6 files changed, 245 insertions, 0 deletions

diff --git a/Linux/.DS_Store b/Linux/.DS_Store
new file mode 100644
index 0000000..c40b296
--- /dev/null
+++ b/Linux/.DS_Store
diff --git a/Linux/._.DS_Store b/Linux/._.DS_Store
new file mode 100644
index 0000000..338bd7b
--- /dev/null
+++ b/Linux/._.DS_Store
diff --git a/Linux/._README b/Linux/._README
new file mode 100644
index 0000000..5b4b4a0
--- /dev/null
+++ b/Linux/._README
diff --git a/Linux/README b/Linux/README
new file mode 100644
index 0000000..d76bc33
--- /dev/null
+++ b/Linux/README
@@ -0,0 +1,120 @@
+Heimdall (c) 2010 Benjamin Dobell, Glass Echidna

+http://www.glassechidna.com.au/products/heimdall/

+

+DISCLAIMER:

+

+    This software attempts to flash your Galaxy S device. The very nature of

+    flashing is dangerous. As with all flashing software, Heimdall has the

+    potential to damage (brick) your phone if not used carefully. If you're

+    concerned, don't use this software. Flashing ROMs onto your phone may also

+    void your warranty. I am not responsible for the result of your actions.

+

+

+

+These instructions are for Linux operating systems.

+

+Installing Heimdall from Source:

+

+    1. First make sure you have installed build-tools and pkgconfig.

+

+    2. Open a terminal and navigate to the directory you extracted Heimdall to.

+

+    3. Then enter the following commands to compile and install libusb-1.0:

+

+            cd libusb-1.0

+            ./configure

+            make

+            sudo make install

+            cd ..

+

+       If you have problems please consult http://www.libusb.org/        

+

+    4. Enter the following commands to compile and install Heimdall:

+

+            cd heimdall

+            ./configure

+            make

+            sudo make install

+            cd ..

+

+	    NOTE: You can use "checkinstall" instead of "make install" in order

+                  to generate a redistributable package.

+

+    5. If you're not installing from a package then run

+       Linux/install-udev-rules.sh to setup user-level permissions for libusb. 

+

+    6. Done

+

+

+

+Installing Heimdall Frontend from Source (Optional):

+

+    1. First make sure you have installed Qt 4.6 or above,

+       available from http://qt.nokia.com/.

+

+    2. Open a terminal and navigate to the directory you extracted Heimdall to.

+

+    3. Enter the following commands to compile and install Heimdall Frontend:

+

+            cd heimdall-frontend

+            qmake heimdall-frontend.pro

+            make

+            sudo make install

+

+       NOTE: You can use "checkinstall" instead of "make install" in order to

+             generate a redistributable package.

+

+    4. Done

+

+

+

+Flashing Firmware with Heimdall Frontend:    

+

+    1. Fully charge your device (use the wall charger as it's faster).

+

+    2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.

+

+    3. If the ROM is provided as one of more archives (nested or otherwise),

+       extract them all to the same location.

+

+       NOTE: If you want to use the CSC then extract it last.

+

+    3. Open Heimdall Frontend.

+

+    4. Put your Galaxy S device into download mode.

+

+    5. For each file you wish to flash use "Browse" to select the file.

+

+    6. Press "Start".

+

+    7. Heimdall Frontend will display the progress and inform you when the

+       flash is complete.

+

+

+

+Flashing Firmware from Command Line / Terminal:

+	

+    1. Fully charge your device (use the wall charger as it's faster).

+

+    2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.

+

+    3. If the ROM is provided as one of more archives (nested or otherwise),

+       extract them all to the same location.

+

+       NOTE: If you want to use the CSC then extract it last.

+

+    4. Open a terminal and navigate to the directory where you extracted the

+       ROM files.

+

+    5. Type the following to list all the functionality Heimdall supports:

+

+            heimdall help

+

+    8. Use the instructions to manually enter a command with all the files you

+       want to flash.

