diff options
Diffstat (limited to '')
| -rw-r--r-- | heimdall-frontend/doc-pak/README | 97 |
1 files changed, 52 insertions, 45 deletions
diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README index 8dd296e..a181796 100644 --- a/heimdall-frontend/doc-pak/README +++ b/heimdall-frontend/doc-pak/README @@ -1,4 +1,4 @@ -Heimdall (c) 2010-2011 Benjamin Dobell, Glass Echidna
+Heimdall (c) 2010-2012 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/products/heimdall/
DISCLAIMER:
@@ -23,8 +23,7 @@ Flashing Heimdall Firmware Package with Heimdall Frontend: 1. Fully charge your device (use the wall charger as it's faster).
- 2. Open Heimdall Frontend, which can be done by entering the following
- command in a terminal:
+ 2. Open the a terminal and run Heimdall Frontend by typing:
heimdall-frontend
@@ -82,14 +81,15 @@ Flashing Heimdall Firmware Package with Heimdall Frontend: Performing a Custom Flash with Heimdall Frontend:
- This is the advanced means of flashing firmware to your device. You should
- only flash firmware to your device this way if you know what you're doing.
+ This is the advanced means of flashing firmware to your device.
If you're not an advanced user or a developer, in the event that a Heimdall
- Firmware Package doesn't exist for the particular firmware you wish to
- flash. I strongly recommend you get in touch with developer of the
- firmware, or an advanced user, and politely ask them to create a Heimdall
- Firmware Package for you.
+ Firmware Package doesn't exist for the particular firmware (or files) that + you wish to flash, then I strongly recommend you get in touch with the + developer of the firmware (or files) and politely ask them to create a + Heimdall Firmware Package for you. In doing so, you avoid the risk of + making mistakes due to inexperience. +
If you're looking to customise an existing Heimdall Firmware Package then
follow steps 1-8 of "Flashing Heimdall Firmware Package with Heimdall
@@ -108,8 +108,7 @@ Performing a Custom Flash with Heimdall Frontend: NOTE: If you want to use the CSC then extract it last. If you're asked
to overwrite files then do so.
- 3. Open Heimdall Frontend, which can be done by entering the following
- command in a terminal:
+ 3. Open the a terminal and run Heimdall Frontend by typing:
heimdall-frontend
@@ -119,11 +118,14 @@ Performing a Custom Flash with Heimdall Frontend: 5. Before you can chose which partitions you want to flash with particular
files you MUST first select a PIT file. To do this click the "Browse"
button in the "PIT" section. This will open a dialogue allowing you to
- navigate to and select a valid PIT (.pit) file.
+ navigate to and select a valid PIT (.pit) file. - 6. If a valid PIT file has been selected then "Add" button below the list
- box will become enabled. Press this button to add a partition to your
- flash.
+ If you do not already have a valid PIT file stored on your computer you + can download your device's PIT file from the "Utilities" tab. + + 6. If a valid PIT file has been selected then the "Add" button below the + "Partitions (Files)" list-box will be enabled. Press this button to add + a partition to your flash. 7. When you first add a partition you will see the "Partition Name" and
"Partition ID" be populated with information. Use the "Partition Name"
@@ -221,7 +223,7 @@ How to Create a Heimdall Firmware Package: compressed with gzip. The only two real requirements are that a valid
firmware.xml must be included (refer to Appendix A) and you can only
include files (no directories, links etc.) As such if you'd like there is
- nothing preventing you creating Heimdall packages manually. Of course
+ nothing preventing you from creating Heimdall packages manually. Of course
Heimdall Frontend provides a simple user interface that takes care of all
the hard work for you.
@@ -229,12 +231,11 @@ How to Create a Heimdall Firmware Package: create a package from scratch, or you can load an existing package, apply
modifications and then save the package. Creating a package from scratch
is the preferred approach, by taking this approach you're far less likely
- to run into file name length limitations, these are not Heimdall's own
- limitation but rather a limitation of the TAR archive format.
+ to run into file name length limitations.
Before you can access Heimdall Frontend's firmware creation functionality
(available from the "Create Package" tab) you must first specify which
- files will be included in your package as well as a few flashing options
+ files will be included in your package, as well as a few flashing options
i.e. Whether or not users should repartition when flashing. This
information must be filled out from the "Flash" tab in exactly the same
fashion you would provide information to flash your device (see "Performing
@@ -246,7 +247,7 @@ How to Create a Heimdall Firmware Package: firmware package the "Create Package" tab will become available. Clicking
this tab will display additional information that you can include in your
package. In order to continue you must fill out all sections except for the
- URLs section, which is optional. The following is break-down of what all
+ URLs section, which is optional. The following is a break-down of what all
these options mean.
