From 56834b63cc7abed564d55b4d4cbb6063f3cc0629 Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Tue, 12 Jul 2011 00:00:36 +1000 Subject: Missed two READMEs, updated now. --- heimdall-frontend/doc-pak/README | 521 ++++++++++++++++++++++++++++++++++----- 1 file changed, 465 insertions(+), 56 deletions(-) (limited to 'heimdall-frontend') diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README index 27fba92..8dd296e 100644 --- a/heimdall-frontend/doc-pak/README +++ b/heimdall-frontend/doc-pak/README @@ -5,115 +5,524 @@ DISCLAIMER: This software attempts to flash your Galaxy S device. The very nature of flashing is dangerous. As with all flashing software, Heimdall has the - potential to damage (brick) your phone if not used carefully. If you're + potential to damage (brick) your device if not used carefully. If you're concerned, don't use this software. Flashing ROMs onto your phone may also - void your warranty. I am not responsible for the result of your actions. - + void your warranty. Benjamin Dobell and Glass Echidna are not responsible + for the result of your actions. These instructions are for Linux operating systems. -Installing Heimdall from Source: - 1. First make sure you have installed build-tools and pkgconfig. +Flashing Heimdall Firmware Package with Heimdall Frontend: - 2. Open a terminal and navigate to the directory you extracted Heimdall to. + As of Heimdall Frontend 1.3 there are now two main ways to flash a ROM from + Heimdall Frontend. The simpler and preferred option is to download a + Heimdall Firmware Package and follow the following steps. - 3. Then enter the following commands to compile and install libusb-1.0: - cd libusb-1.0 - ./configure - make - sudo make install - cd .. + 1. Fully charge your device (use the wall charger as it's faster). - If you have problems please consult http://www.libusb.org/ + 2. Open Heimdall Frontend, which can be done by entering the following + command in a terminal: - 4. Enter the following commands to compile and install Heimdall: + heimdall-frontend - cd heimdall - ./configure - make - sudo make install - cd .. + 3. From the "Load Package" tab, under the "Heimdall Firmware Package" + section click the "Browse" button. - NOTE: You can use "checkinstall" instead of "make install" in order - to generate a redistributable package. + 4. Use the dialogue that appears to navigate to, and select, the Heimdall + firmware package that you wish to flash. - 5. Done + 5. You will see progress bars appear as the package is decompressed and + extracted. + When the package has finished being decompressed you should see + information about the particular firmware package that has been + selected. + 6. Verify that your device is listed under "Supported Devices". If it's not + then STOP immediately! DO NOT flash this firmware to your device! + Instead search for an appropriate firmware package for your device. -Installing Heimdall Frontend from Source (Optional): + If you believe there is a mistake and your device is actually + supported please get in contact with the firmware developer (not Glass + Echidna!) and ask them to rectify the issue. If the developer provided + a URL you may be able to contact them by pressing the "Homepage" button. - 1. First make sure you have installed Qt 4.6 or above, - available from http://qt.nokia.com/. + 7. If you've verified your device is supported you may continue to press + the "Load / Customise" button. - 2. Open a terminal and navigate to the directory you extracted Heimdall to. + 8. You should now be looking at the "Flash" tab. If not verify that you did + in fact push the "Load / Customise" button. - 3. Enter the following commands to compile and install Heimdall Frontend: + Generally, you won't NEED or WANT to customise a firmware package! In + which case you can safely move on to step 9. - cd heimdall-frontend - qmake heimdall-frontend.pro - make + Nonetheless, the "Flash" tab provides you with a means to customise the + firmware package before flashing it to your device. See "Performing a + Custom Flash with Heimdall Frontend" for more details. - NOTE: You can use "checkinstall" instead of "make" in order to generate - a redistributable package. + 9. Put your Galaxy S device into download mode and plug it in to your PC. - 4. The file output will be placed in the UNIX sub-directory. Move this file - to your preferred location. + Download mode can be accessed several different ways depending on your + particular device model. If you're unsure how to do this please search + online for the appropriate method. - 5. Done + 10. Press the "Start" button. + + 11. Heimdall Frontend will display the progress and inform you when the + flash is complete. + + If something went wrong i.e. your device wasn't detected because it + wasn't in download mode, then the status section will let you know the + cause of the problem. + + + +Performing a Custom Flash with Heimdall Frontend: + This is the advanced means of flashing firmware to your device. You should + only flash firmware to your device this way if you know what you're doing. + If you're not an advanced user or a developer, in the event that a Heimdall + Firmware Package doesn't exist for the particular firmware you wish to + flash. I strongly recommend you get in touch with developer of the + firmware, or an advanced user, and politely ask them to create a Heimdall + Firmware Package for you. + + If you're looking to customise an existing