1 files changed, 406 insertions, 0 deletions

diff --git a/minelf/Retouch.c b/minelf/Retouch.c
new file mode 100644
index 000000000..33809cd6d
--- /dev/null
+++ b/minelf/Retouch.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <errno.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <string.h>
+#include <strings.h>
+#include "Retouch.h"
+#include "applypatch/applypatch.h"
+
+typedef struct {
+    int32_t mmap_addr;
+    char tag[4]; /* 'P', 'R', 'E', ' ' */
+} prelink_info_t __attribute__((packed));
+
+#define false 0
+#define true 1
+
+static int32_t offs_prev;
+static uint32_t cont_prev;
+
+static void init_compression_state(void) {
+    offs_prev = 0;
+    cont_prev = 0;
+}
+
+// For details on the encoding used for relocation lists, please
+// refer to build/tools/retouch/retouch-prepare.c. The intent is to
+// save space by removing most of the inherent redundancy.
+
+static void decode_bytes(uint8_t *encoded_bytes, int encoded_size,
+                         int32_t *dst_offset, uint32_t *dst_contents) {
+    if (encoded_size == 2) {
+        *dst_offset = offs_prev + (((encoded_bytes[0]&0x60)>>5)+1)*4;
+
+        // if the original was negative, we need to 1-pad before applying delta
+        int32_t tmp = (((encoded_bytes[0] & 0x0000001f) << 8) |
+                       encoded_bytes[1]);
+        if (tmp & 0x1000) tmp = 0xffffe000 | tmp;
+        *dst_contents = cont_prev + tmp;
+    } else if (encoded_size == 3) {
+        *dst_offset = offs_prev + (((encoded_bytes[0]&0x30)>>4)+1)*4;
+
+        // if the original was negative, we need to 1-pad before applying delta
+        int32_t tmp = (((encoded_bytes[0] & 0x0000000f) << 16) |
+                       (encoded_bytes[1] << 8) |
+                       encoded_bytes[2]);
+        if (tmp & 0x80000) tmp = 0xfff00000 | tmp;
+        *dst_contents = cont_prev + tmp;
+    } else {
+        *dst_offset =
+          (encoded_bytes[0]<<24) |
+          (encoded_bytes[1]<<16) |
+          (encoded_bytes[2]<<8) |
+          encoded_bytes[3];
+        if (*dst_offset == 0x3fffffff) *dst_offset = -1;
+        *dst_contents =
+          (encoded_bytes[4]<<24) |
+          (encoded_bytes[5]<<16) |
+          (encoded_bytes[6]<<8) |
+          encoded_bytes[7];
+    }
+}
+
+static uint8_t *decode_in_memory(uint8_t *encoded_bytes,
+                                 int32_t *offset, uint32_t *contents) {
+    int input_size, charIx;
+    uint8_t input[8];
+
+    input[0] = *(encoded_bytes++);
+    if (input[0] & 0x80)
+        input_size = 2;
+    else if (input[0] & 0x40)
+        input_size = 3;
+    else
+        input_size = 8;
+
+    // we already read one byte..
+    charIx = 1;
+    while (charIx < input_size) {
+        input[charIx++] = *(encoded_bytes++);
+    }
+
+    // depends on the decoder state!
+    decode_bytes(input, input_size, offset, contents);
+
+    offs_prev = *offset;
+    cont_prev = *contents;
+
+    return encoded_bytes;
+}
+
+int retouch_mask_data(uint8_t *binary_object,
+                      int32_t binary_size,
+                      int32_t *desired_offset,
+                      int32_t *retouch_offset) {
+    retouch_info_t *r_info;
+    prelink_info_t *p_info;
+
+    int32_t target_offset = 0;
+    if (desired_offset) target_offset = *desired_offset;
+
+    int32_t p_offs = binary_size-sizeof(prelink_info_t); // prelink_info_t
+    int32_t r_offs = p_offs-sizeof(retouch_info_t); // retouch_info_t
+    int32_t b_offs; // retouch data blob
+
+    // If not retouched, we say it was a match. This might get invoked on
+    // non-retouched binaries, so that's why we need to do this.
+    if (retouch_offset != NULL) *retouch_offset = target_offset;
+    if (r_offs < 0) return (desired_offset == NULL) ?
+                      RETOUCH_DATA_NOTAPPLICABLE : RETOUCH_DATA_MATCHED;
+    p_info = (prelink_info_t *)(binary_object+p_offs);
+    r_info = (retouch_info_t *)(binary_object+r_offs);
+    if (strncmp(p_info->tag, "PRE ", 4) ||
+        strncmp(r_info->tag, "RETOUCH ", 8))
+        return (desired_offset == NULL) ?
+          RETOUCH_DATA_NOTAPPLICABLE : RETOUCH_DATA_MATCHED;
+
+    b_offs = r_offs-r_info->blob_size;
+    if (b_offs < 0) {
+        printf("negative binary offset: %d = %d - %d\n",
+               b_offs, r_offs, r_info->blob_size);
+        return RETOUCH_DATA_ERROR;
+    }
+    uint8_t *b_ptr = binary_object+b_offs;
+
+    // Retouched: let's go through the work then.
