/*
* Copyright (C) 2018 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#pragma once
#include <ostream>
#include <string>
#include <vector>
#include <gtest/gtest_prod.h> // FRIEND_TEST
#include "otautil/rangeset.h"
// Represents the target info used in a Command. TargetInfo contains the ranges of the blocks and
// the expected hash.
class TargetInfo {
public:
TargetInfo() = default;
TargetInfo(std::string hash, RangeSet ranges)
: hash_(std::move(hash)), ranges_(std::move(ranges)) {}
const std::string& hash() const {
return hash_;
}
const RangeSet& ranges() const {
return ranges_;
}
size_t blocks() const {
return ranges_.blocks();
}
bool operator==(const TargetInfo& other) const {
return hash_ == other.hash_ && ranges_ == other.ranges_;
}
private:
friend std::ostream& operator<<(std::ostream& os, const TargetInfo& source);
// The hash of the data represented by the object.
std::string hash_;
// The block ranges that the data should be written to.
RangeSet ranges_;
};
std::ostream& operator<<(std::ostream& os, const TargetInfo& source);
// Represents the stash info used in a Command.
class StashInfo {
public:
StashInfo() = default;
StashInfo(std::string id, RangeSet ranges) : id_(std::move(id)), ranges_(std::move(ranges)) {}
size_t blocks() const {
return ranges_.blocks();
}
const std::string& id() const {
return id_;
}
const RangeSet& ranges() const {
return ranges_;
}
bool operator==(const StashInfo& other) const {
return id_ == other.id_ && ranges_ == other.ranges_;
}
private:
friend std::ostream& operator<<(std::ostream& os, const StashInfo& stash);
// The id (i.e. hash) of the stash.
std::string id_;
// The matching location of the stash.
RangeSet ranges_;
};
std::ostream& operator<<(std::ostream& os, const StashInfo& stash);
// Represents the source info in a Command, whose data could come from source image, stashed blocks,
// or both.
class SourceInfo {
public:
SourceInfo() = default;
SourceInfo(std::string hash, RangeSet ranges, RangeSet location, std::vector<StashInfo> stashes)
: hash_(std::move(hash)),
ranges_(std::move(ranges)),
location_(std::move(location)),
stashes_(std::move(stashes)) {
blocks_ = ranges_.blocks();
for (const auto& stash : stashes_) {
blocks_ += stash.ranges().blocks();
}
}
const std::string& hash() const {
return hash_;
}
size_t blocks() const {
return blocks_;
}
bool operator==(const SourceInfo& other) const {
return hash_ == other.hash_ && ranges_ == other.ranges_ && location_ == other.location_ &&
stashes_ == other.stashes_;
}
private:
friend std::ostream& operator<<(std::ostream& os, const SourceInfo& source);
// The hash of the data represented by the object.
std::string hash_;
// The block ranges from the source image to read data from. This could be a subset of all the
// blocks represented by the object, or empty if all the data should be loaded from stash.
RangeSet ranges_;
// The location in the buffer to load ranges_ into. Empty if ranges_ alone covers all the blocks
// (i.e. nothing needs to be loaded from stash).
RangeSet location_;
// The info for the stashed blocks that are part of the source. Empty if there's none.
std::vector<StashInfo> stashes_;
// Total number of blocks represented by the object.
size_t blocks_{ 0 };
};
std::ostream& operator<<(std::ostream& os, const SourceInfo& source);
class PatchInfo {
public:
PatchInfo() = default;
PatchInfo(size_t offset, size_t length) : offset_(offset), length_(length) {}
size_t offset() const {
return offset_;
}
size_t length() const {
return length_;
}
bool operator==(const PatchInfo& other) const {
return offset_ == other.offset_ && length_ == other.length_;
}
private:
size_t offset_{ 0 };
size_t length_{ 0 };
};
// Command class holds the info for an update command that performs block-based OTA (BBOTA). Each
// command consists of one or several args, namely TargetInfo, SourceInfo, StashInfo and PatchInfo.
// The currently used BBOTA version is v4.
//
// zero <tgt_ranges>
// - Fill the indicated blocks with zeros.
// - Meaningful args: TargetInfo
//
// new <tgt_ranges>
// - Fill the blocks with data read from the new_data file.
// - Meaningful args: TargetInfo
//
// erase <tgt_ranges>
// - Mark the given blocks as empty.
// - Meaningful args: TargetInfo
//
// move <hash> <...>
// - Read the source blocks, write result to target blocks.
// - Meaningful args: TargetInfo, SourceInfo
//
// See the note below for <...>.