Heimdall Firmware Package then + follow steps 1-8 of "Flashing Heimdall Firmware Package with Heimdall + Frontend" then start from below with step 5. -Flashing Firmware with Heimdall Frontend: 1. Fully charge your device (use the wall charger as it's faster). - 2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory. + 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package + and extract everything to the one directory. - 3. If the ROM is provided as one of more archives (nested or otherwise), - extract them all to the same location. + 3. If the ROM is not a Heimdall Firmware Package it may instead be provided + as multiple archives (nested or otherwise), extract them all to the same + location. - NOTE: If you want to use the CSC then extract it last. + NOTE: If you want to use the CSC then extract it last. If you're asked + to overwrite files then do so. + + 3. Open Heimdall Frontend, which can be done by entering the following + command in a terminal: + + heimdall-frontend + + 4. Select the "Flash" tab. From the "Flash" tab you're able to completely + customise a flash. + + 5. Before you can chose which partitions you want to flash with particular + files you MUST first select a PIT file. To do this click the "Browse" + button in the "PIT" section. This will open a dialogue allowing you to + navigate to and select a valid PIT (.pit) file. + + 6. If a valid PIT file has been selected then "Add" button below the list + box will become enabled. Press this button to add a partition to your + flash. + + 7. When you first add a partition you will see the "Partition Name" and + "Partition ID" be populated with information. Use the "Partition Name" + drop down to select which partition you wish to flash. "Partition ID" + will automatically update and is never directly editable. + + 8. You must then select a file to flash to the partition that you just + specified using the "Browse" button under the "File / Partition". You + will not be able to flash, create a firmware package or add another + partition until you have selected a file. However, you're still able to + press the "Remove" button if you've decided not to flash the partition + you've just specified. + + 9. When you've specified a file name then you'll be able to see the updated + information in the partition list to the right. You can select any + partition from this list and customise it as you see fit. + + You can also remove a partition from the list by selecting it and + clicking the "Remove" button. Removing a partition from the list doesn't + remove it from your device, it simply means it will not be flashed. + + 10. Repeat steps 7-9 as often as needed to specify all the partions/files + that you wish to flash. + + 11. Now you can chose whether you would like to repartition your device as + well as whether you would like to prevent the device rebooting once a + flash has been completed. These options can be enabled or disabled by + toggling the "Repartition" and "No Reboot" check-boxes. - 3. Open Heimdall Frontend. + In the general case you will only need to enable repartition if you wish + to change the PIT file on your device. Keep in mind that repartitioning + will wipe your device! - 4. Put your Galaxy S device into download mode. + The "No Reboot" option is rarely required. It's mostly in place so you + can manually boot straight into recovery mode after a flash (rather than + booting up normally). - 5. For each file you wish to flash use "Browse" to select the file. + 12. If you've added at least one partition to your flash (and selected a + file for that partition) then the "Start" button will be enabled. Press + the "Start" button to begin the flashing process. - 6. Press "Start". + You may notice that the "Create Package" tab becomes available at the + whenever the "Start" button becomes available. From this tab you're able + to create a reusable, redistributable Heimdall Firmware Package with the + files and partitions you just selected. See "How to Create a Heimdall + Firmware Package" for details. - 7. Heimdall Frontend will display the progress and inform you when the + 13. Heimdall Frontend will display the progress and inform you when the flash is complete. + If something went wrong i.e. your device wasn't detected because it + wasn't in download mode, then the status section will let you know the + cause of the problem. -Flashing Firmware from Command Line / Terminal: + +Flashing Firmware from Command Line: - 1. Fully charge your device (use the wall charger as it's faster). + 1. Fully charge your phone (use the wall charger as it's faster). - 2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory. + 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package + and extract everything to the one directory. - 3. If the ROM is provided as one of more archives (nested or otherwise), - extract them all to the same location. + 3. If the ROM is not a Heimdall Firmware Package it may instead be provided + as multiple archives (nested or otherwise), extract them all to the same + location. NOTE: If you want to use the CSC then extract it last. - 4. Open a terminal and navigate to the directory where you extracted the - ROM files. + 4. Put your Galaxy S device into download mode and plug it in.. - 5. Type the following to list all the functionality Heimdall supports: + 5. Open a terminal and navigate to the directory where you extracted + the ROM/firmware files. + + 6. Type the following