" - echo - -} - -ShowActions() { - - echo - echo "total size of sdcard=$SDSIZEMB" - echo - echo "the following actions will be performed:" - echo " -create $FATSIZE""MB fat32 partition" - [ $EXTSIZE -gt 0 ] && echo " -create $EXTSIZE""MB ext2 partition" - [ $SWAPSIZE -gt 0 ] && echo " -create $SWAPSIZE""MB swap partition" - [ "$EXTFS" != "ext2" ] && echo " -ext2 partition will be upgraded to $EXTFS" - echo - [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user" - echo - -} - -ShowCardInfo() { - - echo "sddevice located in /sdcard/sddev.log" - echo $SDPATH > /sdcard/sddev.log - - CheckTableType - - echo - echo "retrieving current sdcard information..." - - if [ $TTISOK -gt 0 ] ; then - echo - parted "$SDPATH" print - echo - echo "script log is located @ /data/sdparted.log" - exit 0 - else - echo - echo "partition 1 may not be aligned to cylinder boundaries." - ShowError "cannot complete print operation." - fi - echo - -} - - -PartitionSdCard() { - - echo "performing selected actions..." - echo - - if [ $FATSIZE -gt 0 ] ; then - echo -n "creating fat32 partition..." - "$CMPARTED" -s "$SDPATH" mkpartfs primary fat32 0 "$FATSIZE"MB 2>&1 >>"$LOGFILE" - echo "done" - fi - - if [ $EXTSIZE -gt 0 ] ; then - echo -n "creating ext2 partition..." - "$CMPARTED" -s "$SDPATH" mkpartfs primary ext2 "$FATSIZE"MB "$EXTEND"MB 2>&1 >>"$LOGFILE" - "$CMTUNE2FS" -L sd-ext "$EXTPATH" 2>&1 >>"$LOGFILE" - echo "done" - fi - - if [ $SWAPSIZE -gt 0 ] ; then - echo -n "creating swap partition..." - "$CMPARTED" -s "$SDPATH" mkpartfs primary linux-swap "$EXTEND"MB "$SWAPEND"MB 2>&1 >>"$LOGFILE" - echo "done" - fi - echo - -} - -UpgradeExt() { - - # check for no upgrade - [ "$1" == "ext2" ] && return - # check for ext partition - [ ! -e "$EXTPATH" ] && ShowError "$EXTPATH does not exist" - - # have to use -m switch for this check b/c parted incorrectly - # reports all ext partitions as ext2 when running print <number> - CHECKEXTFS=`"$CMPARTED" -m "$SDPATH" print | grep ext | cut -d":" -f5` - [ "$CHECKEXTFS" == "$1" ] && ShowError "$EXTPATH is already $1" - - # grabbed the code bits for ext3 from upgrade_fs(credit:cyanogen) - # check for ext2...must upgrade to ext3 first b4 ext4 - if [ "$1" == "ext3" -o "$1" == "ext4" ] ; then - echo -n "adding journaling to $EXTPATH..." - umount /system/sd > /dev/null 2>&1 >>"$LOGFILE" - "$CME2FSCK" -p "$EXTPATH" 2>&1 >>"$LOGFILE" - "$CMTUNE2FS" -c0 -i0 -j "$EXTPATH" 2>&1 >>"$LOGFILE" - echo "done" - fi - - # and got convert to ext4 from xda-forum(credit:Denkai) - if [ "$1" == "ext4" ] ; then - echo -n "converting $EXTPATH to ext4 filesystem..." - umount /system/sd > /dev/null 2>&1 >>"$LOGFILE" - "$CMTUNE2FS" -O extents,uninit_bg,dir_index "$EXTPATH" 2>&1 >>"$LOGFILE" - "$CME2FSCK" -fpDC0 "$EXTPATH" 2>&1 >>"$LOGFILE" - echo "done" - fi - echo - -} - -DowngradeExt() { - - # check for ext partition - [ ! -e "$EXTPATH" ] && ShowError "$EXTPATH does not exist" - - # have to use print for this check b/c parted incorrectly - # reports all ext partitions as ext2 when running print <number> - CHECKEXTFS=`"$CMPARTED" -m "$SDPATH" print | grep ext | cut -d":" -f5` - [ "$CHECKEXTFS" == "$1" ] && ShowError "$EXTPATH is already $1" - - if [ "$CHECKEXTFS" == "ext4" -o "$1" == "ext3" ] ; then - # interweb says downgrading from ext4 is not possible - # without a backup/restore procedure. - # if i figure it out, i'll implement it. - ShowError "downgrading from ext4 is not currently supported" - fi - - if [ "$1" == "ext2" ] ; then - echo -n "removing journaling from $EXTPATH..." - umount /system/sd > /dev/null 2>&1 >>"$LOGFILE" - "$CMTUNE2FS" -O ^has_journal "$EXTPATH" 2>&1 >>"$LOGFILE" - "$CME2FSCK" -fp "$EXTPATH" 2>&1 >>"$LOGFILE" - echo "done" - fi - echo - -} - - -Interactive() { - -cat <<DONEINSTRUCT - -sdparted interactive mode - -rules: -1. no answer means you accept default value -2. enter '0' for no partition - -DONEINSTRUCT - - UserAbort && ShowError "script canceled by user" - - CalculatePartitions - - GetSwapSize - - FATSIZE= - - CalculatePartitions - - GetExtSize - - GetExtType - - FATSIZE= - - CalculatePartitions - - GetFatSize - -} - -GetSwapSize() { - - SWAPTEST= - - while [ -z "$SWAPTEST" ] - do - echo - echo -n "swap partition size [default=$SWAPSIZE]: " - read SWAPRESP - - [ -z "$SWAPRESP" ] && SWAPRESP="$SWAPSIZE" - echo "$SWAPRESP" > /dev/null 2>&1 >>"$LOGFILE" - - ValidateSizeArg "$SWAPRESP" - SWAPTEST="$FUNC_RET" - [ -n "$SWAPTEST" ] && [ $SWAPTEST -gt $SDSIZE ] && ShowMessage "$SWAPRESP > available space($(($SDSIZE))M)." && SWAPTEST= - done - - SWAPSIZE=$SWAPTEST - -} - -GetExtSize() { - - EXTTEST= - - while [ -z "$EXTTEST" ] - do - echo - echo -n "ext partition size [default=$EXTSIZE]: " - read EXTRESP - - [ -z "$EXTRESP" ] && EXTRESP="$EXTSIZE" - echo "$EXTRESP" > /dev/null 2>&1 >>"$LOGFILE" - - ValidateSizeArg "$EXTRESP" - EXTTEST="$FUNC_RET" - - [ -n "$EXTTEST" ] && [ $EXTTEST -gt $(($SDSIZE - $SWAPSIZE)) ] && ShowMessage "$EXTRESP > available space($(($SDSIZE - $SWAPSIZE))M)." && EXTTEST= - done - - EXTSIZE=$EXTTEST - -} - -GetExtType() { - - FSTEST= - - while [ -z "$FSTEST" ] - do - echo - echo -n "ext partition type [default=$EXTFS]: " - read FSRESP - - [ -z "$FSRESP" ] && FSRESP="$EXTFS" - echo "$FSRESP" > /dev/null 2>&1 >>"$LOGFILE" - - ValidateExtArg "$FSRESP" - FSTEST="$FUNC_RET" - done - - EXTFS="$FSTEST" - -} - -GetFatSize() { - - FATTEST= - - while [ -z "$FATTEST" ] - do - echo - echo -n "fat partition size [default=$FATSIZE]: " - read FATRESP - - [ -z "$FATRESP" ] && FATRESP="$FATSIZE" - echo "$FATRESP" > /dev/null 2>&1 >>"$LOGFILE" - - ValidateSizeArg "$FATRESP" - FATTEST="$FUNC_RET" - - [ -n "$FATTEST" ] && [ $FATTEST -gt $FATSIZE ] && ShowMessage "$FATRESP > available space($(($SDSIZE - $SWAPSIZE - $EXTSIZE))M)." && FATTEST= - [ -n "$FATTEST" ] && [ $FATTEST -le 0 ] && ShowMessage "must have a fat32 partition greater than 0MB" && FATTEST= - done - - FATSIZE=$FATTEST - -} - - -SCRIPTNAME="sdparted" -SCRIPTREV="0.6" -MYNAME="51dusty" - -IMODE= -SILENTRUN= -CREATEPART= -FUNC_RET= - -UEXTFSONLY= -DEXTFSONLY= - -TTISOK= -TTISLOOP= -TTISMSDOS= - -SDSIZE= -SDSIZEMB= -SDINFO=$(cat /etc/fstab | grep /sdcard | awk '{print $1}') -if [ -L "$SDINFO" ] -then - SDPATH=$(ls -l $SDINFO | awk '{print $11}') -else - SDPATH=$SDINFO -fi -# we may now have an SDPATH, let's make sure its on mmcblkX or mmcblkXp1 -CHECK_SDPATH1=$(echo $SDPATH | grep mmcblk.