+    int32_t offset_candidate = target_offset;
+    bool offset_set = false, offset_mismatch = false;
+    init_compression_state();
+    while (b_ptr < (uint8_t *)r_info) {
+        int32_t retouch_entry_offset;
+        uint32_t *retouch_entry;
+        uint32_t retouch_original_value;
+
+        b_ptr = decode_in_memory(b_ptr,
+                                 &retouch_entry_offset,
+                                 &retouch_original_value);
+        if (retouch_entry_offset < (-1) ||
+            retouch_entry_offset >= b_offs) {
+            printf("bad retouch_entry_offset: %d", retouch_entry_offset);
+            return RETOUCH_DATA_ERROR;
+        }
+
+        // "-1" means this is the value in prelink_info_t, which also gets
+        // randomized.
+        if (retouch_entry_offset == -1)
+            retouch_entry = (uint32_t *)&(p_info->mmap_addr);
+        else
+            retouch_entry = (uint32_t *)(binary_object+retouch_entry_offset);
+
+        if (desired_offset)
+            *retouch_entry = retouch_original_value + target_offset;
+
+        // Infer the randomization shift, compare to previously inferred.
+        int32_t offset_of_this_entry = (int32_t)(*retouch_entry-
+                                                 retouch_original_value);
+        if (!offset_set) {
+            offset_candidate = offset_of_this_entry;
+            offset_set = true;
+        } else {
+            if (offset_candidate != offset_of_this_entry) {
+                offset_mismatch = true;
+                printf("offset is mismatched: %d, this entry is %d,"
+                       " original 0x%x @ 0x%x",
+                       offset_candidate, offset_of_this_entry,
+                       retouch_original_value, retouch_entry_offset);
+            }
+        }
+    }
+    if (b_ptr > (uint8_t *)r_info) {
+        printf("b_ptr went too far: %p, while r_info is %p",
+               b_ptr, r_info);
+        return RETOUCH_DATA_ERROR;
+    }
+
+    if (offset_mismatch) return RETOUCH_DATA_MISMATCHED;
+    if (retouch_offset != NULL) *retouch_offset = offset_candidate;
+    return RETOUCH_DATA_MATCHED;
+}
+
+// On success, _override is set to the offset that was actually applied.
+// This implies that once we randomize to an offset we stick with it.
+// This in turn is necessary in order to guarantee recovery after crash.
+bool retouch_one_library(const char *binary_name,
+                         const char *binary_sha1,
+                         int32_t retouch_offset,
+                         int32_t *retouch_offset_override) {
+    bool success = true;
+    int result;
+
+    FileContents file;
+    file.data = NULL;
+
+    char binary_name_atomic[strlen(binary_name)+10];
+    strcpy(binary_name_atomic, binary_name);
+    strcat(binary_name_atomic, ".atomic");
+
+    // We need a path that exists for calling statfs() later.
+    //
+    // Assume that binary_name (eg "/system/app/Foo.apk") is located
+    // on the same filesystem as its top-level directory ("/system").
+    char target_fs[strlen(binary_name)+1];
+    char* slash = strchr(binary_name+1, '/');
+    if (slash != NULL) {
+        int count = slash - binary_name;
+        strncpy(target_fs, binary_name, count);
+        target_fs[count] = '\0';
+    } else {
+        strcpy(target_fs, binary_name);
+    }
+
+    result = LoadFileContents(binary_name, &file, RETOUCH_DONT_MASK);
+
+    if (result == 0) {
+        // Figure out the *apparent* offset to which this file has been
+        // retouched. If it looks good, we will skip processing (we might
+        // have crashed and during this recovery pass we don't want to
+        // overwrite a valuable saved file in /cache---which would happen
+        // if we blindly retouch everything again). NOTE: This implies
+        // that we might have to override the supplied retouch offset. We
+        // can do the override only once though: everything should match
+        // afterward.
+
+        int32_t inferred_offset;
+        int retouch_probe_result = retouch_mask_data(file.data,
+                                                     file.size,
+                                                     NULL,
+                                                     &inferred_offset);
+
+        if (retouch_probe_result == RETOUCH_DATA_MATCHED) {
+            if ((retouch_offset == inferred_offset) ||
+                ((retouch_offset != 0 && inferred_offset != 0) &&
+                 (retouch_offset_override != NULL))) {
+                // This file is OK already and we are allowed to override.
+                // Let's just return the offset override value. It is critical
+                // to skip regardless of override: a broken file might need
+                // recovery down the list and we should not mess up the saved
+                // copy by doing unnecessary retouching.
+                //
+                // NOTE: If retouching was already started with a different
+                // value, we will not be allowed to override. This happens
+                // if on the retouch list there is a patched binary (which is
+                // masked in apply_patch()) before there is a non-patched
+                // binary.