- General Firmware Information: -
@@ -254,11 +255,11 @@ How to Create a Heimdall Firmware Package: Firmware Name - This is the name of your particular firmware. An
example would be "Cyanogenmod".
- Firmware Version - This is the particular version identifier for your
- package. Any valid string will be accepted although a the inclusion
- of decimal point version number is preferred releases i.e. "7.1".
- If it makes sense then feel free to append a text string like "RC1"
- or "Beta 1" to the decimal point version.
+ Firmware Version - This is the version identifier for your package. Any + valid string will be accepted, although the inclusion of decimal + point version number is preferred i.e. "7.1". If it makes sense + then feel free to append a text string like "RC1" or "Beta 1" to + the decimal point version. Platform Name - This is the name of platform (or operating system) that
your firmware is based on. In most cases this will simply be
@@ -295,9 +296,9 @@ How to Create a Heimdall Firmware Package: team name. Click "Add" and the developer will be added to the list
on the right. If you make a mistake you can select a developer from
the list and click "Remove". You can list as many developers as you
- like however size constraints of the "Load Package" means only a
- few will be visible. Where possible you may want to opt for team
- names over listing individual team members.
+ like, however visual constraints of the "Load Package" tab means + only a few names will be visible. Where possible you may want to + opt for team names over listing individual team members.
- Supported Devices -
@@ -325,7 +326,7 @@ How to Create a Heimdall Firmware Package: Product Codes (or product IDs) are designated by manufacturers and
are generally the definitive means of referring to a particular
device. Examples are "GT-I9000", "GT-I9100" and "SCH-I897". If
- you're unsure of a particular product code then Google and
+ you're unsure of a particular product code then both Google and
GSMArena are your friends!
@@ -339,7 +340,7 @@ How to Create a Heimdall Firmware Package: Once you've chosen a file name Heimdall Frontend will begin the process of
building the firmware package. In doing so a valid firmware.xml file will
- be generated from the information entered, all files will be archived in a
+ be generated from the information entered. All files will be archived in a
single TAR file then the TAR archive will be compressed via gzip
compression. Compression will take a little while but you will see progress
bars so you know the application hasn't hung. When the progress bars
@@ -359,12 +360,12 @@ for the format in their own software. All Heimdall Firmware Packages must contain a file called firmware.xml. This
-file stores information stores meta-data for the package as well as information
-about other files contained in the package that indicates how they should be
-flashed.
+file stores flash information and meta-data for the package as well as +information about other files contained within the package. +
-The format is fairly straight-forward so it won't be explained in great detail,
-nonetheless the following is an example of a valid firmware.xml file.
+The format is fairly straight-forward so it won't be explained in great detail.
+Nonetheless the following is an example of a valid firmware.xml file.
<?xml version="1.0" encoding="UTF-8"?>
<firmware version="1">
@@ -461,17 +462,19 @@ be included. Appendix B - Installing Heimdall from Source:
- 1. First make sure you have installed build-tools and pkgconfig.
+ 1. First make sure you have installed build-tools, pkgconfig, zlib-dev and + libusb-1.0-dev (v1.0.8 or newer). + + NOTE: Package names may not be absolutely identical to those above.
2. Open a terminal and navigate to the directory you downloaded,
or extracted, Heimdall to.
- 3. Enter the following commands to compile and install libusb-1.0:
+ 3. Enter the following commands to compile libpit:
- cd libusb-1.0
- ./configure
- make
- sudo make install
+ cd libpit
+ ./configure + make cd ..
If you have problems please consult http://www.libusb.org/
@@ -493,8 +496,12 @@ Appendix B - Installing Heimdall from Source: sudo make install
cd ..
- NOTE: You can use "checkinstall" instead of "make install" in order
- to generate a redistributable package.
+ NOTE: As an alternative to "sudo make install" you may chose to generate + a package by typing the following: + + sudo checkinstall --pkgversion <version> + + Where <version> is the current Heimdall release e.g. 1.3.0
5. Done
@@ -513,9 +520,9 @@ Appendix C - Installing Heimdall Frontend from Source: 4. Enter the following commands to compile and install Heimdall Frontend:
cd heimdall-frontend
- qmake heimdall-frontend.pro
+ qmake-qt4 heimdall-frontend.pro
make
- sudo make install
+ sudo make install NOTE: As an alternative to "sudo make install" you may chose to generate
a package by typing the following:
|