2 files changed, 138 insertions, 0 deletions

diff --git a/heimdall-frontend/doc-pak/LICENSE b/heimdall-frontend/doc-pak/LICENSE
new file mode 100644
index 0000000..a18336e
--- /dev/null
+++ b/heimdall-frontend/doc-pak/LICENSE
@@ -0,0 +1,19 @@
+Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
\ No newline at end of file
diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README
new file mode 100644
index 0000000..2c7952f
--- /dev/null
+++ b/heimdall-frontend/doc-pak/README
@@ -0,0 +1,119 @@
+Heimdall (c) 2010 Benjamin Dobell, Glass Echidna

+http://www.glassechidna.com.au/products/heimdall/

+

+DISCLAIMER:

+

+    This software attempts to flash your Galaxy S device. The very nature of

+    flashing is dangerous. As with all flashing software, Heimdall has the

+    potential to damage (brick) your phone if not used carefully. If you're

+    concerned, don't use this software. Flashing ROMs onto your phone may also

+    void your warranty. I am not responsible for the result of your actions.

+

+

+

+These instructions are for Linux operating systems.

+

+Installing Heimdall from Source:

+

+    1. First make sure you have installed build-tools and pkgconfig.

+

+    2. Open a terminal and navigate to the directory you extracted Heimdall to.

+

+    3. Then enter the following commands to compile and install libusb-1.0:

+

+            cd libusb-1.0

+            ./configure

+            make

+            sudo make install

+            cd ..

+

+       If you have problems please consult http://www.libusb.org/        

+

+    4. Enter the following commands to compile and install Heimdall:

+

+            cd heimdall

+            ./configure

+            make

+            sudo make install

+            cd ..

+

+	    NOTE: You can use "checkinstall" instead of "make install" in order

+                  to generate a redistributable package.

+

+    5. Done

+

+

+

+Installing Heimdall Frontend from Source (Optional):

+

+    1. First make sure you have installed Qt 4.6 or above,

+       available from http://qt.nokia.com/.

+

+    2. Open a terminal and navigate to the directory you extracted Heimdall to.

+

+    3. Enter the following commands to compile and install Heimdall Frontend:

+

+            cd heimdall-frontend

+            qmake heimdall-frontend.pro

+            make

+

+       NOTE: You can use "checkinstall" instead of "make" in order to generate

+             a redistributable package.

+

+    4. The file output will be placed in the UNIX sub-directory. Move this file

+       to your preferred location.

+

+    5. Done

+

+

+

+Flashing Firmware with Heimdall Frontend:    

+

+    1. Fully charge your device (use the wall charger as it's faster).

+

+    2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.

+

+    3. If the ROM is provided as one of more archives (nested or otherwise),

+       extract them all to the same location.

+

+       NOTE: If you want to use the CSC then extract it last.

+

+    3. Open Heimdall Frontend.

+

+    4. Put your Galaxy S device into download mode.

+

+    5. For each file you wish to flash use "Browse" to select the file.

+

+    6. Press "Start".

+

+    7. Heimdall Frontend will display the progress and inform you when the

+       flash is complete.

+

+

+

+Flashing Firmware from Command Line / Terminal:

+	

+    1. Fully charge your device (use the wall charger as it's faster).

+

+    2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.

+

+    3. If the ROM is provided as one of more archives (nested or otherwise),

+       extract them all to the same location.

+

+       NOTE: If you want to use the CSC then extract it last.

+

+    4. Open a terminal and navigate to the directory where you extracted the

+       ROM files.

+

+    5. Type the following to list all the functionality Heimdall supports:

+

+            heimdall help

+

+    8. Use the instructions to manually enter a command with all the files you

+       want to flash.

+

+       Here is an example that does a full flash and repartition:

+		

+            heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin

+

+    9. Done