1 files changed, 130 insertions, 0 deletions
diff --git a/src/python/pulsegen.py b/src/python/pulsegen.py
new file mode 100644
index 0000000..161625a
--- /dev/null
+++ b/src/python/pulsegen.py
@@ -0,0 +1,130 @@
+import serial
+import time
+import signal
+
+class PicoPulseGen:
+    def __init__(self, port='/dev/ttyACM0'):
+        self._pulse_offset = 0
+        self._pulse_width = 0
+        self._trig_edges = 0
+        
+        self.pico = serial.Serial(port, 115200)
+        time.sleep(0.1)
+        self.pico.write(b'S')
+
+        test = self.pico.readline()
+        if b'PulseGenerator' not in test:
+            raise ConnectionError('Could not connect to the PulseGenerator :(')
+
+        signal.signal(signal.SIGALRM, self.arm_abort)
+        
+
+    @property
+    def pulse_offset(self):
+        return self._pulse_offset
+
+    
+    @pulse_offset.setter
+    def pulse_offset(self, offset):
+        if type(offset) != int or offset < 0 or offset > 0xFFFFFFFF:
+            raise ValueError('Offset has to be an int between 0 and 0xFFFFFFFF')
+        
+        self._pulse_offset = offset
+        
+        self.pico.flushInput()
+        self.pico.write(b'O')
+        self.pico.write((self._pulse_offset).to_bytes(4, 'little'))
+        ret = self.pico.readline()
+        assert int(ret.strip()) == self._pulse_offset, ret
+
+        
+    @property
+    def pulse_width(self):
+        return self._pulse_offset
+
+    
+    @pulse_width.setter
+    def pulse_width(self, width):
+        if type(width) != int or width < 0 or width > 0xFFFFFFFF:
+            raise ValueError('Width has to be an int between 0 and 0xFFFFFFFF')
+        
+        self._pulse_width = width
+
+        self.pico.flushInput()
+        self.pico.write(b'W')
+        self.pico.write((self._pulse_width).to_bytes(4, 'little'))
+        ret = self.pico.readline()
+        assert int(ret.strip()) == self._pulse_width, ret
+
+
+    @property
+    def trig_edges(self):
+        return self._trig_edges
+
+    
+    @trig_edges.setter
+    def trig_edges(self, edges):
+        if type(edges) != int or edges < 0 or edges > 0xFFFFFFFF:
+            raise ValueError('Width has to be an int between 0 and 0xFFFFFFFF')
+        
+        self._trig_edges = edges
+        
+        self.pico.write(b'E')
+        self.pico.write((self._trig_edges).to_bytes(4, 'little'))
+        ret = self.pico.readline()
+        assert int(ret.strip()) == self._trig_edges, ret
+            
+        
+    def arm(self):
+        self.pico.write(b'A')
+        ret = self.pico.readline()
+        assert b'A' in ret
+
+
+    def wait_trig(self, timeout=5):
+        self.pico.write(b'B')
+        signal.alarm(timeout)
+        ret = self.pico.readline()
+        signal.alarm(0)
+        assert b'T' in ret
+
+
+    def arm_abort(self, signum, frame):
+        print('No trigger observed, disarming!')
+        self.pico.write(b'D')
+
+
+    def status(self):
+        self.pico.write(b'S')
+        ret = self.pico.readline()
+        print(ret.decode('utf-8'))
+        
+
+    def set_gpio(self, state):
+        if type(state) != int or state < 0:
+            raise ValueError('State has to be zero (GPIO 0) or a positive value larger than zero (GPIO 1)')
+
+        self.pico.write(b'G')
+        self.pico.write(bytes([7])) # For now there is only one GPIO pin used for this functionality
+        if state:
+            self.pico.write(bytes([1]))
+        else:
+            self.pico.write(bytes([0]))
+
+        ret = self.pico.readline()
+        assert b'G' in ret
+
+
+    def read_gpios(self):
+        self.pico.write(b'R')
+        ret = self.pico.readline()
+        ret = int(ret.strip())
+        return ret
+
+    
+    def close(self):
+        self.pico.close()
+
+
+    def __del__(self):
+        self.pico.close()
+\ No newline at end of file