$) -CHECK_SDPATH2=$(echo $SDPATH | grep mmcblk.p1$) -if [ -z "$CHECK_SDPATH1" ] -then - if [ -z "$CHECK_SDPATH2" ] - then - echo fail1 - unset SDPATH - else - LEN=${#SDPATH} - BLKLEN=$(expr $LEN - 2) - SDPATH=${SDPATH:0:$BLKLEN} - fi -fi - - -FATSIZE= -FATTYPE="fat32" -FATPATH=$SDPATH"p1" - -EXTSIZE=512 -EXTFS="ext2" -EXTPATH=$SDPATH"p2" -EXTEND= - -SWAPSIZE=32 -SWAPTYPE="linux-swap" -SWAPPATH=$SDPATH"p3" -SWAPEND= - -CMPARTED="/sbin/parted" -CMTUNE2FS="/sbin/tune2fs" -CME2FSCK="/sbin/e2fsck" - -# give the output some breathing room -echo "$SCRIPTREV" >> "$LOGFILE" -echo - -# check for arguments -while [ $# -gt 0 ] ; do - case "$1" in - - -h|--help) ShowHelp ; exit 0 ;; - - -fs|--fatsize) shift ; ValidateSizeArg "$1" ; FATSIZE="$FUNC_RET" ; CREATEPART="$1" ;; - -es|--extsize) shift ; ValidateSizeArg "$1" ; EXTSIZE="$FUNC_RET" ; CREATEPART="$1" ;; - -ss|--swapsize) shift ; ValidateSizeArg "$1" ; SWAPSIZE="$FUNC_RET" ; CREATEPART="$1" ;; - -efs|--extfs) shift ; ValidateExtArg "$1" ; EXTFS="$FUNC_RET" ; CREATEPART="$1" ;; - - -ufs|--upgradefs) shift ; ValidateExtArg "$1" ; UEXTFSONLY="$FUNC_RET" ;; - -dfs|--downgradefs) shift ; ValidateExtArg "$1" ; DEXTFSONLY="$FUNC_RET" ;; - - -i|--interactive) IMODE="$1" ;; - - -s|--silent) SILENTRUN="$1" ;; - - -po|--printonly) ShowCardInfo ;; - - *) ShowHelp ; ShowError "unknown argument '$1'" ;; - - esac - shift -done - -# can't do silent when in interactive mode -[ -n "$IMODE" ] && SILENTRUN= - -# make sure sdcard exists and all needed files are here -CheckReqs - -# unmount all -UnmountAll - -# upgrade only? downgrade only? -UpgradeDowngradeOnly - -# check table -CheckTableType - -# prep card -PrepareSdCard - -# check for interactive mode -[ -n "$IMODE" ] && Interactive - -# do some math -CalculatePartitions - -# last chance to cancel -ShowActions - -# partition card -PartitionSdCard - -# upgrade fs if necessary -UpgradeExt "$EXTFS" - -# say goodbye and show print output -ShowCardInfo diff --git a/recovery.cpp b/recovery.cpp index 35e61162e..1e1d9a952 100644 --- a/recovery.cpp +++ b/recovery.cpp @@ -50,7 +50,6 @@ extern "C" { } extern "C" { -#include "extra-functions.h" #include "data.h" #include "gui/gui.h" } diff --git a/twinstall.cpp b/twinstall.cpp index 4bc69424e..86a0979a3 100644 --- a/twinstall.cpp +++ b/twinstall.cpp @@ -41,11 +41,6 @@ #include "partitions.hpp" #include "twrp-functions.hpp" -extern "C" { -#include "extra-functions.h" -int __system(const char *command); -}; - extern RecoveryUI* ui; #define ASSUMED_UPDATE_BINARY_NAME "META-INF/com/google/android/update-binary" |