to list all the functionality Heimdall supports: heimdall help - 8. Use the instructions to manually enter a command with all the files you + 7. Use the instructions to manually enter a command with all the files you want to flash. - Here is an example that does a full flash and repartition: + Here is an example that does a full flash and repartition on a GT-I9000: heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin - 9. Done + + 8. Heimdall will display the progress as it flashes so that you know things + are working as they should. + + + +How to Create a Heimdall Firmware Package: + + Firstly, Heimdall's firmware package format is just a regular TAR archive + compressed with gzip. The only two real requirements are that a valid + firmware.xml must be included (refer to Appendix A) and you can only + include files (no directories, links etc.) As such if you'd like there is + nothing preventing you creating Heimdall packages manually. Of course + Heimdall Frontend provides a simple user interface that takes care of all + the hard work for you. + + There are two ways in which you can create a firmware package. You can + create a package from scratch, or you can load an existing package, apply + modifications and then save the package. Creating a package from scratch + is the preferred approach, by taking this approach you're far less likely + to run into file name length limitations, these are not Heimdall's own + limitation but rather a limitation of the TAR archive format. + + Before you can access Heimdall Frontend's firmware creation functionality + (available from the "Create Package" tab) you must first specify which + files will be included in your package as well as a few flashing options + i.e. Whether or not users should repartition when flashing. This + information must be filled out from the "Flash" tab in exactly the same + fashion you would provide information to flash your device (see "Performing + a Custom Flash with Heimdall Frontend"). As mentioned above, it's not the + preferred means, but you're able to load an existing package as a starting + point for this information. + + Once you've specified the files/partitions you wish to include in your + firmware package the "Create Package" tab will become available. Clicking + this tab will display additional information that you can include in your + package. In order to continue you must fill out all sections except for the + URLs section, which is optional. The following is break-down of what all + these options mean. + + - General Firmware Information: - + + Firmware Name - This is the name of your particular firmware. An + example would be "Cyanogenmod". + + Firmware Version - This is the particular version identifier for your + package. Any valid string will be accepted although a the inclusion + of decimal point version number is preferred releases i.e. "7.1". + If it makes sense then feel free to append a text string like "RC1" + or "Beta 1" to the decimal point version. + + Platform Name - This is the name of platform (or operating system) that + your firmware is based on. In most cases this will simply be + "Android". + + Platform Version - This is the operating system version that your + firmware is based on. Again decimal point version numbers are + preferred over text, i.e. "2.3.4" is preferred over "Gingerbread". + + + - Developers - + + URLs (Optional): + + Homepage - Here you can enter your personal URL or a URL particularly + pertaining to the firmware being packaged. The URL must be well + formed for it to work. An example of a well formed URL is + "http://www.glassechidna.com.au/products/heimdall/". It is + important to include "http://" in order to specify the protocol as + other protocols such as "ftp://" are equally valid although + unlikely to be used. + + Donate - Here you can enter a URL that will link users to a page to + make donations for the effort you've put into developing your + firmware. Once again the URL must be well formed but there is no + requirement on how your donation page should work. For instance + both "http://www.glassechidna.com.au/donate/" and + "http://forum.xda-developers.com/donatetome.php?u=2710388" are + equally valid. + + Developer Info: + + Name - Here you can enter in the name of individual team members or a + team name. Click "Add" and the developer will be added to the list + on the right. If you make a mistake you can select a developer from + the list and click "Remove". You can list as many developers as you + like however size constraints of the "Load Package" means only a + few will be visible. Where possible you may want to opt for team + names over listing individual team members. + + + - Supported Devices - + + This section allows you to create a list of devices that are supported by + your particular firmware. Although Heimdall isn't capable of enforcing this + we strongly recommend you take this section seriously. If filled out + correctly you could help save a number of accidental bricks! + + Device Info: + + Manufacturer - This is where you can enter the name of the manufacturer + for a particular device. For now this will most likely be + "Samsung". + + Name - This is the human readable name for a particular device. + "Galaxy S", "Galaxy S II", "Droid Charge", "Vibrant" and + "Galaxy S (Telstra)" are all valid names. There are a lot of + possible variations here so be as specific as you think is + necessary. + + Product Code - This