//
// bsdiff <patchstart> <patchlen> <srchash> <dsthash> <...>
// imgdiff <patchstart> <patchlen> <srchash> <dsthash> <...>
// - Read the source blocks, apply a patch, and write result to target blocks.
// - Meaningful args: PatchInfo, TargetInfo, SourceInfo
//
// It expects <...> in one of the following formats:
//
// <tgt_ranges> <src_block_count> - <[stash_id:stash_location] ...>
// (loads data from stashes only)
//
// <tgt_ranges> <src_block_count> <src_ranges>
// (loads data from source image only)
//
// <tgt_ranges> <src_block_count> <src_ranges> <src_ranges_location>
// <[stash_id:stash_location] ...>
// (loads data from both of source image and stashes)
//
// stash <stash_id> <src_ranges>
// - Load the given source blocks and stash the data in the given slot of the stash table.
// - Meaningful args: StashInfo
//
// free <stash_id>
// - Free the given stash data.
// - Meaningful args: StashInfo
//
// compute_hash_tree <hash_tree_ranges> <source_ranges> <hash_algorithm> <salt_hex> <root_hash>
// - Computes the hash_tree bytes and writes the result to the specified range on the
// block_device.
//
// abort
// - Abort the current update. Allowed for testing code only.
//
class Command {
public:
enum class Type {
ABORT,
BSDIFF,
COMPUTE_HASH_TREE,
ERASE,
FREE,
IMGDIFF,
MOVE,
NEW,
STASH,
ZERO,
LAST, // Not a valid type.
};
Command() = default;
Command(Type type, size_t index, std::string cmdline, PatchInfo patch, TargetInfo target,
SourceInfo source, StashInfo stash)
: type_(type),
index_(index),
cmdline_(std::move(cmdline)),
patch_(std::move(patch)),
target_(std::move(target)),
source_(std::move(source)),
stash_(std::move(stash)) {}
// Parses the given command 'line' into a Command object and returns it. The 'index' is specified
// by the caller to index the object. On parsing error, it returns an empty Command object that
// evaluates to false, and the specific error message will be set in 'err'.
static Command Parse(const std::string& line, size_t index, std::string* err);
// Parses the command type from the given string.
static Type ParseType(const std::string& type_str);
Type type() const {
return type_;
}
size_t index() const {
return index_;
}
const std::string& cmdline() const {
return cmdline_;
}
const PatchInfo& patch() const {
return patch_;
}
const TargetInfo& target() const {
return target_;
}
const SourceInfo& source() const {
return source_;
}
const StashInfo& stash() const {
return stash_;
}
constexpr explicit operator bool() const {
return type_ != Type::LAST;
}
private:
friend class ResumableUpdaterTest;
friend class UpdaterTest;
FRIEND_TEST(CommandsTest, Parse_ABORT_Allowed);
FRIEND_TEST(CommandsTest, Parse_InvalidNumberOfArgs);
FRIEND_TEST(CommandsTest, ParseTargetInfoAndSourceInfo_InvalidInput);
FRIEND_TEST(CommandsTest, ParseTargetInfoAndSourceInfo_StashesOnly);
FRIEND_TEST(CommandsTest, ParseTargetInfoAndSourceInfo_SourceBlocksAndStashes);
FRIEND_TEST(CommandsTest, ParseTargetInfoAndSourceInfo_SourceBlocksOnly);
// Parses the target and source info from the given 'tokens' vector. Saves the parsed info into
// 'target' and 'source' objects. Returns the parsing result. Error message will be set in 'err'
// on parsing error, and the contents in 'target' and 'source' will be undefined.
static bool ParseTargetInfoAndSourceInfo(const std::vector<std::string>& tokens,
const std::string& tgt_hash, TargetInfo* target,
const std::string& src_hash, SourceInfo* source,
std::string* err);
// Allows parsing ABORT command, which should be used for testing purpose only.
static bool abort_allowed_;
// The type of the command.
Type type_{ Type::LAST };
// The index of the Command object, which is specified by the caller.
size_t index_{ 0 };
// The input string that the Command object is parsed from.
std::string cmdline_;
// The patch info. Only meaningful for BSDIFF and IMGDIFF commands.
PatchInfo patch_;
// The target info, where the command should be written to.
TargetInfo target_;
// The source info to load the source blocks for the command.
SourceInfo source_;
// The stash info. Only meaningful for STASH and FREE commands. Note that although SourceInfo may
// also load data from stash, such info will be owned and managed by SourceInfo (i.e. in source_).
StashInfo stash_;
};
std::ostream& operator<<(std::ostream& os, const Command& command);