+

+       Here is an example that does a full flash and repartition:

+		

+            heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin

+

+    9. Done

diff --git a/Linux/README.save b/Linux/README.save
new file mode 100644
index 0000000..b63888f
--- /dev/null
+++ b/Linux/README.save
@@ -0,0 +1,120 @@
+Heimdall (c) 2010 Benjamin Dobell, Glass Echidna

+http://www.glassechidna.com.au/products/heimdall/

+

+DISCLAIMER:

+

+    This software attempts to flash your Galaxy S device. The very nature of

+    flashing is dangerous. As with all flashing software, Heimdall has the

+    potential to damage (brick) your phone if not used carefully. If you're

+    concerned, don't use this software. Flashing ROMs onto your phone may also

+    void your warranty. I am not responsible for the result of your actions.

+

+

+

+These instructions are for Linux operating systems.

+

+Installing Heimdall from Source:

+

+    1. First make sure you have installed build-tools and pkgconfig.

+

+    2. Open a terminal and navigate to the directory you extracted Heimdall to.

+

+    3. Then enter the following commands to compile and install libusb-1.0:

+

+            cd libusb-1.0

+            ./configure

+            make

+            sudo make install

+            cd ..

+

+       If you have problems please consult http://www.libusb.org/        

+

+    4. Enter the following commands to compile and install Heimdall:

+

+            cd heimdall

+            ./configure

+            make

+            sudo make install

+            cd ..

+

+	    NOTE: You can use "checkinstall" instead of "make install" in order

+                  to generate a redistributable package.

+

+    5. If you're not installing from a package then run

+       Linux/install-udev-rules.sh to setup user-level permissions for libusb. 

+

+    6. Done

+

+

+

+Installing Heimdall Frontend from Source (Optional):

+

+    1. First make sure you have installed Qt 4.6 or above,

+       available from http://qt.nokia.com/.

+

+    2. Open a terminal and navigate to the directory you extracted Heimdall to.

+

+    3. Enter the following commands to compile and install Heimdall Frontend:

+

+            cd heimdall-frontend

+            qmake heimdall-frontend.pro

+            make

+            sudo make install

+

+       NOTE: You can use "checkinstall" instead of "make install" in order to

+      cd       generate a redistributable package.

+

+    4. Done

+

+

+

+Flashing Firmware with Heimdall Frontend:    

+

+    1. Fully charge your device (use the wall charger as it's faster).

+

+    2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.

+

+    3. If the ROM is provided as one of more archives (nested or otherwise),

+       extract them all to the same location.

+

+       NOTE: If you want to use the CSC then extract it last.

+

+    3. Open Heimdall Frontend.

+

+    4. Put your Galaxy S device into download mode.

+

+    5. For each file you wish to flash use "Browse" to select the file.

+

+    6. Press "Start".

+

+    7. Heimdall Frontend will display the progress and inform you when the

+       flash is complete.

+

+

+

+Flashing Firmware from Command Line / Terminal:

+	

+    1. Fully charge your device (use the wall charger as it's faster).

+

+    2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.

+

+    3. If the ROM is provided as one of more archives (nested or otherwise),

+       extract them all to the same location.

+

+       NOTE: If you want to use the CSC then extract it last.

+

+    4. Open a terminal and navigate to the directory where you extracted the

+       ROM files.

+

+    5. Type the following to list all the functionality Heimdall supports:

+

+            heimdall help

+

+    8. Use the instructions to manually enter a command with all the files you

+       want to flash.

+

+       Here is an example that does a full flash and repartition:

+		

+            heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin

+

+    9. Done

diff --git a/Linux/install-udev-rules.sh b/Linux/install-udev-rules.sh
new file mode 100755
index 0000000..1f2159d
--- /dev/null
+++ b/Linux/install-udev-rules.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+sudo echo "SUBSYSTEM==\"usb\", SYSFS{idVendor}==\"04e8\", SYSFS{idProduct}==\"6601\", MODE=\"0666\"" > /etc/udev/rules.d/60-heimdall-galaxy-s.rules
+sudo service udev reload
+exit 0
+