is by far the most important bit of device + information. Device names tend to be region specific and further + subject to the whims of telecommunication companies and resellers. + Product Codes (or product IDs) are designated by manufacturers and + are generally the definitive means of referring to a particular + device. Examples are "GT-I9000", "GT-I9100" and "SCH-I897". If + you're unsure of a particular product code then Google and + GSMArena are your friends! + + + After filling out all the necessary information the "Build" button will be + enabled. If it's still disabled then you know you're missing some required + information. In particular you must specify at least one developer and at + least one supported device. Pressing the "Build" button will bring up a + save dialogue where you must chose a file name for your particular package. + Don't worry about specifying the ".tar.gz" extension Heimdall Frontend will + take care of this automatically. + + Once you've chosen a file name Heimdall Frontend will begin the process of + building the firmware package. In doing so a valid firmware.xml file will + be generated from the information entered, all files will be archived in a + single TAR file then the TAR archive will be compressed via gzip + compression. Compression will take a little while but you will see progress + bars so you know the application hasn't hung. When the progress bars + disappear you're finished making your package. + + Congratulations! You're now ready to redistribute your firmware package + online or by any means you see fit. + + + +Appendix A - firmware.xml + +The following details a part of the Heimdall Firmware Package format. This +is only relevant to developers or advanced users who wish to create Heimdall +Firmware Packages outside of Heimdall Frontend or in some way integrate support +for the format in their own software. + + +All Heimdall Firmware Packages must contain a file called firmware.xml. This +file stores information stores meta-data for the package as well as information +about other files contained in the package that indicates how they should be +flashed. + +The format is fairly straight-forward so it won't be explained in great detail, +nonetheless the following is an example of a valid firmware.xml file. + + + + Test Firmware + 1.1 + + Android + 2.3.4 + + + Benjamin Dobell + Hedonism Bot + + http://www.glassechidna.com.au/ + http://www.glassechidna.com.au/donate/ + + + Samsung + GT-I9000 + Galaxy S + + + Samsung + GT-I9000T + Galaxy S (Telstra) + + + Samsung + GT-I9000M + Vibrant + + + Nl3276-I9000 s1_odin_20100512.pit + 0 + 0 + + + 0 + gq3276-boot.bin + + + 24 + Uh3276-cache.rfs + + + 22 + em3276-factoryfs.rfs + + + 11 + fl3276-modem.bin + + + 21 + Xd3276-param.lfs + + + 3 + if3276-Sbl.bin + + + 6 + cr3276-zImage + + + + + +New lines need not be included and the order in which elements are specified +does not need to match that of the above example. + +One and only one element must be included. The element +must also have a version attribute specified. The version must be parsable as +an integer and indicates what version of the Heimdall Firmware Package +specification the package adheres to. + +All data is stored as strings, however a 's element must be parsable +as an integer. The value represents the partition ID (according to the +specified PIT file) that the file should be flashed to. + +A 's and elements must also be parsable as +an integer. However, as they represent boolean values, a value of zero ("0") +means false (or disabled) where as a non-zero value (typically "1") means true +(or enabled). + +File names are specified relative to the TAR archive in which firmware.xml and +all other files are to be stored. Heimdall Firmware Packages do not support +directories or links, as such file names should only be a name and not a path. + + and are the only optional elements, all other elements must +be included. + + + +Appendix B - Installing Heimdall from Source: + + 1. First make sure you have installed build-tools and pkgconfig. + + 2. Open a terminal and navigate to the directory you downloaded, + or extracted, Heimdall to. + + 3. Enter the following commands to compile and install libusb-1.0: + + cd libusb-1.0 + ./configure + make + sudo make install + cd .. + + If you have problems please consult http://www.libusb.org/ + + 4. Enter the following commands to compile libpit. + + cd libusb-1.0 + ./configure + make + cd .. + + NOTE: There is no need to run "sudo make install". + + 4. Enter the following commands to compile and install Heimdall: + + cd heimdall + ./configure + make + sudo make install + cd .. + + NOTE: You can use "checkinstall" instead of "make install" in order + to generate a redistributable package. + + 5. Done + + + +Appendix C - Installing Heimdall Frontend from Source: + + 1. Compile and install Heimdall, see Appendix B. + + 2. First make sure you have installed Qt 4.7 or later, available from: + + http://qt.nokia.com/downloads/ + + 3. Open a terminal and navigate to the directory you extracted Heimdall to. + + 4. Enter the following commands to compile and install Heimdall Frontend: + + cd heimdall-frontend + qmake heimdall-frontend.pro + make + sudo make install + + NOTE: As an alternative to "sudo make install" you may chose to generate + a package by typing the following: + + sudo checkinstall --pkgversion + + Where is the current Heimdall release e.g. 1.3.0 + + 5. Done + -- cgit v1.2.3