+                if (retouch_offset_override != NULL)
+                    *retouch_offset_override = inferred_offset;
+                success = true;
+                goto out;
+            } else {
+                // Retouch to zero (mask the retouching), to make sure that
+                // the SHA-1 check will pass below.
+                int32_t zero = 0;
+                retouch_mask_data(file.data, file.size, &zero, NULL);
+                SHA(file.data, file.size, file.sha1);
+            }
+        }
+
+        if (retouch_probe_result == RETOUCH_DATA_NOTAPPLICABLE) {
+            // In the case of not retouchable, fake it. We do not want
+            // to do the normal processing and overwrite the backup file:
+            // we might be recovering!
+            //
+            // We return a zero override, which tells the caller that we
+            // simply skipped the file.
+            if (retouch_offset_override != NULL)
+                *retouch_offset_override = 0;
+            success = true;
+            goto out;
+        }
+
+        // If we get here, either there was a mismatch in the offset, or
+        // the file has not been processed yet. Continue with normal
+        // processing.
+    }
+
+    if (result != 0 || FindMatchingPatch(file.sha1, &binary_sha1, 1) < 0) {
+        free(file.data);
+        printf("Attempting to recover source from '%s' ...\n",
+               CACHE_TEMP_SOURCE);
+        result = LoadFileContents(CACHE_TEMP_SOURCE, &file, RETOUCH_DO_MASK);
+        if (result != 0 || FindMatchingPatch(file.sha1, &binary_sha1, 1) < 0) {
+            printf(" failed.\n");
+            success = false;
+            goto out;
+        }
+        printf(" succeeded.\n");
+    }
+
+    // Retouch in-memory before worrying about backing up the original.
+    //
+    // Recovery steps will be oblivious to the actual retouch offset used,
+    // so might as well write out the already-retouched copy. Then, in the
+    // usual case, we will just swap the file locally, with no more writes
+    // needed. In the no-free-space case, we will then write the same to the
+    // original location.
+
+    result = retouch_mask_data(file.data, file.size, &retouch_offset, NULL);
+    if (result != RETOUCH_DATA_MATCHED) {
+        success = false;
+        goto out;
+    }
+    if (retouch_offset_override != NULL)
+        *retouch_offset_override = retouch_offset;
+
+    // How much free space do we need?
+    bool enough_space = false;
+    size_t free_space = FreeSpaceForFile(target_fs);
+    // 50% margin when estimating the space needed.
+    enough_space = (free_space > (file.size * 3 / 2));
+
+    // The experts say we have to allow for a retry of the
+    // whole process to avoid filesystem weirdness.
+    int retry = 1;
+    bool made_copy = false;
+    do {
+        // First figure out where to store a copy of the original.
+        // Ideally leave the original itself intact until the
+        // atomic swap. If no room on the same partition, fall back
+        // to the cache partition and remove the original.
+
+        if (!enough_space) {
+            printf("Target is %ldB; free space is %ldB: not enough.\n",
+                   (long)file.size, (long)free_space);
+
+            retry = 0;
+            if (MakeFreeSpaceOnCache(file.size) < 0) {
+                printf("Not enough free space on '/cache'.\n");
+                success = false;
+                goto out;
+            }
+            if (SaveFileContents(CACHE_TEMP_SOURCE, file) < 0) {
+                printf("Failed to back up source file.\n");
+                success = false;
+                goto out;
+            }
+            made_copy = true;
+            unlink(binary_name);
+
+            size_t free_space = FreeSpaceForFile(target_fs);
+            printf("(now %ld bytes free for target)\n", (long)free_space);
+        }
+
+        result = SaveFileContents(binary_name_atomic, file);
+        if (result != 0) {
+            // Maybe the filesystem was optimistic: retry.
+            enough_space = false;
+            unlink(binary_name_atomic);
+            printf("Saving the retouched contents failed; retrying.\n");
+            continue;
+        }
+
+        // Succeeded; no need to retry.
+        break;
+    } while (retry-- > 0);
+
+    // Give the .atomic file the same owner, group, and mode of the
+    // original source file.
+    if (chmod(binary_name_atomic, file.st.st_mode) != 0) {
+        printf("chmod of \"%s\" failed: %s\n",
+               binary_name_atomic, strerror(errno));
+        success = false;
+        goto out;
+    }
+    if (chown(binary_name_atomic, file.st.st_uid, file.st.st_gid) != 0) {
+        printf("chown of \"%s\" failed: %s\n",
+               binary_name_atomic,
+               strerror(errno));
+        success = false;
+        goto out;
+    }
+
+    // Finally, rename the .atomic file to replace the target file.
+    if (rename(binary_name_atomic, binary_name) != 0) {
+        printf("rename of .atomic to \"%s\" failed: %s\n",
+               binary_name, strerror(errno));
+        success = false;
+        goto out;
+    }
+
+    // If this run created a copy, and we're here, we can delete it.
+    if (made_copy) unlink(CACHE_TEMP_SOURCE);
+
+  out:
+    // clean up
+    free(file.data);
+    unlink(binary_name_atomic);
+
+    return success;
+}